[Guide] Setting up your L2Walker!!!

[MasterWalker]

What will it log with L2Walker, not knowing how to configure it so that you can farm?

 

This is a very simple guide, teaching you set up your character, be it fighter or mage for it to work ingame.

 

Sorry for my english :(

 

The process is the same for both L2Walkers as OGG L2Walker IG, what changes is that in the screen version of GI to get the combat is different, the end of the tutorial I will show the screen to start the combat in L2Walker IG.

 

I will describe only the settings to upload, I will not comment on all functions.

 

ATTENTION: I will pass SETTINGS WHICH ARE FOR FIGHTERS AND MAGES.

 

To begin, open your L2Walker and go to the Setup Tab> Options and click on Options Heal, here we configure the options for your bot use the HP potions automatically.

 

In HP | MP Protect you must select whether it will use potions, those conventional, or if it will use Elixir of Life. In the picture below you can see areas circled in red, just select the HP potion that will be used and the delay that it varies from server to server, do not forget to mark the squares.

 

 

Now click on Menu Buffs, the Buffs here will set your bot will use while it is uploading. In the picture below you can see the area circled in red, please describe the skills that will be used by the BOT, and mark the comics In Auto Detect and Fight.

 

 

Now click on Menu Combat Heal, here we will configure the use of soulshots and some skills that can be used during combat.

 

In the picture below you can see areas circled in red; Use Shot of the options, just as you leave all marked as shown in the image, and select the combobox grid soulshots your BOT will use; below select Open Skill Fight atack of the skills you want him to use while leveling, no need to mess around with MP options.

 

 

Now click the Settings Menu Party, here we set up so that your BOT send, receive, protect, or follow the Party automatically.

 

In the image below the major air this menu, are circled in red; in Healer Setting, you can add the name of any char that you want your bot automatically send Party; Follow on Settings you can mark the option for Active Follow your BOT follow continuously a Char or BOT (This function is RECOMMENDED CASE IS OPENED WITH 2 BOTS, AND THEY ARE IN PARTY Leveling) you can also indicate the range (distance) between the two, in Follow Distance; Auto Accept Invites Names, you can put the nicknames of the characters that you want the BOT party accepted automatically. Follow the option Atack, you can put the nick of chars that you want the BOT to protect, just put the nicknames in Protect Member, always checking the boxes of the options.

 

 

Now click on Party Buffs, the Buffs will set up here that you can use your BOT in some Char Party that is in him.

 

In the picture below you can see the area circled in red, select Range in the distance the char to the BOT is to receive the Buff, i used to make 200, which is neither too close nor too far; below select the Skills that the BOT will use at some mebro the Party, the delay that you choose, i used to leave 2 minutes, or if I get buff now only two minutes from now I will receive you again, just put in Name names Characters who may receive the Buffs in the Party, always separates the names with ( ; ) .

 

 

Now click Heal Party, here we configure the options in case you're using a Bishop in the Party.

 

In the picture you can see the options in Protect Party, the range (distance), I leave custum 200; below simply select the skills to heal you that the Party Bishop use in and check the option for In Fight; Names in just designate the name of Char (s) q is in the Party, for which he receives the healing of HP, the Auto Res mark just the options Auto Res Pary Player and Allow Use Item, and further down to put the names of who you want that the BOT gives Resurrection Automatically.

 

 

Now click on Menu Pathing, here we set the size of the area in which the BOT will upload.

 

In the picture below you can see areas circled in red by default sizes of the area is 1500x1500, you simply change these values to have an area smaller or larger.

 

 

Now click on Menu Policy: here we set the distance that the BOT can attack the mobs, and the skills he used while up.

 

In the picture below you can see the Use Far Setting checked, and the distance set in 9999; below Equip WEAP have the option, simply select the two combobox the weapon you're using, and down to select the skills you want to atack that the BOT use while uploading, remember that the skills will be used only with Equips you selected in WEAP Equip; below in Attack Type, Direct Attack just leave if your bot is Fighter, if he's Magician settings change, and below you can see how to configure your mage lvl up on L2Walker.

 

 

Configuration Wizards for attacks:

 

To configure the atacks your mage to level the L2Walker, just follow the steps below:

 

With L2Walker IG open, just select the Policy, then click on the tab Far atacks, and will open a screen like the image below:

 

Far Atack:

 

 

Nesa screen select the option Use Far Setting, and put the value 9999; below in WEAP Equip put the weapon or part of the set that your character is using, because it will only use the skills set, whether if it is equipped with the item you selected; in Skill 1 Skill 2 Skill 3 Skill 4 and 5 skill you simply select the skills that your magician will use in long-range attacks, did the settings with a spellsinger, Repeat scored in four of them, that once the skill load the char to use it again, since the Surrender To Water, Repeat not scored because if not he will use it directly; in Atacking Type Use spell check and select the skills you want.

 

Now click on the tab, Short Atack soon will open a screen like the image below:

 

Short Attack:

 

 

On Equip WEAP put the weapon or part of the set that your character is using, because it will only use the skills set, whether if it is equipped with the item you selected, in Skill 1 Skill 2 Skill 3 Skill 4 and Skill 5 you simply select the skills that your magician will use short range attacks, if selected the Solar Flare of spellsinger Repeat and marked, so that it uses the skill continuously, in Atacking Type Use spell check and select the Skills that you want.

 

Do not forget to go to the option Combat Heal, and put to use your char Blesseds Spiritshots.

 

To avoid losing your settings, go to SETUP> Options click Save Options.

 

This first part is ready, now we will learn to use Potions or Mana Elixir of Mental Strength and put the BOT to begin upload.

 

In the picture below you can see the Script tab, where we select for your Mana BOT automatically use, just select the Mana Potion and click on RUN.

 

 

Start Combat L2Walker OGG (Outgames):

 

In this next image you can see the parts circled in red, to see the map, just click on the tab and then click Virtual Map in Real Map, to start the Combat, click Begin Combat; Ready your Bot is already uploading.

 

 

Start the Combat L2Walker IG (INGAME):

 

Just click on the Menu Other Ctrl, and select the option Selected Auto Attack and click StarCombat. (End).

 

 

I hope this guide is useful.

 

Credits: MasterWalker  :D

 

[kagkouras]

greta guide

[arkanoid]

thx for share man, can u explain the other options in pathing section?

[maxXxic]

thanks.... but this is not working for me.... a click on .START Combat and dont work

[MasterWalker]

thanks.... but this is not working for me.... a click on .START Combat and dont work

 

Already checked the L2Walker is authenticated?

[SoRa]

Great guide mate,keep it up,and sharing! :)

[Toska]

Very good guide , thank you.

[PwNNNz0r.^]

Nice guide, easy and useful. Thx and keep it up.

[4ek]

sry, but bad settings, unpro ^^

[TaHoC]

What about "sleep point"?

[nikthegreek]

nice guide for all and for all new botters

[SensationWhite]

nice guide,but u didnt said how to make the program work on a server,i know u have to fix some ips and i dont know what.....

i`m a newbie on walker

[L][Master65]

where do i install l2walker at? cuz i got one for a gracia part 2 server..

i am new to botting plzz help me ^^

[fuzileiro]

now look like so easy!!

thx dude!