Jump to content

[GR] CFW 6.20 και 6.60 PRO-B10 για όλα τα PSP


Recommended Posts

Για PSP 1000, 2000, 3000, GO, Ε-1000 που έχουν 6.20 ofw ή μικρότερο θα ακολουθήσουμε αυτόν τον οδηγό για να περάσουμε το CFW 6.20 PRO-B10, το οποίο είναι μόνιμο για όλα τα PSP. Όσοι έχουμε ήδη κάποιο προηγούμενο PRO-B τότε πρέπει να κάνουμε uninstall το παλιό και μετά να περάσουμε το καινούριο, διαβάστε τις οδηγίες μέσα στο spoiler.

 

Θα ακολουθήσουμε τον οδηγό παρακάτω μέχρι και το βήμα που τρέχουμε το "620 PRO-B Updater", σε εκείνο το σημείο θα επιλέξουμε uninstall, θα περιμένουμε να τελειώσει και να μας επιστρέψει στο menu του PSP, μετά θα ξανά τρέξουμε το "620 PRO-B Updater" και θα συνεχίσουμε με τα υπόλοιπα βήματα του οδηγού.

 

Εγκατάσταση του 6.20 PRO-B10

 

    Κατεβάζουμε από εδώ το 6.20 ofw για PSP 1000, 2000, 3000, Ε-1000 ενώ για PSP GO από εδώ, σε περίπτωση που έχουμε FW μικρότερο από 6.20 στο PSP, το βάζουμε στον φάκελο "ms0:/PSP/GAME/UPDATE/" και το κάνουμε εγκατάσταση.

    Κατεβάζουμε το CFW 6.20 PRO-B10 από εδώ.

    Περνάμε τον φάκελο "PSP" χύμα μέσα στην κάρτα μνήμης μας.

    -- Για psp 1000, 2000, 3000, Ε-1000:

    Στην διαδρομή "ms0:\"

    -- Για psp GO:

    Στην διαδρομή "fs0:\"

    Τρέχουμε μέσα από το psp το "620 PRO-B Updater".

    Τρέχουμε και το "620PRO_Permanent", στην πρώτη επιλογή θα πατήσουμε X.png, ενώ στην δεύτερη θα πατήσουμε O.png για να γίνει μόνιμο.

    Πηγαίνουμε στο "Settings->System Settings->System Information".

    Εκεί στο System Software πρέπει να γράφει 6.20 PRO-B10.

 

Για PSP 1000, 2000, 3000, GO, Ε-1000 που έχουν 6.60 ofw ή μικρότερο θα ακολουθήσουμε αυτόν τον οδηγό για να περάσουμε το CFW 6.60 PRO-B10. Όσοι έχουμε ήδη κάποιο προηγούμενο PRO-B τότε πρέπει να κάνουμε uninstall το παλιό και μετά να περάσουμε το καινούριο, διαβάστε τις οδηγίες μέσα στο spoiler.

Spoiler: ΕΜΦΑΝΙΣΕ

 

 

- To CFW 6.60 PRO-B10 είναι μόνιμο για όλα τα PSP 1000 και για τα PSP 2000 που έχουν σπασμένη μητρική(σε περίπτωση που δεν ξέρετε αν το PSP σας έχει σπασμένη μητρική διαβάστε τα Βοηθήματα Για Νέους εδώ)

- To CFW 6.60 PRO-B10 ΔΕΝ είναι μόνιμο για τα PSP 2000 που έχουν την άσπαστη μητρική, για όλα τα PSP 3000, όλα τα PSP GO και όλα τα E-1000.

 

Εγκατάσταση του 6.60 PRO-B10

 

    Κατεβάζουμε από εδώ το 6.60 ofw για PSP 1000, 2000, 3000, E-1000 ενώ για PSP GO από εδώ, σε περίπτωση που έχουμε FW μικρότερο από 6.60 στο PSP, το βάζουμε στον φάκελο "ms0:/PSP/GAME/UPDATE/" και το κάνουμε εγκατάσταση.

    Κατεβάζουμε το CFW 6.60 PRO-B10 από εδώ.

    Περνάμε τον φάκελο "PSP" χύμα μέσα στην κάρτα μνήμης μας.

    -- Για psp 1000, 2000, 3000, E-1000:

    Στην διαδρομή "ms0:\"

    -- Για psp GO:

    Στην διαδρομή "fs0:\"

    Τρέχουμε μέσα από το psp το "660 PRO-B Updater".

    Αν το PSP μας είναι το 1000 ή το 2000(από αυτά με την σπασμένη μητρική), τότε θα τρέξουμε και το "CIPL_Flasher" για να γίνει μόνιμο.

    Πηγαίνουμε στο "Settings->System Settings->System Information".

    Εκεί στο System Software πρέπει να γράφει 6.60 PRO-B10.

 

Καλό σας παιχνίδι με το νέο CFW!!!

 

Και να μην ξεχάσουμε ότι:

- Με το power+home, μπαίνουμε στο Official Firmware.

- Με το power+R σε Recovery Mode.

 

 

Για το πρόβλημα 9.90 ή 9.99 FW

Όσοι αντιμετωπίζετε το πρόβλημα που εμφανίζει ότι έχετε το 9.90 firmware και δεν σας αφήνει να κάνετε update θα πρέπει να συνδέσετε το PSP με τον υπολογιστή σας και από το vsh menu να εμφανίσετε τα αρχεία της flash αντί για το memory stick, μετά θα πάτε στο flash0:/vsh/etc/version.txt και θα το ανοίξετε για να αντικαταστήσετε το 9.90 γράφοντας ένα οποιοδήποτε μικρότερο νούμερο πχ 5.00 και θα το κάνετε αποθήκευση. Έπειτα θα σας αφήσει να κάνετε update. Μην ξεχάσετε να αλλάξετε από το VSH menu να δείχνει το memory stick αντί για τα περιεχόμενα της μνήμης flash!!!

Link to comment
Share on other sites

  • 2 weeks later...
  • 3 months later...

Maxtor den paizesai agori..epsaxna wres ena tetoio guide kai pouthena dn evriska..olo gia mpataries pandora kai magic stick evriska..se xilioeuxaristw..

Link to comment
Share on other sites

  • 3 months later...

Ελάτε στο PSPGR.net, όπου θα βρείτε την νέα αναβαθμισμένη έκδοση, και σας παρακαλώ να ΜΗΝ ξαναγίνει αντιγραφή χωρίς την άδεια μου.

 

Εδώ: http://pspgr.net/viewtopic.php?f=147&t=18774

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Posts

    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...