Slasho01 Posted November 21, 2012 Share Posted November 21, 2012 My friends can't connect in my server and I can only connect , using the 127.0.0.1 ip in the l2.ini L2JServer Stable Server version = 5513 Data pack version = 8997 Any solution? excuse my ignorance, but I had already 2 years without touching the lineage 2 and thanks for the help ipconfig.xml <?xml version="1.0" encoding="UTF-8"?> <!-- Externalhost here (Internet IP) or Localhost IP for local test --> <gameserver address="201.xxx.xxx.xxx" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../data/xsd/ipconfig.xsd"> <!-- Localhost here --> <define subnet="127.0.0.0/8" address="127.0.0.1" /> <!-- Internalhosts here (LANs IPs) --> <define subnet="10.0.0.0/8" address="10.0.0.0" /> <define subnet="172.16.0.0/19" address="172.16.0.0" /> <define subnet="192.168.0.0/16" address="192.168.0.100" /> </gameserver> server.properties # --------------------------------------------------------------------------- # Game Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Where's the Login server this gameserver should connect to # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHost = 127.0.0.1 # TCP port the login server listen to for gameserver connection requests # Default: 9014 LoginPort = 9014 # Bind address for gameserver. You should not need to change it in most cases. # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: * (0.0.0.0) GameserverHostname = * # Default: 7777 GameserverPort = 7777 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the appropriate driver and url for the database you're using. # Examples: # Driver = com.mysql.jdbc.Driver (default) # Driver = org.hsqldb.jdbcDriver # Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver Driver = com.mysql.jdbc.Driver # Database URL # URL = jdbc:mysql://localhost/l2jgs (default) # URL = jdbc:hsqldb:hsql://localhost/l2jgs # URL = jdbc:sqlserver://localhost/database = l2jgs/user = sa/password = URL = jdbc:mysql://localhost/l2jgs # Database user info (default is "root" but it's not recommended) Login = root # Database connection password Password = root # Default: 100 MaximumDbConnections = 100 # Default: 0 MaximumDbIdleTime = 0 # --------------------------------------------------------------------------- # Misc Server Settings # --------------------------------------------------------------------------- # This is the server ID that the Game Server will request. # Example: 1 = Bartz # Default: 1 RequestServerID = 1 # True = The Login Server will give an other ID to the server if the requested ID is already reserved. # Default: True AcceptAlternateID = True # Datapack root directory. # Defaults to current directory from which the server is started unless the below line is uncommented. # WARNING: <u><b><font color="red">If the specified path is invalid, it will lead to multiple errors!</font></b></u> #Default: . DatapackRoot = . # Define how many players are allowed to play simultaneously on your server. # Default: 100 MaximumOnlineUsers = 100 # Numbers of protocol revisions that server allows to connect. # Delimiter is ; # WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u> # Default: 267;268;271;273 AllowedProtocolRevisions = 267;268;271;273 # --------------------------------------------------------------------------- # Misc Player Settings # --------------------------------------------------------------------------- # Character name template. # Examples: # CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]* # The above setting will allow names with first capital letter, next three small letters, # and any letter (case insensitive) or number, like OmfgWTF1 # CnameTemplate = [A-Z][a-z]* # The above setting will allow names only of letters with first one capital, like Omfgwtf # Default .* (allows any symbol) CnameTemplate = .* # This setting restricts names players can give to their pets. # See CnameTemplate for details PetNameTemplate = .* # This setting restricts clan/subpledge names players can set. # See CnameTemplate for details ClanNameTemplate = .* # Maximum number of characters per account. # Default: 7 (client limit) CharMaxNumber = 7 loginserver.properties # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: * (0.0.0.0) LoginserverHostname = * # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: * (0.0.0.0) LoginHostname = * # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # Default: True LogLoginController = True # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: False AcceptNewGameServer = False # Flood Protection. All values are in MILISECONDS. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the appropriate driver and url for the database you're using. # Examples: # Driver = com.mysql.jdbc.Driver (default) # Driver = org.hsqldb.jdbcDriver # Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver Driver = com.mysql.jdbc.Driver # Database URL # URL = jdbc:mysql://localhost/l2jls (default) # URL = jdbc:hsqldb:hsql://localhost/l2jls # URL = jdbc:sqlserver://localhost/database = l2jls/user = sa/password = URL = jdbc:mysql://localhost/l2jls # Database user info (default is "root" but it's not recommended) Login = root # Database connection password Password = root # Default: 10 MaximumDbConnections = 10 # Default: 0 MaximumDbIdleTime = 0 # --------------------------------------------------------------------------- # Misc. # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = False # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started unless the below line is uncommented. #DatapackRoot = C:/Work/tmp/DataPack # --------------------------------------------------------------------------- # Developer Settings # --------------------------------------------------------------------------- # Default: False Debug = False # --------------------------------------------------------------------------- # Restart LS every 24 hours? # --------------------------------------------------------------------------- # Default: False, 24 LoginRestartSchedule = False LoginRestartTime = 24 Link to comment Share on other sites More sharing options...
0 claww Posted November 21, 2012 Share Posted November 21, 2012 You have router? did you open the ports? Link to comment Share on other sites More sharing options...
0 GOld3x Posted November 21, 2012 Share Posted November 21, 2012 when you put 127.0.0.1 the only one who can enter is you! You must put your ip cmd/ipconfig or your no-ip then you open ports at your router (7777/2106/9014) Link to comment Share on other sites More sharing options...
0 Slasho01 Posted November 21, 2012 Author Share Posted November 21, 2012 Already reached the problem, thank you very much for your help :D My solution was to edit this in this way <gameserver address="201.xxx.xxx.xxx" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xsi:noNamespaceSchemaLocation="../data/xsd/ipconfig.xsd"> to <gameserver address="201.xxx.xxx.xxx" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xsi:noNamespaceSchemaLocation="ipconfig.xsd"> :D Link to comment Share on other sites More sharing options...
0 Mhoska Posted November 22, 2012 Share Posted November 22, 2012 Problem solved, Topic Locked. Link to comment Share on other sites More sharing options...
Question
Slasho01
My friends can't connect in my server
and I can only connect , using the 127.0.0.1 ip in the l2.ini
L2JServer Stable
Server version = 5513
Data pack version = 8997
Any solution?
excuse my ignorance, but I had already 2 years without touching the lineage 2
and thanks for the help
ipconfig.xml
server.properties
loginserver.properties
Link to comment
Share on other sites
4 answers to this question
Recommended Posts