d3d051 Posted January 8, 2008 Posted January 8, 2008 This is my way to configure a walker for a C4 server, it worked for me since most servers got "walker protection) 1st Step: Getting the ip address First of all, you are gonna need this file: http://rapidshare.com/files/80401201/Lineage____File_Edit.rar.html It's a program called Lineage 2 File Edit (with this program you can edit many l2 files, but we are not going to do that) Now, open the program and click on "open and decrypt". Go to your Lineage System folder and open L2.ini, so it would look like this After that copy the ip address (server addr) into ur set.ini. after LoginServerIP= Mine would look like this 2nd Step: Getting the port and protocol version In most servers the common port and protocol versions are 2106 (Port) and 656 (Protocol Version) U could try just by "jumping this step" and if it fails get back to here. You could also make Step 2 and 3 togheter, but it's easyer to explain separeted You are gonna need L2Phx (yes, it's a packet hack program) Download Link http://rapidshare.com/files/82118092/l2phx-dist.rar.html Now, extract it and open it. Open Lineage 2 and try to login (write any account and password) Go to phx and you will see this: It's the IP and port of the server (sometimes PHX doesn't work, that's why I made step 1) Now, Login up to the character selection screen and go again to phx. Click where it says packet sniffer and you will see a packet called ProtocolVersion (that's what we are looking for) Now, look at the image below Now, we must copy the port and protocol version to our set.ini so, now it would be like this: 3rd Step: Getting the Token KEY You will need this: http://rapidshare.com/files/82119678/TOKEN.rar.html This contains 2 programs: Cprocess and xvi32 Cprocess shows u every program that your pc is using and everything that programs are using, and xvi32 is an hex editor. Now, open Cprocess and then open L2 U can do this while L2 is opening (this would be necesary if ur l2 server "hides" the L2 Process) or after it has opened. Don't even login, just go to Cprocess and look for the process called l2.exe (it should be at the bottom of the list) now, select it and search for the MODULE called Engine.dll (wich contains the token key) Just in case u don't know wich are the process and wich are the modules: now right click on engine.dll and click on dump memory Now, set the location where it will be "dumped" and check binary file (just if it's not checked) Now click on "Dump memory". After it finishes dumping, you can close L2 and Cprocess. Now go to Xvi32. Open it. Now Press Ctrl+O and open the Dump file u have created with Cprocess. Now, press Ctrl+G. Check go to "hexadecimal" and go mode "absolute" Under "hexadecimal" u have to be sure that it says exactly this $62531C if it doesn't, just copy and paste it in that blank. Then click OK. It'll mark a square and that square with the following 19 squares are the "TOKEN" (press shift and tap the right arrow 19 times so u will have the whole token in red) It would look like this: Now, after u marked the whole token, click on "edit", "clipboard" and click on "copy as hex string" Now go to ur options.ini file in the l2walker directory and paste it in the TOKEN line. It would be like this: now, login and enjoy. I've been a long time writing this guide, so I hope it would be helpfull Cya
Unstopable Posted January 8, 2008 Posted January 8, 2008 excellent guide, well written and easily understandable.
d3d051 Posted January 8, 2008 Author Posted January 8, 2008 On 1/8/2008 at 5:35 AM, lecassis said: jajajaj Gravedad Zero... PLAGA :P No hagas spam ENGLISH: DO NOT SPAM! PD: si es de gz y q? = yo no juego GZ, pero el walker anda :P
d3d051 Posted January 8, 2008 Author Posted January 8, 2008 On 1/8/2008 at 3:51 PM, Intense said: Greate guide for newbies like me :) That's why I wrote it. mmm, I think this should be stickyed. If not, I've just wasted 2 hours of my life making this guide :)
DrenepiaWorld Posted January 8, 2008 Posted January 8, 2008 Your guide its just perfect :P It is very easy for newbies to make their own walkers now :P +1 from me
kenshin52 Posted January 8, 2008 Posted January 8, 2008 nice guide dude it´s easy to understand and the steps are also easy..... Good job man
d3d051 Posted January 9, 2008 Author Posted January 9, 2008 Yes, I think it must be sticky, but seems that no admin/moderator has seen it yet :(
Hax0r Posted January 9, 2008 Posted January 9, 2008 Gf! Imba guide... really deserves to go sticky. Nice one d3d!
d3d051 Posted January 11, 2008 Author Posted January 11, 2008 On 1/11/2008 at 1:04 AM, mojo said: can you make the same for ct1? No, I just know how to configure walker for C4, and I don't even have the CT1.
heybroftw Posted January 11, 2008 Posted January 11, 2008 Thank you so much for spending your time in writting out this guide. I was going to make a thread in the help section for an OOG walker for an C4 server BUT this should hopefully solve my problem. Thank you very much :D Give this guy a +1 *EDIT* By the way, the offset. Is that always the same or different for different tokens?
Recommended Posts