Jump to content

Critical Error FAQ


Recommended Posts

Common Critical Errors and their Solutions

 

Error: History: FL2GameData::ObsceneDataLoad <- FL2GameData::Load() <- UGameEngine::Init <- InitEngine

 

Cause: The client cannot properly load banned messages.

 

Solution: Delete obscene-e.dat in your C:\Program Files\Lineage II\system folder and run L2.exe again.

 

--------------------------------------------------

 

Error: General protection fault! History: UOrcMove::CalculateCRC32 <- UGameEngine::Init <- InitEngine

 

Cause: The client is missing one or more vital files that are required to load the game. You have not installed the patch or updater properly, you have accidently deleted files, or you are not using the right Chronicle.

 

Solutions: 1. Make sure none of your folders are empty; ie. systextures, staticmeshes, textures, animations.

███████ 2. If found to be empty, reinstall Lineage 2 after completely removing the client via Control Panel -> Add or Remove Programs.

███████ 3. If step 2 does not work, download a fresh Lineage2 installer from [Link 1].

--------------------------------------------------

 

Error: Negative delta time! History: UGameEngine::Tick <- UpdateWorld <- MainLoop

 

Cause: Your Lineage 2 client could not properly read your CPU clock speeds. This usually only happens with AMD processors.

 

Solutions: 1. Download the [AMD Dual Core Optimizer] program and install it.

███████ 2. Download this >XP ONLY< hotfix from the official Windows website (Genuine Windows XP required). [Link 1]

 

--------------------------------------------------

 

Error: Failed to enter Entry: Can't find file 'Entry'. History: UGameEngine::Init <- InitEngine

 

Cause: Your client is missing one or more required files to launch the game. This may also occur if you install the L2 Server patch onto the wrong version of the game (Hellbound, Gracia, C5, etc).

 

Solutions: 1. Install the patch in the MAIN Lineage II folder, not the system folder or anywhere else. Installing it in the wrong place can cause this error.

███████ 2. Update your video card drivers to the latest stable ones.

 

--------------------------------------------------

 

Error: Application failed to initialize properly

 

Cause: This usually appears when you are using modded video card drivers, very outdated video card drivers, do not have the .NET Framework installed, or any combination of the three.

 

Solutions: 1. Update your video card drivers to the latest stable ones.

███████ 2. Download and install the .NET Framework 2.0 [Link 1] (Genuine Windows XP/Vista required).

 

--------------------------------------------------

 

Error: General protection fault! History: UObject:: DissociateImports <- UObject::EndLoad <- UObject::StaticLoadObject <- (Engine.SkeletalMesh =anything can be here=) <- IsLoadedResource <- User::SetPawnResource <- UNetworkHandler::Tick <- Function Name=NpcInfoPacket <- UGameEngine::Tick <- UpdateWorld <- MainLoop

 

Cause: This is 99% of the time caused by video card drivers being unable to load textures, or it can be very rarely caused by a missing texture.

 

Solutions: 1. Update your video card drivers to the latest stable ones.

███████ 2. If step 1 does not work, do some searching to find out what driver versions work best for your video card. In my case and many others, the latest drivers have caused issues, and older drivers work much better.

 

--------------------------------------------------

 

Error: History: FArchiveFileReader::Seek <- ULinkerLoad::Seek <- TLazyArray<< <- FMipmap<< <- SerializeMips <- UTexture::Serialize <- LoadObject <- (Texture LineageMonstersTex.death_knight.death_knight_t00 99684524==99684524/133323252 99683358 132383) <- ULinkerLoad::Preload <- PreLoadObjects <- UObject::EndLoad <- UObject::StaticLoadObject <- (Engine.Texture LineageMonstersTex.Death_Knight_T00 NULL) <- UOrcMove::CalculateCRC32 <- UGameEngine::Init <- InitEngine

 

Cause: You have a corrupt texture, potentially from another private server that doesn't know how to create a proper patch or from an action you have done yourself.

 

Solutions: 1. download a fresh Lineage2 installer from [Link 1].

███████  2. If step 1 does not work, reinstall DirectX 9.0c and update your video card drivers to the latest stable ones.

 

--------------------------------------------------

 

Error: History: NConsoleWnd::RequestAuthLogin <- NCAuthWnd::OnLoginBtnClick <- NCAuthWnd::OnPasswordDone <- NControl::SendEventMessage <- NCEditBox::OnKeyDown <- NCVirtualWndMain::PassToFocusedWindow <- NCVirtualWndMain::PassToFocusedWindow <- NCVirtualWndMain::PassToFocusedWindow <- NCVirtualWndMain:ispatchWndMsg <- NConsoleWnd:ispatchWndMsgX <- NConsoleWnd:ispatchWndMsg <- UWindowsViewport::ViewportWndProc <- WWindow::StaticProc <- DispatchMessage <- 006903B0 256 <- MessagePump <- MainLoop

 

Cause: Another program is intercepting your connection with the Auth server when you click 'Login'. This can be from almost anything.

 

Solutions: 1. If you have an anti-virus program such as AVG, disable all active protection while logging in and enable it again only once you are ingame.

███████ 2. If you have another Lineage 2 client open of a different chronicle (ex. logged into a Gracia Final Part 2 server while trying to login to Interlude one), close the other client and restart your client. Also close any other games that utilise an anti-cheat program, whether it be Gameguard, nProtect, etc. You should now be able to login.

███████ 3. Go to C:\WINDOWS\system32\drivers\etc and open the file 'hosts' with notepad. Other than all lines starting with the character '#', make sure that this is the only line there:

Code:

 

127.0.0.1  localhost

 

Unless you have added other lines there and know what you are doing, you can leave those, but delete all lines with L2authd.lineage2.com, L2testauthd.lineage2.com, auth.lineage2.com.tw, auth.lineage2.jp, L2auth.Lineage2.in.th, L2auth.Lineage2.ph, or anything else you see that relates to Lineage 2 Auth.

__________________

 

 

Credits to Inspire.

And me for Posting here :)

 

p.s. Hopefully for a Sticky!

Link to comment
Share on other sites

post is really useless imo..just install again the client and patch and u will be ok.

 

If the patch got errors, and you dont know where the error is, with this tips you can find out.

 

Also, can be an outdated driver, or missing program...isnt only a "client" & "patch" thing.

;)

Link to comment
Share on other sites

Cause: Another program is intercepting your connection with the Auth server when you click 'Login'. This can be from almost anything.

 

127.0.0.1  localhost

 

Unless you have added other lines there and know what you are doing, you can leave those, but delete all lines with L2authd.lineage2.com, L2testauthd.lineage2.com, auth.lineage2.com.tw, auth.lineage2.jp, L2auth.Lineage2.in.th, L2auth.Lineage2.ph, or anything else you see that relates to Lineage 2 Auth.

 

 

this is a very usual error and finally know why, really useful guide.

 

up for this

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Posts

    • Thank you 😊👍 working great! 
    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...