Jump to content
MaxCheaters Official Group on X
MaxCheaters Official Group on Discord

Cpu Overlocking

DnR

By DnR
in Off-Topics

 Share

Recommended Posts

DnR Apprentice

DnR

Posted
Posted (edited)

Hello.

I recently added an 1.8 Ghz CPU to my 2nd motherboard.

Accidentally, i figured out there are several guides to increase your CPU's Ghz.

In Youtube, i found many guides about my own proccesor, and that it can go up to 2.3 ghz.

 

Here is my question. Is it safe to overclock your CPU? Also, does this shorten CPU lifetime?

Edited by parizakis
Link to comment
Share on other sites
DnR Apprentice

DnR

Posted
  • Author
Posted (edited)

who cares if a 1.8 cpu dies or its dump warranty ?

 

People die, objects don't. This isn't an ethical discussion. It's my own proccesor, so i'm definitely the one who cares.

 

ofc it shortens cpu's lifetime, you push your system to work faster than normal. Also there are the warranty problems also....

 

 

propably you will also need a better cooling system for it

Yes, i thought of that, too.

Many guys got their cpu fried due to high temperature when tried this.

Also, i doubt it's worth increasing ghz by such amount and take such risks.

Anyway, computer is quite old, that's why i'm not wasting money to enhance it. I' ll use my micro-proccesor as long as possible.

Thank you very much for your advise. :)

Edited by parizakis
Link to comment
Share on other sites
ShuN^ Newbie

ShuN^

Posted
Posted

It will shorten it's lifetime if you mess with the Voltages and you don't know what you're doing.Overclocking will go up to a point, then you need to raise the voltage if you wanna get more and that's when things get more dangerous for your components.

Also, like they said above you will need a better cooler than stock.I don't think it will give you that high temps for this small OC though..

Link to comment
Share on other sites
DnR Apprentice

DnR

Posted
  • Author
Posted (edited)

That's interesting.

Well, attempted to overclock it according to guides found (entered bios chipset features and changed frequency), but it just stayed tuned at 1.8.

I have 1 GB Ram, so could lack of memory be the problem?

Edited by parizakis
Link to comment
Share on other sites
DnR Apprentice

DnR

Posted
  • Author
Posted

It will shorten it's lifetime if you mess with the Voltages and you don't know what you're doing.Overclocking will go up to a point, then you need to raise the voltage if you wanna get more and that's when things get more dangerous for your components.

Also, like they said above you will need a better cooler than stock.I don't think it will give you that high temps for this small OC though..

 

Thanks a lot for the information. :)

My motherboard does not provide a voltage setting.

However, after searching a lot, i managed to increase frequency from 1.8 to 2.1 (2070 to be more precise) by reducing DDR2 ram frequency from 533 to 400.

Temperature is still more than stable, as i can see. The cooler i'm using was part of the old processor, which had a lot higher frequency and memory cache, so i hope it'll do.

Core voltage seems stable, too.

Could my changes be a benefit or i'm still in the same condition due to lower ddr2?

Also, cpu multiplier is auto. Maximum is x9, but sometimes it's automatically reduced to x5. Is it safe to permanently set it to x9?

Link to comment
Share on other sites
ShuN^ Newbie

ShuN^

Posted
Posted (edited)

Thanks a lot for the information. :)

My motherboard does not provide a voltage setting.

However, after searching a lot, i managed to increase frequency from 1.8 to 2.1 (2070 to be more precise) by reducing DDR2 ram frequency from 533 to 400.

Temperature is still more than stable, as i can see. The cooler i'm using was part of the old processor, which had a lot higher frequency and memory cache, so i hope it'll do.

Core voltage seems stable, too.

Could my changes be a benefit or i'm still in the same condition due to lower ddr2?

Also, cpu multiplier is auto. Maximum is x9, but sometimes it's automatically reduced to x5. Is it safe to permanently set it to x9?

You need to check if your motherboard supports an overclocked CPU too.

Also after raising frequency you should run a stress test for your cpu (like prime95 or other stress test programs) and push it to it's maximum usage to see if it's stable.

Edited by ShuN^
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Posts

    • CodeAmaT
      .USM Lobby pack for GOD+ clients

      By CodeAmaT · Posted

      Thank you 😊👍 working great! 
    • MidnightSell
      ✅MidnightSell [Store/Buy/Sell/WoW Gold]✅Cheap/Secure/Lightin

      By MidnightSell · Posted

      MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • mecknoz
      [L2J] L2Custom

      By mecknoz · Posted

      GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • tynotgamer
      WIP Free Assasins Interface for Interlude

      By tynotgamer · Posted

      no free? i cant see link :(
    • Guarder
      Loginserver terminated abnormally!

      By Guarder · Posted

      Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    

  • Topics

×
×
  • Create New...