Jump to content

Question

Posted

Καλησπέρα, μηπως θα μπορουσε καποιος να με βοηθησει, τι μπορει να πηγαινει λαθος; σηκνωνω τον σερβερ αλλα τιποτα δεν μπαινει εχω δει ποσα guides αλλα λυση δεν βρηκα.

image.png.ef1bdf9171bcccf44c0f198d34260a44.png

image.png.146a9684364c4f615eb21cb688a569d7.png

 

14 answers to this question

Recommended Posts

  • 0
Posted

9014 δε χρειαζεται να την ανοιξεις, δειξε μια φωτογραφια απο cmd, με την εντολή ipconfig /all

 

  • 0
Posted (edited)
27 minutes ago, Nightw0lf said:

9014 δε χρειαζεται να την ανοιξεις, δειξε μια φωτογραφια απο cmd, με την εντολή ipconfig /all

 

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Realtek PCIe GbE Family Controller
   Physical Address. . . . . . . . . : 10-BF-48-89-B1-47
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::798a:7956:99d0:8e6f%3(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.103(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCPv6 IAID . . . . . . . . . . . : 336641864
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-25-80-19-3B-10-BF-48-89-B1-47
   DNS Servers . . . . . . . . . . . : 192.168.0.1
                                       8.8.8.8
   NetBIOS over Tcpip. . . . . . . . : Enabled

Edited by DimiCxD3
  • 0
Posted

ok σωστά τα έχεις, το firewall των windows του εβαλες τις πορτες 2106 7777 στα εισερχομενα και εξερχομενα και σαν udp και σαν tcp; και επισης οταν το κανεις αυτο την ωρα που κανεις το τεστ αν εχουν ανοιξει ο σερβερ πρεπει να ειναι ανοιχτος για να απαντησει στο τεστ

  • 0
Posted
6 hours ago, Nightw0lf said:

ok σωστά τα έχεις, το firewall των windows του εβαλες τις πορτες 2106 7777 στα εισερχομενα και εξερχομενα και σαν udp και σαν tcp; και επισης οταν το κανεις αυτο την ωρα που κανεις το τεστ αν εχουν ανοιξει ο σερβερ πρεπει να ειναι ανοιχτος για να απαντησει στο τεστ

το γνωριζω αλλα ουτε καν μπορω να μπω περα οτι λεει οτι ειναι κ κλειστα, αυτα εδω σωστα δεν ειναι;

Capture.PNG

  • 0
Posted
9 hours ago, DimiCxD3 said:

το γνωριζω αλλα ουτε καν μπορω να μπω περα οτι λεει οτι ειναι κ κλειστα, αυτα εδω σωστα δεν ειναι;

Capture.PNG

το τεταρτο δεν χρειάζεται, το τρίτο μόνο αμα θέλεις να βάλεις στην σελίδα σου συνδέσεις για την βάση δεδομένων, το δεύτερο και το τρίτο πρέπει να ανοίξεις ακριβώς τα ίδια και με Protocol type UDP και μάλλων θα δουλέψει

  • 0
Posted

Όπως έχω πει και σε άλλους επειδή προχθές έπαθα το ίδιο εμένα λύθηκε με το αλλάξω μέσα στο port forward του router μου το WAN_Connection σε όλες της πόρτες από ATM_DSL σε PTM_DSL (έχω το Speedport της Cosmote), τσέκαρε το να δεις αν ανοίξουν.

  • 0
Posted
1 hour ago, Nightw0lf said:

το τεταρτο δεν χρειάζεται, το τρίτο μόνο αμα θέλεις να βάλεις στην σελίδα σου συνδέσεις για την βάση δεδομένων, το δεύτερο και το τρίτο πρέπει να ανοίξεις ακριβώς τα ίδια και με Protocol type UDP και μάλλων θα δουλέψει

τα εβαλα και σε udp αλλα τιποτα...

1 hour ago, NickAtsi said:

Όπως έχω πει και σε άλλους επειδή προχθές έπαθα το ίδιο εμένα λύθηκε με το αλλάξω μέσα στο port forward του router μου το WAN_Connection σε όλες της πόρτες από ATM_DSL σε PTM_DSL (έχω το Speedport της Cosmote), τσέκαρε το να δεις αν ανοίξουν.

δεν βρησκω να εχει κατι τετοιο μεσα....

  • 0
Posted

νομίζω οτι εξαντήσαμε αρκετές επιλογές επόμενο είναι να επικοινωνήσεις με τον παροχέα σου και να ζητήσεις να σου τις ανοίξουν αυτοί (και θα το κάνουν όπως είναι υποχρεωμένοι).

  • 0
Posted
4 hours ago, Nightw0lf said:

νομίζω οτι εξαντήσαμε αρκετές επιλογές επόμενο είναι να επικοινωνήσεις με τον παροχέα σου και να ζητήσεις να σου τις ανοίξουν αυτοί (και θα το κάνουν όπως είναι υποχρεωμένοι).

Θα καλεσω αυριο εαν ειναι κανενας εκει να δω τι θα μου πουνε

  • 0
Posted

επίσης, καθε χρόνο δικαιούσε (λίγοι το ξέρουν) νέο ρούτερ δωρεάν, επιστρέφεις το παλιό, αν δεν σου κάνει πάνε εκεί το θέμα θα κάνουν τους ανήξερους στην αρχή.

  • 0
Posted (edited)

anoi3e to "Cmd" as administrator,type~>ipconfig~>you need ipv4 adress μετά:

1:ports 7777,2106,80,9014,3306

2: Tα ports πρέπει να είναι στη κατηγορία "virtual server" ή στο  "port Forwarding"

3:internal άστο 127.0.0.1,external την ip adress σου(κάνε το αναζήτηση στο google : whats my ip adress)

4:Άλλαξε το internal and external και στα δυο αρχεία gameserver/config/network and loginserver/config/network

5:Άλλαξε το δικό σου l2.ini σε 127.0.0.1

6:Edit ένα l2.ini με την ip adress σου (κοίτα βήμα 3) 

7:Upload το system με l2.ini του ip σου 

8:Άνοιξε loginserver and gameserver

9:Τέλος, ελπίζω να βοήθησα.

 

Υ.Γ  * Στο system που θα κάνεις upload πρέπει να έχεις το IP σου,ώστε να μπουν οι άλλοι,ωστόσο στο δικό σου system το 127.0.0.1 για να μπαίνεις εσύ.

Επίσης σου έχω στείλει pm αν θες να το δούμε μαζί.

 

Have fun!

Edited by scraw
  • 0
Posted

η 80 και η 9014 δεν χρειάζεται. και αμα δεν έχεις κάποιο script που να θέλει την βάση του σέρβερ στην σελίδα σου ούτε η 3306.

  • 0
Posted (edited)

Οτι ναναι είναι οι routers των παρόχων αν θέλεις να κάνεις καμια δουλειά παραπάνω.. 

 

Σε τέτοιες περιπτώσεις κοιτάμε δύο πράγματα όσον αφορά το router του παρόχου.

Firewall και Port Forwarding.

 

Αν δεν ξέρεις ακριβώς πως παίζει το firewall στο router του παρόχου, εγώ λέω κλείσ'το για αρχή και εφόσον φτάσεις σε μια κατάσταση που "παίζει", το κάνεις και πιο secure. 

 

Άρα πρώτα κλείσε το firewall του router.

Μετά θες port forwarding. Θες να πεις στο router ό,τι έρχεται στο εξωτερικό interface (Internet) σε συγκεκριμένη θύρα να το στέλνει σε συγκεκριμένη εσωτερική IP και σε συγκεκριμένη θύρα.

Στην περίπτωση μας, μας ενδιαφέρουν 2 ports η 7777 και η 2106 (Εκτός και αν έχεις βάλει customs). Σε l2OFF αυτές είναι TCP οπότε δεν μπαίνω καν στον κόπο να κοιτάω για UDP. 

 

Αυτό είναι το UI του router της Cosmote (Internet->Security->Port Forwarding):

image.thumb.png.7042034c0ef04966eb30d93aee289f7f.png

 

Έστω ότι θέλουμε να κάνουμε port forward την TCP 7777 στην 192.168.0.103 (τον σερβερ σου).

Name: Δίνεις ένα όνομα (Ιδανικά TCP_7777_L2, αλλά έχει max characters 10......)

Protocol: TCP

WAN Connection: (Internet -> Status -> DSL Connection Status) Βλέπεις ποιό έχει Online Duration.

Σε εμένα είναι το ATM_DSL Πχ.

100.PNG.55ee99d786ba1cdbd756181cb06f22f7.PNG

 

WAN Host IP Range: Το αφήνεις έτσι. Αυτό σημαίνει όλες οι IPs όταν έρχονται στο router να τις κάνει port forward.

LAN Host IP Address: Η IP του server σου.

WAN Port Range: 7777

LAN Host Port Range: 7777

 

Και πατάς Apply. Μετά φτιάχνεις και νέο κανόνα αντίστοιχα για την Port 2106 (Ουσιαστικά αλλάζεις μόνο την WAN Port Range και την LAN Host Port Range).

 

Και εδώ τελειώσαμε με τον router του παρόχου.

 

Μετά όπως είπε και ο @Nightw0lf παίζει ρόλο το firewall του ίδιου του σερβερ.

Έστω ότι είναι Windows, πας Control Panel βρίσκεις το firewall:

Windows Defender Firewall with Advanced Security -> Windows Defender Firewall Properties

 

image.thumb.png.677ef34d9976f5490827c1fbe4550990.png

 

Domain Profile -> state το βάζεις Off

Private Profile  -> state το βάζεις Off

Public Profile  -> state το βάζεις Off

 

και πατάς OK. Με αυτό κλείνουμε τελείως το firewall των Windows αλλά αφού δούμε ότι παίζει μετά το ανοίγεις και παίζεις και με τους κανόνες για να επιτρέψεις μόνο τις επικοινωνίες που θες.

 

Τέλος, αν έχεις antivirus μπορεί να έχει και αυτό δικό του firewall. Πχ το ESET που έχω εγώ το κάνει. Κλείστο και αυτό τελείως για να κάνεις τους ελέγχους σου.

 

Τέλος, όταν πάρεις πρόσβαση στις πόρτες που θες πρέπει να φτιάξεις "σωστά" τα Router/Windows/Antivirus firewalls.

 

 

Edited by HugoBoss
  • Thanks 1
  • 0
Posted (edited)

Ενα μεγαλο μπραβο στον @HugoBoss για το αναλυτικο ποστ. Λοιπον οσοι εχετε κανει ολα τα υπολοιπα που αναφερθηκαν προσεξτε ενα μικρο detail που σε μενα δουλεψε. Αν εχετε Speedport Entry 2i στο port forward δοκιμαστε εκει που λεει protocol αντι για TCP/UDP σκετο το TCP και αντιστοιχα τα υπολοιπα.

 

Edited by LordPanic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Posts

    • What’s DatForge? Well… it’s a website I built initially to edit .dat files for Lineage 2… but not only that. Now it also handles: .dat, .ini, .htm, and .l2r files basically most Lineage 2 client data file types across 33+ chronicles. https://datforge.pages.dev/   Support / Reports / Anything Discord: https://discord.gg/5YwhBr5Dhx (use it for support, bug reports, or anything related to the project) Does it work for every version? No idea. I haven’t tested every single one… unless you want to volunteer. Do I plan to support every version? Yes. That’s the dream. Will that dream become reality? idk man, can’t promise shit. What’s coming next? (aka things I plan to do before I disappear) xdat editor .u editor / compiler / decompiler Let me sell you a dream real quick I will maintain this forever… probably… maybe… don’t quote me on that. Before you even start First requirement to use anything I build: you gotta be able to think. I won’t spend time drawing. Also… whoever said “there’s no such thing as a stupid question” was lying to make stupid people feel better. If you ask a stupid question, I will ignore it. PERIOD. Extra FAQ (since people will ask anyway) Am I looking for other pseudo AI coders/devs to join? Not really… unless you can actually add real value. Am I looking for people to manage a Discord server? Probably yes. I hate that crap. Will we be friends if you sign up? Not really. Will I do any changes on your L2J server if you sign up? No. Will I teach you how to code? No. How do you know if I’m legit? You don’t. FAQ (before you ask) What makes us different? There is no us. It’s just me. What makes me different? idk, you tell me. Why should you buy it? You probably shouldn’t. But if you want to… go ahead. How do I try it? Click the link. That’s it. Will the free account have everything? Read the pricing page. Don’t ask questions you can answer yourself. What if I find issues? I’m not your father, I won’t teach you how to use it. But if something is actually broken, post it and I’ll fix it. Why is it taking so long? Because you’re buying a tool, not hiring an employee. I work on it when I have time. If you want to pay my salary… we can talk (no promises). Am I an asshole like I sound? Not really. But people seem to like it, so I’m leaning into it. Will you share the source? Yes. Wait and see. If you're still here Congrats. Feel free to ask questions or suggest features. Just don’t come with crazy ideas, and remember: suggestions ≠ implementation. Bug reports If you report issues, they’ll most likely be fixed within a few hours… worst case a few days. Security issues / bypasses If you find something interesting, send me a PM with steps to reproduce. If it’s legit, you might get rewarded. “But if I don’t report it I can exploit it forever” …until I fix it myself and now you got nothing. Your call. Release dates When is xdat editor coming out? Soon. What day? Soon. What about .u files? Soon. Why no dates? Because this is not my full-time job. Pricing Do I need to pay to try it? No. There’s a free tier. If you want more, you can pay and unlock everything. Final note (before the “ooh but…” starts) This tool was built for me. I just decided to share it. I’m not a company. I’m not trying to live off this. But if you want a tool and don’t want to build it yourself… well… I already did 
    • report: scammer @nickathan he was a customer of me and this time i trusted him to send the files before i get paid .. he said in 1 hour he will give the money, i gave him space for 2 weeks , but he vanished! Proofs can be transmitted to @Celestine 
    • If they ask you to write something, you should ask for the full context. We had a private chat between the administrators of mxc and gx ext. He was allowed back on the forum on the condition that he did not spam unnecessary posts. As far as I'm concerned, it shouldn't be allowed because it involves multiple scams. We want and aim for a stronger community. He's not only doing this with this account, but with several, since this user has multiple accounts. As for what one user or another contributes, that's irrelevant; I often provide support to the community and I don't need to make it public. But I repeat, if they ask you to write a comment, just ask for the full context, nothing more than that. Or if you want a direct answer from me, feel free to message me privately so we can avoid spamming a post about an extender. That's the problem with second chances 
    • I currently have a working custom quest, but the problem is that I can't see it in the game's quest log. I've added it to questname-e.dat, but I still don't see it. I think there's another file where I need to add it, but I can't find it. For the items and skills I've added, I've always put it in the name and grp fields, but there's nothing related to questgrp.dat in the quest log. Could you tell me where I can add it?
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..