Jump to content

Recommended Posts

Posted

jbtUF3DCwcreLU.jpg

 

 

 

The maximum areal densities of hard disk drives are expected to more than double by 2016, according to an IHS iSuppli report on the memory and storage market published Monday.

 

This isn't the first such forecast -- hard drive maker Seagate has also predicted a doubling of drive density, for example. IHS iSuppli has just confirmed what the vendor community already knew.

 

IHS iSuppli said the increase in densities should bode well for the continued sales of hard drives for use in systems that support data-intensive applications such as video and audio, the market research firm stated.

 

Technologies that will make it possible to expand disk density include heat-assisted magnetic recording (HAMR), which Seagate patented in 2006. Seagate has already said it will be able to produce a 60TB 3.5-in. hard drive by 2016. Laptop drives could reach 10TB to 20TB in the same time frame, according to IHS iSuppli.

 

The research firm expects areal densities to climb to a maximum 1,800Gbit per square inch per platter by 2016, up from 744 Gbit per square inch in 2011. Areal density equals bit density, or bits of information per inch of a track multiplied by tracks per inch on a drive platter.

 

From 2011 to 2016, the five-year compound annual growth rate for HDD areal densities will be equivalent to 19%, IHS iSuppli wrote in its report.

 

It is estimated that hard drive areal densities will reach 780Gbit per square inch per platter this year, and then rise to 900Gbit per square inch next year.

 

"The rise in areal density will pave the way for continued growth of the [hard disk drive] industry," said Fang Zhang, an IHS storage systems analyst.

 

Zhang noted that despite technical limitations associated with today's leading technology for writing to a drive -- perpendicular magnetic recording (PMR) -- other technologies such as HAMR will continue to increase capacity.

 

Before HAMR technology was developed, the most significant breakthrough in the effort to expand drive density was the creation of PMR technology, which Seagate and Hitachi use in their drives today.

 

PMR technology is expected to allow drive makers to reach the 1TB per square inch milestone in the next few years, but that will also mark the technology's upper limits, Seagate and others have said.

 

"In particular, growth opportunities will lie in applications associated with mass enterprise storage requirements, gaming and digital video recorders, where massive capacity is required to store high-definition video," Zhang said.

 

Seagate began shipping the drive that's the current areal density leader in September 2011. Designed for desktop apps, that drive boasts 4TB of capacity in a 3.5-in form factor. It has five platters with 625Gbit per square inch, or the equivalent to more than 1TB of capacity per platter.

Posted

+ that i dont think anyone will be in need of this.

A friend of mine is a DJ, he has 10TB external hard discs in total and its still not enough for him. Also what about video producers?
Posted

A friend of mine is a DJ, he has 10TB external hard discs in total and its still not enough for him. Also what about video producers?

OR PORN

Posted

why that high? use more than 1 don't need 1 that much... buy 3 of 20TB or w/e :P

also i got 500GB and i use the 100 max... what movie i watch don't keep or things  goes like this

Posted

It will be crazy The interesting people about it in 4 years.... OMAGAD 60TB Is Just like New Evolution PC :P :P.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Posts

    • I'm using Myext64 HF and recently tried to replicate the "br_xmas09_event" Raising Rudolph Event. Detailed event information can be found at https://legacy-lineage2.com/news/_rudolf_the_red.html After configuring .eventdata.xml and starting the server, t  server log shows: 12/02/2025 15:39:01.809, [NO_ERROR] SpawnEx2 [br_xmas2009_invisible][schuttgart20_npc2213_xs03m1] [1][0][0][0][0][346796390] 12/02/2025 15:39:02.057, DummyPacket received from L2Server 12/02/2025 15:39:02.058, server socket close 312ac(f0820224) error(997) 12/02/2025 15:39:02.058, [CallStack][tid:0][tick:2][0] Begin 12/02/2025 15:39:02.058, [CallStack][tid:0][tick:2][1][0] void __cdecl IOThreadCallback::IOThread_common(void) 12/02/2025 15:39:02.059, [CallStack][tid:0][tick:2][2][1] void IOThread_common 1 12/02/2025 15:39:02.059, [CallStack][tid:0][tick:2][3][2] void __cdecl CIOSocketEx<class CIOBufferEx<16384> >::Close(void) 12/02/2025 15:39:02.059, [CallStack][tid:0][tick:2][4][3] void __cdecl CServerSocket::OnClose(void) 12/02/2025 15:39:02.059, [CallStack][tid:0][tick:2][5] End l2server log: 12/02/2025 15:39:02.112, npc server closed(127.0.0.1) error: 64 read buffer size: (server:0 npc:0) 12/02/2025 15:39:02.112, [NO_ERROR] L2Server is under protection mode!!! 12/02/2025 15:39:02.112, [NO_ERROR] L2Server is under protection mode!!! 12/02/2025 15:39:02.112, [NO_ERROR] L2Server is under protection mode!!! 12/02/2025 15:39:02.131, dwTime[0] < 80 !!!!!!! 12/02/2025 15:39:02.131, [CallStack][tid:7][tick:1][0] Begin 12/02/2025 15:39:02.132, [CallStack][tid:7][tick:1][1][0] void __cdecl IOThreadCallback::IOThread_common(void) 12/02/2025 15:39:02.132, [CallStack][tid:7][tick:1][2][1] void IOThread_common 1 12/02/2025 15:39:02.132, [CallStack][tid:7][tick:1][4][3] void __cdecl NpcSocket::OnClose(void) 12/02/2025 15:39:02.132, [CallStack][tid:7][tick:1][3][2] void __cdecl CIOSocketEx<class CIOBufferEx<16384> >::Close(void) 12/02/2025 15:39:02.132, [CallStack][tid:7][tick:1][5] End 12/02/2025 15:39:31.767, server closed(127.0.0.1) Error: 64 Read buffer size: (server:0 npc:0) 12/02/2025 15:39:31.768, [NO_ERROR] Logout All Characters : 1   The NPC server sent a packet to the L2 server while generating the br_xmas2009_invisible game NPC server, and the NPC server subsequently crashed.     After some digging, I found a clue in a very old MXC post, but the fix was for the GF version. The whole problem is in l2server side support for NPC function CreateOnePrivateNearUser. It sends CreatePacket but Koreans made some changes in it (added instance ID) so it got broken. As Santa event is the only AI that uses this function, they probably don't know about it    So is there a way to fix this problem, specifically for Myext64 HF? I'd be happy to buy him coffee.
    • Offtopic, personal attacks, probably too old to use that much memes and what's YOUR actual contribution to L2J, in order I laugh aswell ?   The main poster quotes my pack so I answer accordingly, while you advertise L2JFrozen in both of your posts - discontinued since 2014 (? 1132 rev), with none taking back the open source lead while anyone could.   If you're somewhat affiliated to hopzone, you probably packed way more money than me. Packs don't make any type of money (barely 100e/month) and if you would follow me, you would know there are ways to handle it or even getting paid.   Hope I was short enough, 🧂🤡.
    • Hi guys, this is a CMS im sharing for lineage 2 servers, im tired of the crap i see on new release servers. Dont let me start on the IA developed ones lmao.   📋 Description Free and open source template to create landing pages for Lineage 2 private servers. Designed with a dark fantasy theme and modern animations. ✨ Current Features This FREE version includes: Complete Landing Page - Professional design ready to use Multi-language Support - Spanish, English, Portuguese Dark Fantasy Theme - With animated UI elements Server Information - Rates, features, and rules Olympiad Ranking - Rankings display Download Section - For game client Skins and Animations Gallery Streaming Widget - Twitch/Kick integration Fully Customizable - Via configuration files ❌ Not Included in Free Version ❌ User Registration System ❌ Online Players Counter ❌ Donation Panel 💎 Premium Integrations IntegrationPrice Registration System $50 USD Online Players Counter $50 USD Donation Panel $50 USD   📧 Contact: https://gh0tstudio.com 🛠️ Tech Stack Technology    Version    Description React              19.2.0       UI Library TypeScript       5.8.2        Static typing Vite                 6.2.0         Build tool TailwindCSS   CDNCSS    Framework Lucide React   0.554.0         Icons i18next           23.16.0       Internationalization react-i18next   15.1.0        React bindings for i18n All documentation provided for AI AGENTS to make changes on the ui texts and so on. u can have a look on the cms fully working with donation panel, online count and register via: https://crmlineage2.vercel.app/ https://github.com/6h0T/CRM-LINEAGE2-FREE If u are in the lookings to develop a unique website for ur projects, u can dm me or contact me throw my socials on my profile. all code has encrypted references so any type of rebranding, copying or selling without authorization will result in take downs
    • Hello dude, i can help u out, i reached to u via DM, my studio is https://gh0tstudio.com i have worked with almost 40 brands on developing Private Lineage and Mu online servers, dashboard for vote pages and more. I sent u some examples too
    • L2 TARTARUS - HTML DESIGN       L2 KOMBAT - ANIMATED BORDER   L2 SERENITY - ANIMATED LOGO   L2 ARCANE - COMMUNITY BOARD     L2 AMERIKA - ADVERTISING BANNER   L2 ZERON - ADVERTISING BANNER  
  • Topics

×
×
  • Create New...

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock