Jump to content

[HELP]Choke.


ShuN^

Recommended Posts

    * Causes of Choke (Inconsistency in settings)

      Frame-rate (Fps_max)

      Tic-rate (Cl_updaterate, cl_cmdrate)

      Bandwidth transfer speed (Rate)

      ISP data loss

 

Keep in mind that you cannot get more updates than whatever the server Tic-rate is set at.

 

If your settings are too high or too low (aren’t at the optimal value), you will get choke.

 

Using net_graph3

 

Valve still makes use of a command created by id-software back in the days of Quake, good ol’ “net_graph 3″. This command is important because it shows you a very detailed readout of all network activity to and from the game-server you’re playing on.

 

Un-optimized Net_graph 3 (on a 66 tic server)

 

Also

 

net_graph 3

 

Optimized Net_graph 3 (on a 100 tic server)

 

net_graph 3

 

You’ll notice in the above, “un-optimized” picture, that i have 13 choke, exactly the amount of data being lost due to a too low rate. You can use the right-hand values 57.4/s, 67.1/s to determine if you are communicating with the server optimally based on the server’s tic-rate.

 

Tips to reduce choke

 

The key to optimizing your settings are to match them with the server’s Tic-rate but add 1.

 

If you do not know of the Tic-rate of the server you are connected to you can type:

 

sv_maxupdaterate

 

    * So on a 100 Tic-server, your settings should be:

      cl_updaterate 101

      cl_cmdrate 101

      fps_max 101 (i use 121)

      rate 30000 (to determine max-rate for a given server, at the console type sv_maxrate)

 

Note: Do not allow your FPS to dip significantly below the server Tic-rate (fps_max 101 for 100 Tic server), or you will also receive choke.

 

Also, many servers will set your network settings automatically, quite often to less than optimal values! Make sure you check your network settings upon joining any server!

 

Things we cannot control

 

The more people connected to a server, the less resources the server will have to send data. Unfortunately this will vary depending on in-game activity. For example, If a server is running at 100 Tic-rate and has 32 players, it will need approximately 3,200 updates per second to maintain consistency with it’s clients. Obviously today anything much higher than this is simply not feasible without producing lag.

 

The largest smooth-game you can really get at the moment are 20 man servers at 100 Tic-Rate that are FPS-Boosted to 2000 server side fps (which is the max server fps available). Anything higher than that just demands too much on today’s hardware/bandwidth limitations and you will get choke.

 

Also, your Internet Service Provider may be causing Packet Loss (:”loss” above in net_graph 3). If that is the case it may be because of too many server hops. As i mentioned in another article, Gamerail offers a service to help resolve this problem if switching ISP’s is not an option.

Link to comment
Share on other sites

Well,about the 'tic of the server',it has 18 slots.I don't know how much is it on tic  :D

I use these commands you told me but i still get 2-7 choke. :/

 

Hmm check rate,ex_interp

 

rate 25000

ex_interp 0.01

 

If those settings dont work also,i think is because from the server where you play.

Try to play in another server and tell me if is the same.

Also probably you have choke because your network broadband is to small.

Link to comment
Share on other sites

I think it's my internet's problem cuz i used the commands you gave me and i was still getting choke about 25-30.

Anyway,thx for your help.

Lock it :)

 

Well but i see an improvement you said is 25-30

After mine settings you get betwen 2 and 7 so it's better.

 

me but i still get 2-7 choke. :/

 

Anyway change your network and i dont think you will have anymore problems.

Or check you pc mby is smthing wrong with him.

Locked.

 

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.


  • Posts

    • Yes, it is, it's not hard to do (if you know what you're doing); just time consuming.   To make some things clear: 1. You can not create .ukx files with animated skeletalmeshes inside, by using any of the freeshared L2Editors (basically, no support for .psa files) 2. You need a patched UT2003/UT2004. You can either get your own ut2004 and download Gildor's patch from his web, or use any of these: When you use these, you should be able to import both .psk and .psa animations > link the skeletalmesh to the psa > save as .ukx > use ut2down to convert the file to l2 format > encrypt the .ukx with standard l2 encryption (you can use mxc encdec, you can find it in the folder of the l2editor i shared). Your best bet is to use pawnviewer (aka dev mode) to test that. If you have troubles with that process then leave a reply here, otherwise, if it works correctly, you can move on to adding missing animnotify classes to you unrealed, then proper animnotifies, sounds, effects or w/e is missing from your .ukx files. Keep in mind that this is overall not difficult but a huge amount of work (unless you're good at scripting/macros) since you'd need to manually re-create every single animnotify, by hand. If you have doubts or i wasn't clear enough let me know here. (in case you don't know what an animnotify is: UDN - Two - AnimNotifies (unrealengine.com) )  
    • Welcome to JewStor Service!!!   ❖Ready-made verified wallets, exchanges, business banks and to order accounts. ❖EU/UK/US/DE Stuff: 100% Verified! Reliable financial tools for your business. ❖Popular items available include: Stripe business + Payoneer, Deutshce Bank, BBVA ES, Xapo Bank, Revolut business / personal, Santander Bank, Wallester business, Bitsa EU, Binance EU, Qonto Business, Blackcatcard EU, Shopify Payments, ICard EU, N26 EU, Naga Pay EU, Paysera EU, Mistertango Business and many others.
    • Custom = everything that is not part of my H5 client, such as Aegis skin, Death Knight skin, Constructor skin, Golden Valakas skin, an example is the pack containing 3 Golden Valakas skins+cloaks, to give you an idea, this pack consumes almost 200MB within the system, another example of custom is the Hunter Head set made by Asuki, almost 100MB within the system, every custom item added to the client, specifically within the system folder will increase the consumption of your client's virtual ram memory, the more custom added there, the faster your client will close due to critical. Around 4 to 5 custom packs that I removed from the system and made my client reach the ram virtual limit only after more than 40 hours online, in other words; It is only worth adding custom items to the system folder if it is very well compressed, maximum up to 10MB per custom pack (This pack below in the photo, only it inside your client - system consumes almost 200MB, when I removed this pack inside the system it increased the game's lifespan by almost 4h during my tests)
    • ready pack for sale with lucera files made from scratch price is 350 euros without the license the server is x30 rate the server is there to see everything test ie.. there have been several changes everything works there will be support for everything for as long as possible please, can you send me a message here, there is complete transparency in everything
    • The author has been using an alternate account under the name @project166 to promote their services, which violates our RULES. Additionally, the author does not adhere to our guidelines regarding the inclusion of pricing information.     Topic Locked.
  • Topics

×
×
  • Create New...