Jump to content

Recommended Posts

Posted

:o[Guide]How to make a Monster Pet :o

 

 

Hi in this guide I will show you how you can get a monster like Valakas and make him pet that summoning with skill like Kat the cat. Please to success follow my steps directly:

 

1) Open Navicat and go to table 'npc', there find a monster that you like and take his all stats and write them on a paper

 

2) Now go to the last table and make new npc (press the +)

 

3) After that put all Valakas stats but change his type to L2Pet and his ID that not exist(if you want change you can change the stats like you want)

 

4) When you finish that go here

C:\Server\gameserver\data\stats\skills (in my case) and open the file 1100-1199.xml and open it with notepad

 

5)Now go to the bottom and copy and paste that (if you want Valakas):

 

 

<skill id="1192 <--- This will be the skill that you call valakas" levels="1" name="Summon Valakas">

<table name="#mpConsume_Init"> 8 </table>

<table name="#mpConsume"> 31 </table>

<table name="#reuseDelay"> 21600000 </table>

<table name="#itemConsumeCount"> 3 </table>

<table name="#itemConsumeCountOT"> 0 </table>

<set name="itemConsumeId" val="1458"/>

<set name="itemConsumeCount" val="#itemConsumeCount"/>

<set name="itemConsumeIdOT" val="1458"/>

<set name="itemConsumeCountOT" val="#itemConsumeCountOT"/>

<set name="itemConsumeTime" val="240000" />

<set name="mpInitialConsume" val="#mpConsume_Init"/>

<set name="mpConsume" val="#mpConsume"/>

<set name="power" val="0.0"/>

<set name="target" val="TARGET_SELF"/>

<set name="hitTime" val="15000"/>

<set name="reuseDelay" val="#reuseDelay"/>

<set name="skillTime" val="15000"/>

<set name="skillType" val="SUMMON"/>

<set name="isMagic" val="true"/>

<set name="operateType" val="OP_ACTIVE"/>

<set name="castRange" val="-1"/>

<set name="effectRange" val="-1"/>

<!-- Summon-specific -->

<table name="#npcIds"> P u t y o u r I D </table>

<set name="npcId" val="#npcIds" />

<set name="expPenalty" val="0.3" />

<set name="isCubic" val="false" />

<for>

</for>

</skill>

This must be above the line </list>

 

6) When you finish that go to your server and add skill ID: 1192 LvL: 1 at then use the skill and it will call valakas

 

Attention :A problem that all have is that the attack icon not exists so you must first summon an official monster like kat the cat and get his attack icon on the shortcuts of the bottom of your screen now when you summon valakas you will use the botton that you put in shorcuts and it will attack.

 

<skill id="1192 <--- This will be the skill that you call valakas" levels="1" name="Summon Valakas">
<table name="#mpConsume_Init"> 8 </table>
<table name="#mpConsume"> 31 </table>
<table name="#reuseDelay"> 21600000 </table>
<table name="#itemConsumeCount"> 3 </table>
<table name="#itemConsumeCountOT"> 0 </table>
<set name="itemConsumeId" val="1458"/>
<set name="itemConsumeCount" val="#itemConsumeCount"/>
<set name="itemConsumeIdOT" val="1458"/>
<set name="itemConsumeCountOT" val="#itemConsumeCountOT"/>
<set name="itemConsumeTime" val="240000" />
<set name="mpInitialConsume" val="#mpConsume_Init"/>
<set name="mpConsume" val="#mpConsume"/>
<set name="power" val="0.0"/>
<set name="target" val="TARGET_SELF"/>
<set name="hitTime" val="15000"/>
<set name="reuseDelay" val="#reuseDelay"/>
<set name="skillTime" val="15000"/>
<set name="skillType" val="SUMMON"/>
<set name="isMagic" val="true"/>
<set name="operateType" val="OP_ACTIVE"/>
<set name="castRange" val="-1"/>
<set name="effectRange" val="-1"/>
<!-- Summon-specific -->
<table name="#npcIds"> P u t y o u r I D </table>
<set name="npcId" val="#npcIds" />
<set name="expPenalty" val="0.3" />
<set name="isCubic" val="false" />
<for>
</for>
</skill>

 

P.S. Did you like it??? ;D

 

Special Thanks to : h3Xx and Tiny. ::)

 

Posted

For the attack button that is missing you can also make a macro :P /petattack

Thx for the guide!

 

One question....can u add to the summon skills to use like stun?

Posted

But that's only client sided, uh? So what's the point I don't understand the whole story, plz sb explain the purpose of it.:P

Posted

But that's only client sided, uh? So what's the point I don't understand the whole story, plz sb explain the purpose of it.:P

 

"4) When you finish that go here

C:\Server\gameserver\data\stats\skills (in my case) and open the file 1100-1199.xml and open it with notepad"

 

For you thaT is client sided Files ? pff. lol

 

 

Posted

But that's only client sided, uh? So what's the point I don't understand the whole story, plz sb explain the purpose of it.:P

 

"4) When you finish that go here

C:\Server\gameserver\data\stats\skills (in my case) and open the file 1100-1199.xml and open it with notepad"

 

For you thaT is client sided Files ? pff. lol

 

 

 

 

 

 

 

SORRY, but I thought this is a client mod. Wtf it says [Lineage II client mods]. Don't be such a jerk and say pff&lol

 

 

 

never mind, i think I got the point. You summon a pet and it looks like valakas? I'not sure, plz correct me

  if  wrong

        post new reply

  end if

  : P

Posted

Yes, In simple Words, With the skill : Summon Kai the cat....You will summon Valakas/Baium/Antharas...or whatever you want...and this is a client & server side Modification ;D :P

  • 2 months later...
Guest
This topic is now closed to further replies.


  • Posts

    • https://prnt.sc/Bkkc0ShGXv9m https://prnt.sc/-JFLvZXsn27A
    • Hello guys want to sell adena in L2 Reborn Signature x1  Stock =14kk good price 
    • Hi guys, I have the following problem, I want to set up two servers on the same dedicated server and I can't.   L2jacis 409 Linux Server. The first gameserver has the following configuration: # ================================================================ # Gameserver setting # ================================================================ # This is transmitted to the clients, so it has to be an IP or resolvable hostname. If this ip is resolvable by Login just leave * Hostname = 190.25.103.103 # Bind ip of the gameserver, use * to bind on all available IPs. GameserverHostname = * GameserverPort = 7777 # The Loginserver host and port. LoginHost = 127.0.0.1 LoginPort = 9014 # This is the server id that the gameserver will request. RequestServerID = 1 # If set to true, the login will give an other id to the server (if the requested id is already reserved). AcceptAlternateID = True UseBlowfishCipher = True # ================================================================ # Database informations # ================================================================ URL = jdbc:mariadb://localhost/server1 Login = server1 Password = server1 I configured the second gameserver like this:   # ================================================================ # Gameserver setting # ================================================================ # This is transmitted to the clients, so it has to be an IP or resolvable hostname. If this ip is resolvable by Login just leave * Hostname = 0.0.0.0 # Bind ip of the gameserver, use * to bind on all available IPs. GameserverHostname = * GameserverPort = 7788 # The Loginserver host and port. LoginHost = 127.0.0.1 LoginPort = 9014 # This is the server id that the gameserver will request. RequestServerID = 2 # If set to true, the login will give an other id to the server (if the requested id is already reserved). AcceptAlternateID = True UseBlowfishCipher = True # ================================================================ # Database informations # ================================================================ URL = jdbc:mariadb://localhost/server2 Login = server2 Password = server2 apart from having tested 0.0.0.0 on the second gameserver I also tried 127.0.0.1 In both cases I see the two servers in the login when I log in, but I try to enter the one with the lowest ping and it kicks me out. The other server always appears with ping 9999 and I try to enter but it doesn't do anything and it freezes the login so I have to log in again. The hexids are in their respective folders. For server 1, it has its hexid inside the gameserver config folder, and I checked that the hexid id is the same id, for example id 1 in the gameserver is also id1 for server 1, and hexid 2 has its hexid 2 for server 2. The server ports are open and listening when I turn on both gameservers. I really don't know what could be wrong. If you could give me some help I would appreciate it. Excuse my English.
    • We have both old channels from 2006-2009 with the 3rd verification function enabled, and new ones.   For availability, please contact us below: Link - Telegram Link - Facebook WhatsApp - Click here to go to WhatsApp chat
    • You can contact me on skype: niedziolek50
  • Topics

×
×
  • Create New...