Jump to content

[Βοήθεια]Δίσκος Για Windows


'Baggos'

Recommended Posts

Παίδες θέλω να σας ρωτήσω κάτι...

Βρήκα από έναν φίλο μία καλή μονάδα, και θέλει να μου την δώσει... Όμως, μέσα δεν υπάρχουν καθόλου Windows.

Εάν πάρω ένα άδειο CD και γράψω μέσα τα Win7, μέσω Boot μετά θα τα βρω κανονικά για να τα εγκαταστήσω? ή θέλει τίποτα άλλες μαγκές μετά?

Αλλιώς να το κάνω με Flashaki, όπως είχα κάνει παλιά σε Notebook..

 

Κάτι ακόμη.. αυτή την στιγμή έχω πυργάκι, το μηχάνημα που θα πάρω είναι κανονική μονάδα, αν περάσω το τροφοδοτικό στον καινούριο, παίζει να πάθει τίποτα?

 

Ευχαριστώ εκ των προτέρων...

Edited by 'Baggos'
Link to comment
Share on other sites

Παίδες θέλω να σας ρωτήσω κάτι...

Βρήκα από έναν φίλο μία καλή μονάδα, και θέλει να μου την δώσει... Όμως, μέσα δεν υπάρχουν καθόλου Windows.

Εάν πάρω ένα άδειο CD και γράψω μέσα τα Win7, μέσω Boot μετά θα τα βρω κανονικά για να τα εγκαταστήσω? ή θέλει τίποτα άλλες μαγκές μετά?

Αλλιώς να το κάνω με Flashaki, όπως είχα κάνει παλιά σε Notebook..

 

Κάτι ακόμη.. αυτή την στιγμή έχω πυργάκι, το μηχάνημα που θα πάρω είναι κανονική μονάδα, αν περάσω το τροφοδοτικό στον καινούριο, παίζει να πάθει τίποτα?

 

Ευχαριστώ εκ των προτέρων...

Katevase ta windows ama den ta exeis se arxio image kai meta katevase to programma ton windows pou legete nomizo win to usb pernaei apeutheias to arxio image mesa sto flashaki kai to kanei bootable des ama ta Bios ipostirizoune prwta boot meso USB an nai tote den tha exeis kanena apolitos provlima

Link to comment
Share on other sites

Katevase ta windows ama den ta exeis se arxio image kai meta katevase to programma ton windows pou legete nomizo win to usb pernaei apeutheias to arxio image mesa sto flashaki kai to kanei bootable des ama ta Bios ipostirizoune prwta boot meso USB an nai tote den tha exeis kanena apolitos provlima

Βρε, ξέρω πως να bootarw από το Flashaki, αλλά μάλλον σε μπέρδεψα..

Θέλω να το κάνω κανονικά μέσω CD αν γίνεται, αλλιώς η άλλη επιλογή θα είναι το flash.

|

Αν πάρω άδειο CD, και περάσω μέσα τα Win7, μόλις μπω από Boot, θα αναγνωρίσει το PC τον δίσκο μόλις τον βάλω μέσα?

ή επειδή δεν είναι το γνήσιο CD, δε θα με αφήσει?

Link to comment
Share on other sites

Βρε, ξέρω πως να bootarw από το Flashaki, αλλά μάλλον σε μπέρδεψα..

Θέλω να το κάνω κανονικά μέσω CD αν γίνεται, αλλιώς η άλλη επιλογή θα είναι το flash.

|

Αν πάρω άδειο CD, και περάσω μέσα τα Win7, μόλις μπω από Boot, θα αναγνωρίσει το PC τον δίσκο μόλις τον βάλω μέσα?

ή επειδή δεν είναι το γνήσιο CD, δε θα με αφήσει?

safos kai ginete etsi to ekana mexri kapia xronia arkei to CD pou tha antigrapseis na ine Bootable 

Link to comment
Share on other sites

Όποιο τρόπο και αν διαλέξεις, το ίδιο θα κάνεις. Εκτός και αν η μονάδα, είναι παλιά και δεν αναγνωρίζει το flashάκι για τον οποιοδήποτε λόγο.

Εάν googlάρεις για Windows 7, θα βρεις αρκετά πράγματα. Κυρίως σε iso μορφή. Από εκεί και πέρα τα κάνεις burn στο CD. Και vu a la. Πηγαίνες στο BIOS αλλάζεις το priority και κάνεις την εγκατάσταση από εκεί.

 

Εφόσον γίνει αυτή λοιπόν, και αφού εγκαταστήσεις στο υλικό, όταν θα σε βγάλει στην επιφάνεια εργασίες, και θα βλέπεις διάφορα για ενημερώσεις, και λοιπά ανάλογα τις ρυθμίσεις που έχεις κάνει εσύ στην εγκατάσταση,

θα σου έρθει και ένα μήνυμα ότι τα windows θα είναι για 30 μέρες δωρεάν μέχρι να τα ενεργοποιήσεις.

 

Το όλο θέμα έγκειται, στο να βρεις ένα καλό iso αρχείο με τα windows, ένα πρόγραμμα που θα κάνει το CD bootable σε τέτοια μορφή που το διαβάζει ο υπολογιστής και έναν activator. Εάν εξακολουθείς να 'χεις κάποιο θεματάκι, θα κάνω εγώ ένα ψαχτίρι μιας και τον τελευταίο καιρό που χρειάστηκε να περνάω λογισμικά και να φτιάχνω υπολογιστές σε φίλους και γνωστούς, έπρεπε να το ψάξω.

Link to comment
Share on other sites

yy auto to programma ellaga

Baggos katevase ama ine to Torrent pou s edwsa pou sto katevazei apeuthias se ISO kai meta i to Vazeis se ena CD me UltraISO kai to kaneis eggrafi san bootable disk

I vazeis to programma auto se USB kai telioneis !!!!

Link to comment
Share on other sites

noobs 

 

Κατέβασμα Windows 7 Δωρεάν και Νόμιμα από τη Microsoft!

 

http://www.pcsteps.gr/1545-%CE%BA%CE%B1%CF%84%CE%AD%CE%B2%CE%B1%CF%83%CE%BC%CE%B1-windows-7-%CE%B4%CF%89%CF%81%CE%B5%CE%AC%CE%BD-microsoft/

Link to comment
Share on other sites

noobs 

 

Κατέβασμα Windows 7 Δωρεάν και Νόμιμα από τη Microsoft!

 

http://www.pcsteps.gr/1545-%CE%BA%CE%B1%CF%84%CE%AD%CE%B2%CE%B1%CF%83%CE%BC%CE%B1-windows-7-%CE%B4%CF%89%CF%81%CE%B5%CE%AC%CE%BD-microsoft/

Ti Fash??

Den to iksera auto...dld ti katevazeis trial ta windows kai meta apla vazeis to crack kai ise ok?

 

P.S

Τα παρακάτω ISO ΔΕΝ περιλαμβάνουν product key ή κάποιο σπαστήρι.

Απευθύνονται σε ανθρώπους που έχουν ήδη έναν κωδικό των Windows και χρειάζονται το DVD των Windows 7 για format και επανεγκατάσταση

Edited by Dante44®
Link to comment
Share on other sites

Από κλειδιά παίδες έχω για ότι διαλέξω από Windows. :P

Ωραία, θα περάσω τα Win7 σε CD. (μορδή iso).

 

Ευχαριστώ για τις απαντήσεις σαςςςς.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Posts

    • Thank you 😊👍 working great! 
    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...