Jump to content

Recommended Posts

Posted

 

 

 

2CsOK

why you post that ? :)  its forum that shows online per 1440 min..1440min is like  1day +++ close to 2

 

anyway i like the serv :)i think it will have prbly 2.5k-3k online whitch is pretty good :)

Posted

i am sorry again to repeat it.

 

But rly website is more time OFFLINE than ONLINE. I dont think is so good idea to launch the server, why so impatient?

Posted

2.5k - 3k is insane these days for old chronicles ! Maybe over 2k including boxes...

I'm going to agree with that.

Posted

A l2 server works awesome on SSD, but in fact it never uses not even 75% of its power. Therefore a SSD its not used on its full capacity....in my opinion thats just a useless hardware. For a l2 server what is most recomended is a Raid Master 0 made by two identical drives of 7.2k RPM on 64MB buffer, even this is more than enough for "any private l2 server". On a setup that i mentioned there is no posible way to have any IO bottle neck, the bottle neck you mentioned is valid only for the poor coded files based on a low-end server machine.

Having a SSD is just a show-off for the "eyes" of the players, tho real test is actually ingame.

Same goes for the 1Gb port, there is no private l2 server that has ever used the full capacity of a gigabit port, thats again a show-off scenario.

 

Posted

why you post that ? :)  its forum that shows online per 1440 min..1440min is like  1day +++ close to 2

 

anyway i like the serv :)i think it will have prbly 2.5k-3k online whitch is pretty good :)

1440 min close to 2 days ? 1440/60 = 24 hours;  you do know that 1 day has 24 hours do you ?

Posted

A l2 server works awesome on SSD, but in fact it never uses not even 75% of its power. Therefore a SSD its not used on its full capacity....in my opinion thats just a useless hardware. For a l2 server what is most recomended is a Raid Master 0 made by two identical drives of 7.2k RPM on 64MB buffer, even this is more than enough for "any private l2 server". On a setup that i mentioned there is no posible way to have any IO bottle neck, the bottle neck you mentioned is valid only for the poor coded files based on a low-end server machine.

Having a SSD is just a show-off for the "eyes" of the players, tho real test is actually ingame.

Same goes for the 1Gb port, there is no private l2 server that has ever used the full capacity of a gigabit port, thats again a show-off scenario.

 

 

A server with 1-1.5k will choke a SATA 7200 RPM drive (IOPS), and RAID 0 I gues you prefer that bit of extra speed over your players data which is no good. Now with 2 SSD you can use RAID 1 which gives you at least some redundancy and data security for your users and never worry about performance issues unlike the lowly 7200 which chokes at what 15-20k IOPS?.  Your post looks "Google Found" to me. I never said any server would use a 1gbit port but I will say that a server with 1.5-2k on will reach a 100mbit cap and people will lag...badly. We went with 1gbit to make sure that people don't get lagged out hitting the 100mbit cap. It is called forsite.

Posted

A server with 1-1.5k will choke a SATA 7200 RPM drive (IOPS), and RAID 0 I gues you prefer that bit of extra speed over your players data which is no good. Now with 2 SSD you can use RAID 1 which gives you at least some redundancy and data security for your users and never worry about performance issues unlike the lowly 7200 which chokes at what 15-20k IOPS?.  Your post looks "Google Found" to me. I never said any server would use a 1gbit port but I will say that a server with 1.5-2k on will reach a 100mbit cap and people will lag...badly. We went with 1gbit to make sure that people don't get lagged out hitting the 100mbit cap. It is called forsite.

You can use a SSD or a Raid Master 0 via 2xSSD's and your server will never use the SSD potetial, since there is no need for that much raw power ( C5 yO not GOD )

A C4 C5 C6 server would never choke if the server specs would be set on a 7.2k rpm raid master 0, even with 5 k online its simply imposible.

Do you really think i base my words on google ? Sorry but i base my words on my experience. Use your SSD's and your gigabit port, before live use a hdd stat monitor, watch how your mighty ssd's max the hdd speeds on 60% (max).

What 100mb cap do you mean ? Most hosting companies mention 100mbps on download/upload, but the bandwidth is unlimited ( not at every company ), if the bandwidth is unlimited a gigabit port is useless. Plus there wont be any 100mb up/down by player base gameplay on a l2 server.

And about internet speeds even on 100 or 1000 mb port net-pipe flooding will be inevitable in any attack attempt. But still a gigabit port is more than welcome.

People will lag no matter if you have a gigabit port or not, it depends on their connection streaming towards your server. Who knows maybe you will use a re-routing proxy and yet there wont be any guarantees to have or not lags.

What you specificy about SSD and Gigabit port is good, no...its great, but what im saying is that it what you got or will get wont be used on its full power.

Good luck tho.

Posted

i am sorry again to repeat it.

 

But rly website is more time OFFLINE than ONLINE. I dont think is so good idea to launch the server, why so impatient?

not sure what you talking about, but its not 1week advers server..personaly i see it many weeks..

 

about site, just 2days off ,i hope they fix it :D

Posted

You can use a SSD or a Raid Master 0 via 2xSSD's and your server will never use the SSD potetial, since there is no need for that much raw power ( C5 yO not GOD )

A C4 C5 C6 server would never choke if the server specs would be set on a 7.2k rpm raid master 0, even with 5 k online its simply imposible.

Do you really think i base my words on google ? Sorry but i base my words on my experience. Use your SSD's and your gigabit port, before live use a hdd stat monitor, watch how your mighty ssd's max the hdd speeds on 60% (max).

What 100mb cap do you mean ? Most hosting companies mention 100mbps on download/upload, but the bandwidth is unlimited ( not at every company ), if the bandwidth is unlimited a gigabit port is useless. Plus there wont be any 100mb up/down by player base gameplay on a l2 server.

And about internet speeds even on 100 or 1000 mb port net-pipe flooding will be inevitable in any attack attempt. But still a gigabit port is more than welcome.

People will lag no matter if you have a gigabit port or not, it depends on their connection streaming towards your server. Who knows maybe you will use a re-routing proxy and yet there wont be any guarantees to have or not lags.

What you specificy about SSD and Gigabit port is good, no...its great, but what im saying is that it what you got or will get wont be used on its full power.

Good luck tho.

well you dont need NASA pc for L2 Server its true.. mostly you have to care if you have some mistake at files that can makes server lag..and one more ..ddoss protection..prbly it will give some delay to players .it depends whitch protection you have ..its not that easy to find some good stable ddoss protection with normal gameplay and not delays..

im not talking under attack, im talking when server running ok without prob

but as the guy said, you can add proxy  for those who have lag..

or atleast  1 germany proxy so no lags..i think germany its ok for most ppls..if not..add one more  in other country

 

but if ddoss protection its good you will not need any proxy

Posted
And about internet speeds even on 100 or 1000 mb port net-pipe flooding will be inevitable in any attack attempt. But still a gigabit port is more than welcome.

 

The 1 gbit port was not for helping with an attack but because we will use over 100mbit/sec at launch and for sieges/masspvp. Granted the 1gbit port gives a little more freedom on a very small attack but I would never get a 1gbps port because of that as it would be a waste. We are now on a actual ddos protected network that specializes in mitigation. So hopefully that will not be a issue.

 

People will lag no matter if you have a gigabit port or not, it depends on their connection streaming towards your server.

 

Yes there will always be people that lag but it won't be due to any bandwith limitation and our line being saturated. it will be because of routing/latency caused by location and their ISP routing or possibly even routing on our end but we do have the ability to work with the DC on our BGMix.

 

What you specificy about SSD and Gigabit port is good, no...its great, but what im saying is that it what you got or will get wont be used on its full power.

 

I agree with you completely, we will not. But I would rather have too much than not enough :)

 

Good luck tho.

 

Thanks  ;D

 

I will not be offering any alternate proxy routing for live. It includes massive research and testing to get the right spot for the majority and I won't have time.

 

If people have any latency issues I would suggest the "Leatrix Fix", battleping, or wtfast. Leatrix is free so try it first (not a proxy) the others are paid (prox). All 3 can do the job depending on the cause of latency.

 

Dradden

Guest
This topic is now closed to further replies.



  • Posts

    • cRazy??? If i just say good job its not even fair....
    • τι εκανες εκει παλι ρε τρελάρα; 🤣   welcome back mate, happy seeing you online again, well thats beyond l2 needs for sure and It’s rare to see anyone pushing Interlude this far technically anymore without trying to monetize it. definitely interested in seeing the source whenever you're ready to share it! keep it up!
    • your only choice brother cmon https://www.l2jsunrise.com/
    • Hello everyone  How are you all doing? I'd like to share with the community an open-source project I've been working on intensely: the **L2 Phantom AI Manager**. Tired of those static bots that just stand still in the city or sink into the map because of Geodata? Me too! That's why I developed a modular Phantom system with real Artificial Intelligence, initially designed for **L2J Mobius Essence (RoseVain)**, but which can be adapted to other chronicles. Main Features Modular architecture: the system is split into focused files such as PhantomAI, PhantomEngine, PhantomFactory, PhantomEquipment, PhantomHuntingSpots, PhantomGeo, PhantomMenu, and more. Automatic creation: create 10 or 50 phantoms from the menu or commands. XML persistence: automatically created phantoms are saved into PhantomPlayers.xml, so they keep loading after server restarts. Batch startup: .pstart and Start 10 load only 10 phantoms at a time. Batch disconnect: disconnect 10 active phantoms without shutting down the whole system. Origin towns: new phantoms spawn using PlayerTemplate.getCreationPoint(), respecting race and class. Geodata-safe spawning: spawn points use NPC-like coordinate validation to avoid under-map or floating characters. Real datapack spots: reads data/stats/npcs and data/spawns to build level-based hunting locations. Bad target filtering: ignores Training Dummy, tutorial objects, chests, and fake farm targets. Smart relocation: if a phantom cannot find useful mobs, it relocates to another spot for its level. Level goals: phantoms receive leveling goals, return to town, recover resources, and go back to farming. Mage MP rest mode: mages rest until MP is recovered; in PvP they try to escape when out of mana. Skills and buffs: phantoms try to use offensive skills and self buffs such as Might, Shield, Focus, Haste, Empower, Acumen, Wind Walk, Chant, Song, and Dance. Varied gear packs: gear packs by grade for mages and fighters, with multiple variants to avoid visual clones. Automatic shots: randomized Soulshot and Spiritshot restocking by class and grade. Inventory cleanup: unnecessary items are removed automatically while preserving Adena, shots, and equipped gear. PvP and PK behavior: some phantoms are aggressive, may become PK, and attacked phantoms try to defend themselves. Optional AI chat: optional Google Gemini integration for short social replies. TXT logs: the menu displays log state and can enable/disable logging. GM Menu Use .pmenu to open the control panel. Current options: Start 10 Disconnect 10 Create 10 Create 50 Reload XML Stop All Enable Log / Disable Log The menu also shows: active phantom count; XML ID count; current TXT log state. Commands .pmenu - opens the control panel. .pstart - starts 10 phantoms from XML. .pstop - removes all active phantoms. .pstop10 - disconnects 10 active phantoms. .pload - reloads PhantomPlayers.xml. .pcreate 10 - creates, starts, and saves 10 phantoms to XML. .pcreate 50 - creates, starts, and saves 50 phantoms to XML. .pm Name Message - sends a private message to a phantom. .pdebug - toggles TXT logging. Logs Logs are created in the GameServer log/ folder: log/PhantomManager.txt - global historical log. log/PhantomManager-yyyyMMdd-HHmmss.txt - separate log for each session. Useful logged events include: new level goals; travel to hunting spots; town rest; mob attacks; PvP defense; shot restocking; inventory cleanup; AI exceptions with stacktrace. Main Files PhantomManager.java - commands, logs, and bootstrap. PhantomEngine.java - start, stop, spawn, respawn, batches, and AI loop. PhantomAI.java - farm, PvP, PK, rest, targeting, and movement decisions. PhantomConfig.java - routes, gear, shots, and XML persistence. PhantomFactory.java - automatic character creation. PhantomEquipment.java - buffs, progression, shots, and inventory cleanup. PhantomHuntingSpots.java - real datapack NPC/spawn loader. PhantomGeo.java - geodata-safe coordinate handling. PhantomState.java - temporary phantom memory. PhantomMenu.java - GM HTML panel. PhantomBypass.java - menu button handling. PhantomChat.java - messages and optional Gemini integration. Copy custom/PhantomManager into: dist/game/data/scripts/custom/PhantomManager/ Place PhantomPlayers.xml in: game/config/Custom/PhantomPlayers.xml Compile scripts or restart the GameServer. Use .pmenu to create, start, and manage phantoms. https://github.com/miacodeweb/L2-Phantom-AI
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..