This text say the following : open "/config/geoengine.properties" with your favorite text editor and then edit following configs:
   - GeoData = 2
   - GeoDataFormat = the one you have choosen
   - CoordSynchronize = 2
but in geoengine.properties text cant find this 3 (geodata, geodataformat, coordsynchronize) to change. Its not in text I checked very well. Please Help

Post all your Geoengine.Properties to tell you exacly what to do.

On 11/23/2020 at 9:53 PM, prostylw1 said:

This text say the following : open "/config/geoengine.properties" with your favorite text editor and then edit following configs:
   - GeoData = 2
   - GeoDataFormat = the one you have choosen
   - CoordSynchronize = 2
but in geoengine.properties text cant find this 3 (geodata, geodataformat, coordsynchronize) to change. Its not in text I checked very well. Please Help

They have been probably removed, which pack are u using?

L2D format is part of aCis, and since geodata is mandatory since multiple cycles those properties have been removed.

 

L2D format will be dropped on next revision, btw, due to the lack of uses of diagonal checks (was dropped from LoS few revs ago due to invalid purposes, and last use can be done from canGoN + canGoE).

 

Geodata will still be mandatory, and the readme fixed.

 

PS : also, some geopath issues will be fixed, notably heuristics, Z layer being called too high, the IOOBE over canSee/canMove, and maybe, if Hasha got time, the implementation of a Binary Heap to properly climb some specific spaces (Barakiel broken column, stairs with geodata below, etc).

Edited November 28, 20205 yr by Tryskell

problem solved thank you 

Topic locked