[Guide] How to Create LII CT1 Server(Kamael)

[fdLP.]

Download that system   http://rapidshare.com/files/91823987/system.rar  , patched for kamael edit the l2.ini and execute loaderct1.exe .

[panos_tech]

Ty for the pack m8 i managed to get tha client working but it doesn't connect to the server it stucks at the "connecting to server please wait a momment" message.

 

Am i doing something wrong?

 

Iam trying to login to the server from the same pc the client is installed to...

 

Can you tell me what setting to use at loginserver->properties.file and gameserver->properties.file and client .ini?

 

Iam "behind" a proxy but i just want the server to use it over lan network....

 

My pc ip adress is 10.143.12.67...

 

Thanx again for the help vary much...

[fdLP.]

First of alll have you opened the ports? for LineageII 2106/7777/9014 TCP/UDP !! then put the LAN IP start>rune>cmd>ipconfig as InternalIP and www.whatismyip.com as External !! then edit l2.ini with WAN IP!

[panos_tech]

I believe that these ports are open...how do i check-edit them?

[fdLP.]

Go at start>run>cmd>ipconfig and take the 3rd IP and write it on explorer .. write pass and username and go somewhere that will say Virtual Server , NAT , NAPT or Port Forwarding ...

[panos_tech]

Windows IP Configuration

 

 

Ethernet adapter Local Area Connection:

 

        Connection-specific DNS Suffix  . :

        IP Address. . . . . . . . . . . . : 10.143.12.67

        Subnet Mask . . . . . . . . . . . : 255.255.255.224

        Default Gateway . . . . . . . . . : 10.143.12.65

 

PPP adapter pwn:

 

        Connection-specific DNS Suffix  . :

        IP Address. . . . . . . . . . . . : 192.168.99.2

        Subnet Mask . . . . . . . . . . . : 255.255.255.255

        Default Gateway . . . . . . . . . : 192.168.99.2

 

these are the results from ipconfig ...the only ip that i put and has a result is the .65 and it takes me to this url

http://10.143.12.65/apache2-default/ and in the page is a message that sais "It Works!"

 

The other ips won't budge on I.E.

 

I forgot to tell you that my lan is behind routerpc-linux running cause i have wireless connection with the proxy...

[fdLP.]

yes with the .65 you will go to your router and open the ports ... after that i dont know ... and we cant get to the site .. try to put that IP as internal and www.whatismyip.com as external or 127.0.0.1 as internal ...

[Adorable]

full cool it works fine at me :P ty for share

[Adorable]

damn...some probs now with this

[ALEX2008GR]

err Adorable don't double post if you need something just edit your 1st post

[bourbouli8ras]

very good guide man, i love you:)

[panos_tech]

Ok so far so good...

 

But when i launch tha clent and write ID and PASS it pops up a message that say:

"A hacking tool has been discovered,try clossing some programs and try again"

 

Why do i get that?My server and client are on the same pc and im running the server as a lan server for reminding..

 

Ty for helping...

[fdLP.]

open your hosts and put this and you will be ok

 

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host

127.0.0.1 localhost

127.0.0.1 l2authd.lineage2.com
127.0.0.1 l2testauthd.lineage2.com 
216.107.250.194 nprotect.lineage2.com

[panos_tech]

Thank you very much....its up and running....but the specified ID:(Maker) and Pass:(admin) don't have gm privileges.

 

I ran tha account manager an gave 200 access level to another account of mine and the same thing happens...when i try to give a command nothing happens...

 

Why is that?

[fdLP.]

open navicat > go characters > find your char > then find Access level from 0 put it at 200 and log in with the char u changed the access level and u will be admin !