Jump to content
  • 0

PvP Flag When leaving a chaotic zone


Question

Posted (edited)

Hello once again dear users.

 

In every chaotic Zone (auto flag) out there, the target instantly loses the pvp flag when it leaves the pvp zone, instead of losing it the normal way, some 15 seconds afters (blinking purple/white). 

In my experience, that is not a good thing cause people will simply run out the zone to run from pvp.

I tried to fix that by using a few things, but none worked correctly. In my attempts so far, the target takes flag when runing out, but it will never go away. To make it disapear I need to relog.

Most of the times, that is what happens.

I looked in the SiegeZone.java to check how it worked there, and tried that as well, but in that case the Flag stays just for 1 second and disapear (But it works corrrectly when in siege).

In the shared MultiFunctionZone.java, it is set like this: 

 

            if(pvp_enabled)
                activeChar.stopPvPFlag();  (instantly removes the flag)

 

So I tried to use the same method used for siege zone:

 

            if (character instanceof L2PcInstance)
            {
                ((L2PcInstance) character).sendPacket(new SystemMessage(SystemMessageId.LEFT_COMBAT_ZONE));
                
                // Set pvp flag
                if (((L2PcInstance) character).getPvpFlag() == 0)
                {
                    ((L2PcInstance) character).startPvPFlag();
                }
            }
        }

 

But it doesnt work like in a siege zone.

 

I Also tried something like this:

 

                if (activeChar.getPvpFlag() != 0)
                    activeChar.setPvpFlag(0);
                activeChar.updatePvPFlag(1); 

With this, the target will get pvp flag when it run out the flag zone, but the flag will never go aways like it was intented.

 

Any help pls?

Im using l2jfrozen 1118

 

 

Edited by tiguz

Recommended Posts

  • 0
Posted

You have to add the player to the PvPTask, check normal behavior when player hit another player. L2PcInstance is the place you should check.

  • 0
Posted

you can see l2CastleZone on exit give flag after leave from zone size so

you can use this on enter. Every time you enter to your zone and player is not

flag he start task

                // Set pvp flag
                if (((L2PcInstance) character).getPvpFlag() == 0)
                {
                    ((L2PcInstance) character).startPvPFlag();
                }

end on exit no need he get time from task + config

  • 0
Posted
8 hours ago, ganjaradio said:

Could u send the On Exit? Maybe there you SetPvPFlag(0);

@Override
    protected void onExit(L2Character character)
    {
        character.setInsideZone(L2Character.ZONE_NOSUMMONFRIEND, false);
        character.setInsideZone(L2Character.ZONE_MULTIFUNCTION, false);
        
        if (character instanceof L2PcInstance)
        {
            L2PcInstance activeChar = ((L2PcInstance) character);
            activeChar.sendMessage("Attention: You left a PvP zone.");
            
            if(pvp_enabled)
                activeChar.stopPvPFlag();  
        }
    }

This is the original OnExit, thats stops the flag imediatly. I want to make it blink purple and white for some 15 sec.

  • 0
Posted (edited)
4 hours ago, wongerlt said:

setPvpFlagLasts(System.currentTimeMillis() + 3000);

time in ms

That method doesnt exist =/

Edited by tiguz
  • 0
Posted
2 minutes ago, tiguz said:

That method doesnt exist =/

PvpFlagTaskManager.getInstance().add((L2PcInstance) character, 5000); use this

  • 0
Posted
12 hours ago, tazerman2 said:

you can see l2CastleZone on exit give flag after leave from zone size so

you can use this on enter. Every time you enter to your zone and player is not

flag he start task

                // Set pvp flag
                if (((L2PcInstance) character).getPvpFlag() == 0)
                {
                    ((L2PcInstance) character).startPvPFlag();
                }

end on exit no need he get time from task + config

I tried with CastleZone method too, but it is the same as seen in a siege zone. With that method the flag lasts only 1 second.

  • 0
Posted
1 minute ago, Reborn12 said:

PvpFlagTaskManager.getInstance().add((L2PcInstance) character, 5000); use this

"PvpFlagTaskManager cannot be resolved" =/

  • 0
Posted
3 minutes ago, tiguz said:

l2jfrozen 1118

	@Override
	protected void onExit(L2Character character)
	{
		if (character instanceof L2PcInstance)
		{
			L2PcInstance player = character.getActingPlayer();
			player.setPvpFlagLasts(System.currentTimeMillis() + 3000);
			player.sendMessage("You Have Left The Chaotic Zone.");
		}
	}

 

  • Thanks 1
  • 0
Posted
7 minutes ago, Reborn12 said:

	@Override
	protected void onExit(L2Character character)
	{
		if (character instanceof L2PcInstance)
		{
			L2PcInstance player = character.getActingPlayer();
			player.setPvpFlagLasts(System.currentTimeMillis() + 3000);
			player.sendMessage("You Have Left The Chaotic Zone.");
		}
	}

 

Thank you for your response. I used your code:

    @Override
    protected void onExit(L2Character character)
    {
        character.setInsideZone(L2Character.ZONE_NOSUMMONFRIEND, false);
        character.setInsideZone(L2Character.ZONE_MULTIFUNCTION, false);
        
        if (character instanceof L2PcInstance)
        {
            L2PcInstance player = character.getActingPlayer();
            player.setPvpFlagLasts(System.currentTimeMillis() + 3000);
            player.sendMessage("You Have Left The Chaotic Zone.");
        }
    }

But like this, the target takes flag when he leaves the zone, but the flag never go away.. need to restart.

  • 0
Posted
16 hours ago, SweeTs said:

You have to add the player to the PvPTask, check normal behavior when player hit another player. L2PcInstance is the place you should check.

If you mean something like this:

          L2PcInstance player = character.getActingPlayer();
            player.setPvpFlagLasts(System.currentTimeMillis() + 3000);
            player.sendMessage("You Have Left The Chaotic Zone."); 

 

or this :

 

            L2PcInstance player = character.getActingPlayer();
            player.updatePvPFlag(0);
            player.sendMessage("You Have Left The Chaotic Zone.");

Does not work =/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Posts

    • - New Features in Anosim https://anosim.net -   You can now share your numbers with others via a unique link - no need to give them access to your account! How to Share Number https://prnt.sc/K83lxOjS-Fyb   How to Revoke Accsess: https://prnt.sc/jkVIQS2lhxvA   --- --- --- --- --- --- --- New OTP / SMS Activation Locations: - USA  - Australia - Honduras - Kenia
    • How to Create Multi-Accounts For TikTok, Youtube, Gmail....   Short Guide to Managing Multiple TikTok Accounts TikTok's anti-spam systems detect duplicate accounts via device IDs, IP addresses, and behavior. To avoid bans, follow these methods. 1. For 3-5 Accounts (Easiest) Use TikTok's built-in feature to add accounts in your app settings. Limitation: Frequent switching on the same device/IP can still trigger restrictions. 2. For Bulk Accounts (Safest) To make each account appear unique, you need to mask your digital footprint. Unique Emails & Proxies: Use a separate email and a residential/mobile proxy (e.g., MoMoProxy) for each account. Avoid free proxies. Anti-Detect Browsers: Use tools like AdsPower or Multilogin to create unique browser profiles, each with its own proxy and randomized digital fingerprint.   MoMoProxy Integrate with Adspower Browser   Process: In each unique browser profile, log into a separate Gmail and then create the TikTok account. 3. For One Device (Limited Use) Use app cloners like Parallel Space (Android) or Dual Space (iOS). Limitation: Not foolproof, as TikTok can sometimes detect cloned apps. Key Best Practices to Avoid Bans: Isolation: Use one proxy and one device/browser profile per account. Warm-Up: Act organically—watch videos, like, and comment—before posting content. Appear Unique: Use different usernames, bios, and profile pictures for each account. Avoid VPNs: Standard VPN IPs are often detected and flagged.   Youtube Video On How to Create TikTok Accounts  https://youtu.be/ZUihXj7BO4M  
    • How to Create Multi-Accounts For TikTok, Youtube, Gmail....   Short Guide to Managing Multiple TikTok Accounts TikTok's anti-spam systems detect duplicate accounts via device IDs, IP addresses, and behavior. To avoid bans, follow these methods. 1. For 3-5 Accounts (Easiest) Use TikTok's built-in feature to add accounts in your app settings. Limitation: Frequent switching on the same device/IP can still trigger restrictions. 2. For Bulk Accounts (Safest) To make each account appear unique, you need to mask your digital footprint. Unique Emails & Proxies: Use a separate email and a residential/mobile proxy (e.g., MoMoProxy) for each account. Avoid free proxies. Anti-Detect Browsers: Use tools like AdsPower or Multilogin to create unique browser profiles, each with its own proxy and randomized digital fingerprint.   MoMoProxy Integrate with Adspower Browser   Process: In each unique browser profile, log into a separate Gmail and then create the TikTok account. 3. For One Device (Limited Use) Use app cloners like Parallel Space (Android) or Dual Space (iOS). Limitation: Not foolproof, as TikTok can sometimes detect cloned apps. Key Best Practices to Avoid Bans: Isolation: Use one proxy and one device/browser profile per account. Warm-Up: Act organically—watch videos, like, and comment—before posting content. Appear Unique: Use different usernames, bios, and profile pictures for each account. Avoid VPNs: Standard VPN IPs are often detected and flagged.   Youtube Video On How to Create TikTok Accounts  https://youtu.be/ZUihXj7BO4M        
    • If you created it yourself for the first races just duplicate it in the same way for the other races (that is make the animations for the other races as well) and everything will work
    • OpenCV bot working for all l2 clients... but need special set for each server
  • Topics

×
×
  • Create New...

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock