Jump to content

[Discussion]Intrepid


An4rchy

Recommended Posts

Intrepid go talk to Seth about the new c4 project.  :happyforever:

 

just downgrade aCis and you get c4 full retail like the official on a l2j engine :o

Link to comment
Share on other sites

It sounds cool when you say it, but isn't, I'm bored to explain it now.

 

Im bored too, but I will tell you smth, if you guys start developing a crappy c4 project, ur results will be unmatched even with an aCis downgraded c4 developed by a single guy. This is a dicussion I had on the past with Intrepid but he denied to understand because he was too stubborn. When you want to start a new project based on an old chronicle the best solution is to downgrade, simply because all projects atm are heavilly developed and too much ahead. Starting now on a c4 is like going back 10 years

Link to comment
Share on other sites

Im bored too, but I will tell you smth, if you guys start developing a crappy c4 project, ur results will be unmatched even with an aCis downgraded c4 developed by a single guy. This is a dicussion I had on the past with Intrepid but he denied to understand because he was too stubborn. When you want to start a new project based on an old chronicle the best solution is to downgrade, simply because all projects atm are heavilly developed and too much ahead. Starting now on a c4 is like going back 10 years

 

I tried to explain to that Seth tho, but he managed to change my opinion.

Link to comment
Share on other sites

Every intelude server is a pure garbage,doesnt matters the pack.

 

until L2Pride c6 comes into the discussion, still based on a crappy l2jfree, it dominated

Link to comment
Share on other sites

Im bored too, but I will tell you smth, if you guys start developing a crappy c4 project, ur results will be unmatched even with an aCis downgraded c4 developed by a single guy. This is a dicussion I had on the past with Intrepid but he denied to understand because he was too stubborn. When you want to start a new project based on an old chronicle the best solution is to downgrade, simply because all projects atm are heavilly developed and too much ahead. Starting now on a c4 is like going back 10 years

I can let interpid explain, why he doesn't want to work on acis.. but ill make it short.

 

First of all Acis, is done by kids really and an immature dwarf guy.(Actually they were my fanboys when i had l2jarchid) Then acis has code from everywhere specially freya, most of the pack, they have naive implementations of standardized l2j code. Its a lump of crap as a development standpoint.

 

Second of all, i wanna go back 10 years when the pack had the true l2j team, L2Chief, Nemesis and Luno, not these private server users turned developers like DC or _DS_ w/e the name.

 

In conclusion, i would of said more but i believe i got to the point i wanted, and there's not much more to say really, cause your gonna probably replay with smth stupid and irrelevant. So i'm just gonna post some quick features of the pack im gonna build with Trance and the others:

mmocore replaced with netty.io 4.x
Client packets handled in the netty.io connection thread
Server packets rewrite to make them safe and concurrent in the netty client writing thread
Dropping of knownlist and finally implementing an entity system. http://en.wikipedia.org/wiki/Entity_component_system
Plugin system.
Multi-client support: C6 adaptability
Code hotswap
Meta-programming support and Self-modifying code when needed, like in case of a dos attack.
(brief list for now)

And ofc, using my game development tools: https://github.com/Setekh (PS: i moved the projects to private, some of them might be incomplete).Start working on a new -beep-ing l2j Client. With deferred shading and my RavenClaw scene composer.

 

PS: Stop calling everything crappy, you didnt code it, and to put it differently you dont know me, between you and me there are 6 years of programming, and a knowledge base of over 6 major programming languages (C++, C and objective C, C#, Java, GLSL, Groovy, Python, Ruby, PHP ,ajax with Coffee, groovy and GWT). So don't start telling me how to do my project or name it before i do.

 

until L2Pride c6 comes into the discussion, still based on a crappy l2jfree, it dominated

L2jfree isnt crappy, it just annoyed the living crap out of retards that don't know how to setup maven xD

 

Later edit: Downgrading is turning smth that isnt into smth really retarded, do you even know how many packets op-code have been changed? and how many htmls or other static data? I'd rather code my own emu from ground up (which i did - for mu online) then editing like a fucking robot a thousand files and checking more, think before saying smth like that jesus >.>

Link to comment
Share on other sites

downgrading packets is fun, reworking from scratch what other teams have done years ago is sad xD

 

please....just keep your shitty useless opinion for yourself...your stupidity is annoying and it kinda makes me angry

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Posts

    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
    • or at least to tell you an update that sorry but still not at home.. 10 days is suspisious.. but he is long time offline from discord indeed... maybe something happened?
    • I never had problems with him. Again, Im not sure if he scammed or not. But 10+ days without answering after we already paid, its a bit sus. If you know you wouldnt be able to answer for a few days, after receiving and confirming the amount, why dont keep in touch? or just say "hey, dont send now because I will only be available after day x.".  
    • i used to ask him for stuff etc, i dont think he scammed ... if he does i will be suprised...
  • Topics

×
×
  • Create New...