Jump to content

Question

Posted (edited)

How to lower Titans damage? Because now with frenzy,zaelot to +20 give critical 18k damage, lol.

Acis 350 revision by 'Baggos' project

Edited by Detroitas

Recommended Posts

  • 0
Posted

decrease frenzy power... ? :D

<skill id="176" levels="3" name="Frenzy">
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>
<table name="#accCombat"> 2 4 6 </table>
<table name="#mpConsume"> 14 21 25 </table>
<table name="#stackOrder"> 1 2 3 </table>
<table name="#aggro"> 303 438 523 </table>
<set name="mpConsume" val="#mpConsume"/>
<set name="target" val="TARGET_SELF"/>
<set name="reuseDelay" val="600000"/>
<set name="hitTime" val="1500"/>
<set name="skillType" val="BUFF"/>
<set name="operateType" val="OP_ACTIVE"/>
<set name="aggroPoints" val="#aggro"/>
<cond msgId="113" addName="1">
<player hp="30" />
</cond>
<for>
<effect name="Buff" time="90" val="0" stackOrder="#stackOrder" stackType="pinch">
<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<using kind="SWORD,BIGSWORD,BLUNT,BIGBLUNT,POLE" />
</mul>
<mul order="0x30" stat="pAtk" val="#twohand">
<using kind="BIGSWORD,BIGBLUNT" />
</mul>
<add order="0x40" stat="accCombat" val="#accCombat">
<using kind="BIGSWORD,BIGBLUNT" />
</add>
</effect>
</for>
</skill>

what change here?

  • 0
Posted (edited)

<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<mul order="0x30" stat="pAtk" val="#twohand">

Change the values of the table you want (depends the weapon) , each table have 3 values cause of frenzy got 3 levels Do u get it ? ;)

By itself it increase 25% dmg for any weapon type (table #all , 3rd value , 1.25)

 

then the bonuses

 

<table name="#twohand"> 1.5 2 3 </table>

 

When two handed used ( level 1 frenzy, 50% p.atk. level 2 frenzy, 100% p.atk and level 3 frenzy, 200% p.atk (this 3 is 200%)

Edited by melron
  • 0
Posted

So how to make it now? :D Bevause now 18k damage not good. :D Need about 7k max critical.

u can just decrease all these values /2 but this is not the best solution... better try to rebalance your custom items ....

  • 0
Posted

u can just decrease all these values /2 but this is not the best solution... better try to rebalance your custom items ....

server is no custom :D You can check if have time: www.l2aroma.com 

  • 0
Posted

 

<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<mul order="0x30" stat="pAtk" val="#twohand">

Change the values of the table you want (depends the weapon) , each table have 3 values cause of frenzy got 3 levels Do u get it ? ;)

 

 

<table name="#twohand"> 1.5 2 3 </table>

 

When two handed used ( level 1 frenzy, 15% p.atk. level 2 frenzy, 20% p.atk and level 3 frenzy, 30% p.atk (this 3 is 30%)

 

Actually you are wrong.

That would be: lvl 1 -> 50% patk,  lvl 2 -> 100% patk, lvl 3 -> 200% patk.

 

To decrease it, change the values an example would be: 1.2 1.6 2.3 (20%, 60%, 130%)

  • 0
Posted (edited)

Actually you are wrong.

That would be: lvl 1 -> 50% patk,  lvl 2 -> 100% patk, lvl 3 -> 200% patk.

 

To decrease it, change the values an example would be: 1.2 1.6 2.3 (20%, 60%, 130%)

okey got it :p

Edited by melron
  • 0
Posted

I think you are wrong too :D i was too but..

 

as 1.2 means 120% ... 2.3 means 230% ...

 

1.5 = 50% , 2 = 200% 3 = 300 or no? :P

No.

 

Hahaha lol, so anyone wll tell me how to change it to got normal damage :D

I already told you at my post and gave you an example too. What melron said was also correct EXCEPT the part of his patk percents.

  • 0
Posted

No.

 

I already told you at my post and gave you an example too. What melron said was also correct EXCEPT the part of his patk percents.

yy i edited this one thanks :p

  • 0
Posted
<skill id="176" levels="3" name="Frenzy">
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>
<table name="#accCombat"> 2 4 6 </table>
<table name="#mpConsume"> 14 21 25 </table>
<table name="#stackOrder"> 1 2 3 </table>
<table name="#aggro"> 303 438 523 </table>
<set name="mpConsume" val="#mpConsume"/>
<set name="target" val="TARGET_SELF"/>
<set name="reuseDelay" val="600000"/>
<set name="hitTime" val="1500"/>
<set name="skillType" val="BUFF"/>
<set name="operateType" val="OP_ACTIVE"/>
<set name="aggroPoints" val="#aggro"/>
<cond msgId="113" addName="1">
<player hp="30" />
</cond>
<for>
<effect name="Buff" time="90" val="0" stackOrder="#stackOrder" stackType="pinch">
<mul order="0x30" stat="pAtk" val="#all" />
<mul order="0x30" stat="pAtk" val="#swordbluntpole">
<using kind="SWORD,BIGSWORD,BLUNT,BIGBLUNT,POLE" />
</mul>
<mul order="0x30" stat="pAtk" val="#twohand">
<using kind="BIGSWORD,BIGBLUNT" />
</mul>
<add order="0x40" stat="accCombat" val="#accCombat">
<using kind="BIGSWORD,BIGBLUNT" />
</add>
</effect>
</for>
</skill>

how it's must looks?

  • 0
Posted
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

Play with these values until you get a desired result.

 

Also I would not suggest to use latest free aCis since there are problems (mainly stackoverflow) which I doubt you can fix.

  • 0
Posted
<table name="#swordbluntpole"> 1 1.5 2 </table>
<table name="#twohand"> 1.5 2 3 </table>
<table name="#all"> 1.15 1.20 1.25 </table>

can u help me to change it? now it's totaly bad with fr 18k damage to +20 sets :D

Guest
This topic is now closed to further replies.


×
×
  • Create New...

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock