Jump to content

[Trick]Get Castle easy and legally


Recommended Posts

Before I start, i did searched for this one but i didn't found it anywhere!And i'm sorry if the most of you already know it!

 

Ok...

1.We have a clan and we have a castle siege!

2.We organise a party with the clan's leader and 4-5 Dominators!

3.All the dominators have their bar emty and they put ONLY "Flame of Invicibility" on F1.

4.Now we move the party somewhere nearby the castle and when there are 5 minutes remain on siege, the party moves into the castle!(Dont be too close with the castle or you will get teleported back in town if the castle change owner!)

5.5 minuts remain and we are moving in!The leader runs and starts the pray, exactly when the pray starts, the first dominator activates "Flame of Invicibility". (Now the pray can NOT be canceled in any way!)

6.When the "Flame of Invicibility" is ready to time out (1 second) the next dominator activates his "Flame of Invicibility".

7.You repeat the 6th step till the pray ends and you are the owner of the castle!

 

Notes.

1.NEVER use the "Flame of Invicibility" before the already active one is completely finished!It wont work!

2.There will be no time for the next attackers to attack you so you wont need to defence!

Link to comment
Share on other sites

in java they cant interupt ur cast when invincibility of flame is on?

This is nothing to do with java!

Flame of Invicibility is just a skill a buff actually!

When you use it, no one can hurt you in any way!Got it?

Link to comment
Share on other sites

This is nothing to do with java!

Flame of Invicibility is just a skill a buff actually!

When you use it, no one can hurt you in any way!Got it?

thnx, now i can make my ol clan :D and rool over the world!
Link to comment
Share on other sites

5 min before end - in the first the former owner will be shocked because their time run out to do something against it.

on the siege 14 days later they will check how you do - and than it takes 1 or 2 sieges more before they find out how to interuppt you :D

or longer this is regarded of the Intelligence  ;D

Link to comment
Share on other sites

Damn, non of u cunts can speak any english :)

 

Well, this wont work if ur playing against a 'good' guild (Not a polak zerg).

 

And some questions, WHY IN HELL, would they just let your party walk inside the praying room?!

like seriously, WHY WOULD THEY?

damn i hate these retarded fucking polaks thinking that this actually works, DAMN!

 

Just lock this fucking thread.

Link to comment
Share on other sites

Before I start, i did searched for this one but i didn't found it anywhere!And i'm sorry if the most of you already know it!

 

Ok...

1.We have a clan and we have a castle siege!

2.We organise a party with the clan's leader and 4-5 Dominators!

3.All the dominators have their bar emty and they put ONLY "Flame of Invicibility" on F1.

4.Now we move the party somewhere nearby the castle and when there are 5 minutes remain on siege, the party moves into the castle!(Dont be too close with the castle or you will get teleported back in town if the castle change owner!)

5.5 minuts remain and we are moving in!The leader runs and starts the pray, exactly when the pray starts, the first dominator activates "Flame of Invicibility". (Now the pray can NOT be canceled in any way!)

6.When the "Flame of Invicibility" is ready to time out (1 second) the next dominator activates his "Flame of Invicibility".

7.You repeat the 6th step till the pray ends and you are the owner of the castle!

 

Notes.

1.NEVER use the "Flame of Invicibility" before the already active one is completely finished!It wont work!

2.There will be no time for the next attackers to attack you so you wont need to defence!

 

if leader die ? :S

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Posts

    • Thank you 😊👍 working great! 
    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...