Jump to content

L2 Acp (Account - Admin Control Panel)


Recommended Posts

I've already noticed that a long time...
And in my previews reply I questioned that same point, and I left an example on how I think it should be  in case of an l2j mysql connection.
Should it look like this ? I couldn't connect either, so answers like your just beeing redundante don't help much, confirmation on the other hand help, like yes, or no, try it this way.
So I'll ask again, should it be like this?
 

connectionString_lin2world="Data Source=localhost;port=3306;Initial Catalog=SampleDB;User Id=mudassar;password=pass@123"

connectionString_lin2db="Data Source=localhost;port=3306;Initial Catalog=SampleDB;User Id=mudassar;password=pass@123"

 

because what is left there doesnt have login and password to connect to the database:

"ConnectionString_lin2world": "Data Source=PJASICEK-PC\\SQLEXPRESS;Initial Catalog=lin2world;Integrated Security=True",
    "ConnectionString_lin2db": "Data Source=PJASICEK-PC\\SQLEXPRESS;Initial Catalog=lin2db;Integrated Security=True",

from my breef contact with L2Off files I know there is a database lin2world and lin2db, on l2j there isn't one, so I'm a bit confused as to, am I looking at the proper place?

 

I've never worked on VIsual Studio to launch apps for webserver, so I'm learning, the same way I learned how to work with java, the difference is that on java there is a lot of documentation, or used to be, on asp.net regarding lineage 2 projects there isn't much.

 

If you could point me in the direction I need to go, I would really appreciate.

Thanks

Link to comment
Share on other sites

You don't need a db connection on l2j mode because it is done on the server side with the L2ACP-api https://github.com/Elfocrash/L2ACP-api

  • Thanks 1
Link to comment
Share on other sites

6 hours ago, francina said:

@Elfocrash for 50e can you install for my server? aCis based. How i can contact to you

if you cant install this better stop whatever you doing

Link to comment
Share on other sites

On 22/04/2018 at 10:17 PM, .Elfocrash said:

You don't need a db connection on l2j mode because it is done on the server side with the L2ACP-api https://github.com/Elfocrash/L2ACP-api

So the connection is made to the port 8000, to the api correct?
I have my website in a differente server than my gameserver.
However I'm not beeing able to get a connection to the api on the gameserver, port 8000 is open, I've even tryed with DMZ on.
Is there anything we need to do on the API ?
and yes, before you question the obvious, I'm not using http://127.0.0.1:8000/api, im using it with my gameserver ip.  http://gameserver_ip_here:8000/api

Problem solved

Edited by abumini
problem Solved
Link to comment
Share on other sites

When I run the gameserver with the API in it, and test the port 8000 to see if the application is listening, the report says it doesnt.

dumb question:
Does the website app needs to be on the same machine as the gameserver to be able to run the website application?

Problem solved, wrong number on NAS route. my bad....

Edited by abumini
Link to comment
Share on other sites

On 28/05/2017 at 9:01 PM, .Elfocrash said:

The ApiKey can just be changed as long as you change it in both the web and the api projects.

 

The error you are getting is probably illegal key size because you dont jave some needed jre libraries installed.

 

http://www.oracle.com/technetwork/java/javase/downloads/jce8-download-2133166.html

 

Download JCE here and unpack in Java/Jre/lib/security

is this inside Eclipse or on the operative system java folder?

Answer:
This must go inside the cliente that's running the ASP.net
Got it working.

It now seems so simple -.-'

Sorry about beeing a pane in the ass for some.

 

Edited by abumini
Problem solved
Link to comment
Share on other sites

  • 2 weeks later...

Hi again lol.
After getting it to work on windows, I embarqued on a new journey, trying to get it to work on linux!
And it hasn't been easy.

Anyone here who has this platform,  the website part, working with linux?

I could use some barinstorming or advices on what to use. 
And before you start posting links, I've already fallowed the one Elfocrash left from Microsoft on running .NET core project on apache

 

Link to comment
Share on other sites

I am looking for an payment collecting service implementation (an endpoint to which paypal redirects after payment and then after security checks grants credits to balance). Unless this service is already implemented :D

My skype: tejada2000

Link to comment
Share on other sites

3 hours ago, Mikel Alan said:

guys what wrong here , when i open the link in browser nothing showing

 

p_860tuzgu1.png

Your having permission errors, see if the user running the program has enought privileges.

Link to comment
Share on other sites

1 hour ago, abumini said:

Your having permission errors, see if the user running the program has enought privileges.

Thanks sloved 

 

now when i open the url the control panel not open what must be the right path ? 

 

my path %SystemDrive%\www\www.l2acpAr.com

 

Is there a specific folder that I should be specific to?
 

Link to comment
Share on other sites

  • 4 weeks later...

Can anyone help me with the configuration, I'm confused as to the ip and address of mssql
 


"ApiEndpoint": "http://127.0.0.1:8000/api",
 "ApiKey": "elfocrash",
 "CryptoKey": "MnFfhZdXUn3u49c7AaejOL8FN58meFb9",
 "CryptoSalt": "4XPjl3jiEITf",

 

does it stay or chance her?


   

"ConnectionString_lin2world": "Server=.\\SQLEXPRESS;Database=Lin2World;User ID=db;Password=123",    "ConnectionString_lin2db": "Server=.\\SQLEXPRESS;Database=Lin2DB;User ID=db;Password=147852@server",
    

.\\SQLEXPRESS = does it stay or chance here?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Posts

    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
    • or at least to tell you an update that sorry but still not at home.. 10 days is suspisious.. but he is long time offline from discord indeed... maybe something happened?
    • I never had problems with him. Again, Im not sure if he scammed or not. But 10+ days without answering after we already paid, its a bit sus. If you know you wouldnt be able to answer for a few days, after receiving and confirming the amount, why dont keep in touch? or just say "hey, dont send now because I will only be available after day x.".  
    • i used to ask him for stuff etc, i dont think he scammed ... if he does i will be suprised...
  • Topics

×
×
  • Create New...