Jump to content
  • 0

Hi Can Anybody Helps Me With This Error At Loginserver


Question

8 answers to this question

Recommended Posts

  • 0
Posted

I told you, leave them default / 127.0.0.1

You only have to edit external ip if you want let other ppl connect.

  • 0
Posted

can you send me your login and gameserver config?

Ok here Game server config

 

 

# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
ExternalHostname = 190.204.247.227

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# If this IP is resolvable by the Login Server, just leave *.
# ---------------------------------------------------------------------------
# Default: *
InternalHostname = 190.204.247.227

# Where's the Login server this gameserver should connect to
# Default: 127.0.0.1
LoginHost = 190.204.247.227

# Default: 9014
LoginPort = 9014

# Default: *
GameserverHostname = 190.204.247.227

# Default: 7777
GameserverPort = 7777


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 

# Default: 100
MaximumDbConnections = 100

# Default: 0
MaximumDbIdleTime = 0

# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = False

# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack

# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100

# Minimum and maximum protocol revision that server allow to connect.
# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.
# Default: 83
MinProtocolRevision = 1

# Default: 87
MaxProtocolRevision = 999


# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------

# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*

# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*

# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7 

and login server config

 

 

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 190.204.247.227

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 190.204.247.227

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname = 190.204.247.227

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = 190.204.247.227

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = 190.204.247.227

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = True

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False 

If u can help me :$ 

  • 0
Posted

Leave IPs default. You changed all of them to your external(?) IP and that's the problem.

So what u suggest to me ? To leave all ips by defaults ? If u can re-edit my login server and game server with the right changes ?

  • 0
Posted

Change the. Loginhost from gameserver to 127.0.0.1 and gameserverhostname too. And from loginserver change routerhostname, loginhostname, loginserverhostname to 127.0.0.1 and you are ready to run. Try it and tell us if it work.

Guest
This topic is now closed to further replies.


  • Posts

    • Vouch for @Ave i can say im very statisfied with the order I've made he was fast and reliable i totally recommend him to anyone who wants a decent updater with high quality design.
    • What can I say other than that I’m satisfied with the order I made. The guy is reliable and very good at what he does. I recommend him 100%.
    • Lineage2 Freya High Five @ Reshade with fog and rain etc @ Gracia final epilogue atmosphere   this reshade will eat lots of GPU power 50% or more of an RTX 3060 so be carefull depending on what effects are activated and their settings will eat even more GPU recomended 60hz monitor settings and via nvidia panel in Lineage2 game profile vsync settings to on effects are set up till film deck and the rest are not used but still working again this can eat alot of GPU Don't overheat GPU this is for freya high five but might work on others too copy in the  System  folder the folder  reshade-shaders  and the files  d3d9.dll  ReShade.ini  ReShadePreset.ini  ReShade.log  CccDddCcc.ini insert opens the menu and delete is on and of some settings need  ctrl + left click  to be changed   making another profile will reset the not activated effects to their default values so just copy the profile  CccDddCcc  and rename if needed also something needs to be closed from settings in game menu, the blur at distance and advanced shaders but keeping the advanced water effects all reflections   for those that don't like the h5 look of the sky and the red fog and rain and ambien red at night on all maps well if we want the cool gracia final epilogue back then we need to do this rename the  Maps  folder to Mapsretail or whatever copy the  Maps  folder from gracia final epilogue to h5 also we need the  L2_Skies.utx  from gracia final epilogue  Textures  folder to be replaced and also we need to do the same to the files  timeenv0.int  timeenv1.int  timeenv2.int  timeenv3.int  found in  system  folder   another setting that will probably be needed but not really tested out is to open file  option.ini  from  system  folder and add cachesize like this   [FirstRun] FirstRun=2   [Engine.GameEngine] CacheSizeMegs=512   also maybe is good to change those to 4.000000   [ClippingRange] Terrain=4.000000 Actor=4.000000 StaticMesh=4.000000 StaticMeshLod=4.000000 Pawn=4.000000       sorry bad english   https://mega.nz/file/aRNXxDrQ#mbxrNERBtW0XEEezK6w8-86oZWuX1k6NgtR6RZWKRVM   the compression on the video is kinda bad but meh    
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..