Jump to content
MaxCheaters Official Group on Discord
Top.MaxCheaters.com is now OPEN – Lineage 2 Top Listing
  • 0

Titan

Detroitas

Asked by Detroitas,

 Share

Question

Detroitas Iron Initiate

Detroitas

Posted
Posted (edited)

How to lower Titans damage? Because now with frenzy,zaelot to +20 give critical 18k damage, lol.

Acis 350 revision by 'Baggos' project

Edited by Detroitas

21 answers to this question

Recommended Posts

  • 0
Detroitas Iron Initiate

Detroitas

Posted
  • Author
Posted

decrease frenzy power... ? :D

<skill id="176" levels="3" name="Frenzy">
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>
<table name="#accCombat"> 2 4 6 </table>
<table name="#mpConsume"> 14 21 25 </table>
<table name="#stackOrder"> 1 2 3 </table>
<table name="#aggro"> 303 438 523 </table>
<set name="mpConsume" val="#mpConsume"/>
<set name="target" val="TARGET_SELF"/>
<set name="reuseDelay" val="600000"/>
<set name="hitTime" val="1500"/>
<set name="skillType" val="BUFF"/>
<set name="operateType" val="OP_ACTIVE"/>
<set name="aggroPoints" val="#aggro"/>
<cond msgId="113" addName="1">
<player hp="30" />
</cond>
<for>
<effect name="Buff" time="90" val="0" stackOrder="#stackOrder" stackType="pinch">
<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<using kind="SWORD,BIGSWORD,BLUNT,BIGBLUNT,POLE" />
</mul>
<mul order="0x30" stat="pAtk" val="#twohand">
<using kind="BIGSWORD,BIGBLUNT" />
</mul>
<add order="0x40" stat="accCombat" val="#accCombat">
<using kind="BIGSWORD,BIGBLUNT" />
</add>
</effect>
</for>
</skill>

what change here?

  • 0
melron Community Regular

melron

Posted
Posted (edited) 

<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<mul order="0x30" stat="pAtk" val="#twohand">

Change the values of the table you want (depends the weapon) , each table have 3 values cause of frenzy got 3 levels Do u get it ? ;)

By itself it increase 25% dmg for any weapon type (table #all , 3rd value , 1.25)

 

then the bonuses

 

<table name="#twohand"> 1.5 2 3 </table>

 

When two handed used ( level 1 frenzy, 50% p.atk. level 2 frenzy, 100% p.atk and level 3 frenzy, 200% p.atk (this 3 is 200%)

Edited by melron
  • 0
melron Community Regular

melron

Posted
Posted

So how to make it now? :D Bevause now 18k damage not good. :D Need about 7k max critical.

u can just decrease all these values /2 but this is not the best solution... better try to rebalance your custom items ....

  • 0
Detroitas Iron Initiate

Detroitas

Posted
  • Author
Posted

u can just decrease all these values /2 but this is not the best solution... better try to rebalance your custom items ....

server is no custom :D You can check if have time: www.l2aroma.com 

  • 0
Versus Iron Initiate

Versus

Posted
Posted

 

<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<mul order="0x30" stat="pAtk" val="#twohand">

Change the values of the table you want (depends the weapon) , each table have 3 values cause of frenzy got 3 levels Do u get it ? ;)

 

 

<table name="#twohand"> 1.5 2 3 </table>

 

When two handed used ( level 1 frenzy, 15% p.atk. level 2 frenzy, 20% p.atk and level 3 frenzy, 30% p.atk (this 3 is 30%)

 

Actually you are wrong.

That would be: lvl 1 -> 50% patk,  lvl 2 -> 100% patk, lvl 3 -> 200% patk.

 

To decrease it, change the values an example would be: 1.2 1.6 2.3 (20%, 60%, 130%)

  • 0
melron Community Regular

melron

Posted
Posted (edited)

Actually you are wrong.

That would be: lvl 1 -> 50% patk,  lvl 2 -> 100% patk, lvl 3 -> 200% patk.

 

To decrease it, change the values an example would be: 1.2 1.6 2.3 (20%, 60%, 130%)

okey got it :p

Edited by melron
  • 0
Versus Iron Initiate

Versus

Posted
Posted

I think you are wrong too :D i was too but..

 

as 1.2 means 120% ... 2.3 means 230% ...

 

1.5 = 50% , 2 = 200% 3 = 300 or no? :P

No.

 

Hahaha lol, so anyone wll tell me how to change it to got normal damage :D

I already told you at my post and gave you an example too. What melron said was also correct EXCEPT the part of his patk percents.

  • 0
melron Community Regular

melron

Posted
Posted

No.

 

I already told you at my post and gave you an example too. What melron said was also correct EXCEPT the part of his patk percents.

yy i edited this one thanks :p

  • 0
Detroitas Iron Initiate

Detroitas

Posted
  • Author
Posted 
<skill id="176" levels="3" name="Frenzy">
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>
<table name="#accCombat"> 2 4 6 </table>
<table name="#mpConsume"> 14 21 25 </table>
<table name="#stackOrder"> 1 2 3 </table>
<table name="#aggro"> 303 438 523 </table>
<set name="mpConsume" val="#mpConsume"/>
<set name="target" val="TARGET_SELF"/>
<set name="reuseDelay" val="600000"/>
<set name="hitTime" val="1500"/>
<set name="skillType" val="BUFF"/>
<set name="operateType" val="OP_ACTIVE"/>
<set name="aggroPoints" val="#aggro"/>
<cond msgId="113" addName="1">
<player hp="30" />
</cond>
<for>
<effect name="Buff" time="90" val="0" stackOrder="#stackOrder" stackType="pinch">
<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<using kind="SWORD,BIGSWORD,BLUNT,BIGBLUNT,POLE" />
</mul>
<mul order="0x30" stat="pAtk" val="#twohand">
<using kind="BIGSWORD,BIGBLUNT" />
</mul>
<add order="0x40" stat="accCombat" val="#accCombat">
<using kind="BIGSWORD,BIGBLUNT" />
</add>
</effect>
</for>
</skill>

how it's must looks?

  • 0
An4rchy Experienced

An4rchy

Posted
Posted 
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

Play with these values until you get a desired result.

 

Also I would not suggest to use latest free aCis since there are problems (mainly stackoverflow) which I doubt you can fix.

  • 0
Detroitas Iron Initiate

Detroitas

Posted
  • Author
Posted 
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

can u help me to change it? now it's totaly bad with fr 18k damage to +20 sets :D

Guest
This topic is now closed to further replies.
 Share
Go to question listing


  • Posts

    • RMTgold
      Buying & Selling Torn City Cash

      By RMTgold · Posted

      PAYPAL& BINANCE
    • RMTgold
      Buying & Selling POE & POE2 Divine-Mirrors

      By RMTgold · Posted

      PAYPAL& BINANCE
    • RMTgold
      Buying & Selling Wynncraft Stx

      By RMTgold · Posted

      PAYPAL& BINANCE
    • Atom
      Selling Interlude C6 Pack Based on L2Pride

      By Atom · Posted

      Update 
    • Povstalez
      Luniage - Interlude Unity Client

      By Povstalez · Posted

      Luniage - a custom Interlude client on Unity, with its own server Hi everyone. I've been quietly working on this for a long time and I think it's finally at the point where it's worth showing. Short version: it's Interlude, but the client and the server are both mine. The client is a custom one, built in Unity — not a patched or reskinned original. The server is written from scratch in C#. The only thing that comes from the old game is the content: the world, the models, the animations, the sounds, the icons, the interface art. The game looks and feels like the game you know. Everything underneath it is new. Why do this at all   Because the old client is a 2004 executable and anyone who has ever tried to add something to it knows exactly how that conversation ends. You can't add a window. You can't change how a skill looks. You can't fix a bug that's staring you in the face. Every server that wanted a feature of its own had to fake it through HTML dialogs and system messages, because the client simply won't bend. At some point it stops being worth fighting. I'd rather keep the game and rebuild everything around it. Where it is right now   You can sit down and play it. Not a tech demo, not a walk-around-and-look-at-the-trees build - an actual character. Most of the game is in: movement, combat, the skill system with its real formulas and timings, items and equipment, enchanting, shops and player trade, quests, parties, clans, and the whole interface that ties it together. Progression works from level 1 all the way through A grade - you can level, gear up, join a clan and run content today. What's missing isn't the foundation. It's the top end - and that's exactly where the work is pointed next.   Videos     What I'm working on now   Castle sieges and the Olympiad. The two biggest systems the game has, the ones that turn a working world into a server people actually stay on. And visual effects. They already run, but "runs" and "looks the way you remember it" are two very different things, and closing that gap turned out to be a much longer road than I expected. I'm going through them one by one. Does it run outside Windows   Yes. It's a Unity project, so Windows, Mac and Linux are just build targets. I actually develop on a Mac, which has kept the whole thing honest about staying portable. Will it work with my existing server   No, and it never will. The client talks to my server and nothing else - that's the trade I made, and it's the reason everything above is possible in the first place. If you're looking for a drop-in replacement client for a setup you already have, this isn't it. What's the goal   First and foremost, to launch my own project on it. That's what the client and the server are being built for, and that's what sets the priorities. Longer term, I'd like to open-source it. This community has spent twenty years working around a client nobody can touch, and I think the honest ending to this story is handing over something people can actually build on. I'm not putting a date on that - first it has to be good enough to be worth someone else's time. Can I try it   Not yet. When there's a build worth handing out, it gets posted here first. In the meantime I'll be posting progress regularly, and I read every reply. If you've run a server, built a client, or just spent a decade staring at this game and know exactly which detail everyone gets wrong — please say so. A good share of what's right in this project is right because somebody pointed at a screenshot and said "that's not how it looked." Thanks for reading.  

  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..