Jump to content
  • 0

About IP's in login/server properties.


Question

15 answers to this question

Recommended Posts

  • 0
Posted

Well... it still doesnt wanna go through the login screen. i guess i need to modify some more IP's... If  anyone can be a bit more specific it could help.

 

If you stuck at the part where is says the server's status and the server's name and your ping is 9999 change your max and min protocol revision from your server.properties file to 1 and 999 { min and max } .

  • 0
Posted

nope.. i dont stuck there... it just doesnt go through the login at all

 

Can you paste the content of your 2 config files ? { gameserver.properties , loginserver.properties }

 

Also , don't forget to edit the l2.ini

 

ServerAddr must be 127.0.0.1 in your system and in players system the serveraddr must be filled in with your ip address.

  • 0
Posted

Well finally after all i think i managed to get the right IP's. My friend can go through the logic window succesfully but he cant get through the Server window. Any ideas ?

  • 0
Posted

Well finally after all i think i managed to get the right IP's. My friend can go through the logic window succesfully but he cant get through the Server window. Any ideas ?

 

Gameserver/config/server.properties

 


MinProtocolRevision = 1

MaxProtocolRevision = 999

  • 0
Posted

I also tried changing the RequestServerID. It was 1 And the server i launched is named Sieghardt So i guess the RequestServerID should be RequestServerID = 2. I tried with 2 but still nothing.

  • 0
Posted

HERE IS THE GAMESERVER PROPERTIES:

 

 

 

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

ExternalHostname = 91.132.98.167

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = *

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1

 

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

 

# Default: *

GameserverHostname = 127.0.0.1

 

# Default: 7777

GameserverPort = 7777

 

 

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password = root

 

# Default: 100

MaximumDbConnections = 100

 

# Default: 0

MaximumDbIdleTime = 0

 

# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1

 

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = True

 

# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack

 

# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100

 

# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# Default: 83

MinProtocolRevision = 1

 

# Default: 87

MaxProtocolRevision = 999

 

 

# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------

 

# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*

 

# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*

 

# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

  • 0
Posted

AND THIS IS THE LOGIN :

 

 

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 91.132.98.167

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 127.0.0.1

 

# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname =

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

 

  • 0
Posted

Gameserver.properties

 


InternalHostname = 127.0.0.1

 


GameserverHostname = * ( don't use 127.0.0.1 because you will be the only one who can login into the server )

Guest
This topic is now closed to further replies.
  • Posts

    • Hi everyone, Since I’m no longer interested in L2 servers, if anyone is willing to continue the project, let me know. I’m currently selling the entire project. DM me for more information if you’re genuinely interested. I can offer limited free support for the first couple of months. It is not cheap. The sale includes the domain, the recently fully redesigned website, the updater, the interface, server files with Lucera ext source, and the database (excluding account passwords, emails, and other private information; character data can remain).   Server for test: https://lineage2.gold/download Server Info: https://lineage2.gold/info Over 110 videos YouTube playlist: https://www.youtube.com/watch?v=HO7BZaxUv2U&list=PLD9WZ0Nj-zstZaYeWxAxTKbX7ia2M_DUu&index=113  
    • You invent yourself a life - bad for you, one of the inner core dev, fernandopm, which worked hard over aCis quests from 2011 to 2016 is argentinian. I teached him back in time to work and make proper quests. My dev team comes from 10+ countries and I'm myself french. "Racist/nationalist" card ? Not working bro.   Not sure why I should thank you to send me questions, and regarding bug reports, so far, I got none of yours in either discord, gitlab, or forums. I'm sorry if you feel "ignored", but that's more a psychanalyst you need to speak with if you put emotions towards someones' appreciation over a forum. I never ignore a bug report, and if so (like skills reports), it's because I got a bigger plan (skills refactor, in that case). In any case, I delivered cookies for the bug report/fix, even if it dated of months, with proper credits over changesets. "Victim card" ? Not really working, but ok, maybe you're "emotional".   I barely make money out of aCis, for the spent time - simply selling my services, or even coding/administrating a minecraft/L2J server would make far more money. Breaking intentionally things would be stupid. If you don't understand I'm not the only one working on that pack, I can't help you. Also, the scale of edits is sometimes extreme - AI L2OFF ? 1800 files added. How do you want everything works in a single shot ? "Exploiting noobz for money" card ? Still not working, or I'm a terrible businessman.   Meanwhile - you shadow advertise your project, L2JOne (since 2017 btw) - you should maybe start by the beginning saying you're a competitor and aCis is actually a spike in your foot. That also explains why you act like that. RusAcis got the exact same strategy, speaking bad of me, saying they got unique fixes (you speak about I break things, they break and recode things 4 times sometimes, btw), but successfully reselling latest revision with poorly executed stuff. "aCis is good, Tryskell is ok, but I solve all issues in extreme low time so I can piss over him" card ? Mmmmhhhh.   Our conversation ends here if you want, I don't force ppl to speak with me if they don't want - hopefully, people would understand I'm not the arrogant one and the one who doesn't want to talk, or even collaborate. :). I understand you got your own project and got no will to improve aCis.   NOTE : I'm extremely happy for your call of ExShowServerPrimitive with getValidGeoLocation, extremely impressive. Arrogant, no. Sarcastic ? Maybe.   Good night everyone.
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock