Jump to content
  • 0

mmm not sure


Question

Posted

ok  i have my server working on lan,all is good 

i have L2jServer Revision 7669

these are my settings bellow  my question is if i wanted to take it online how would i do it? if my external ip say was 123.2.43.167 Example how would i do it , can some one please help i tried before and took me 2 hours to get it work on lan again :(  I NEEED HELPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!! THANK YOU  THANK YOU THANK YOU@!!!!!!!!!!

 

 

 

 

Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = 192.168.1.2

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = 127.0.0.1

--------------------------------------------------------------------------------------------

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

#

# Note: External/Internal address definitions was moved to the ipconfig.xml

#

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1

 

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

 

# Bind address for gameserver. You should not need to change it in most cases.

# Default: * (0.0.0.0)

GameserverHostname = 192.168.1.2

 

 

-------------------

and

 

<?xml version="1.0" encoding="UTF-8"?>

<!-- Put old contents of ExternalHostname here, used by default -->

<gameserver address="192.168.1.2">

    <!-- Localhost access -->

    <define subnet="127.0.0.0/8" address="127.0.0.1" />

    <!-- LAN's, put old contents of InternalHostname here -->

    <define subnet="127.0.0.0/24" address="192.168.1.2" />

</gameserver>

 

 

 

 

all help is very much appreciated :) px im new and yes i used search function did not help :(

 

 

 

Recommended Posts

  • 0
Posted

You've entered this IP? 123.2.42.160? If yes, than this isn't a real IP address. You'll need to get a real one so you can start a server... =/ And 1 more thing.. You have router too. You'll need to open the ports that the server will use too. But first you'll need a real IP. If you want just you to connect on the server.. No problem.. You'll be able to if you just enter the IP of the router and you'll of course need to open the ports.. Like I said :P

  • 0
Posted

You've entered this IP? 123.2.42.160? If yes, than this isn't a real IP address. You'll need to get a real one so you can start a server... =/ And 1 more thing.. You have router too. You'll need to open the ports that the server will use too. But first you'll need a real IP. If you want just you to connect on the server.. No problem.. You'll be able to if you just enter the IP of the router and you'll of course need to open the ports.. Like I said :P

 

this is really my external ip lol 123.2.42.160

=i come rom Australia

i port forwarded all ports in router and still same error any ideas?

 

  • 0
Posted

this is really my external ip lol 123.2.42.160

=i come rom Australia

i port forwarded all ports in router and still same error any ideas?

 

 

I know that your External IP is this but it's not a REAL IP. I don't know what's the name of it in English but in my country we say it a REAL IP. When it's for example 88.52.145.67 it's a real one but when it starts with 123 or 10 or something like that it's not a real IP so you'll need hamachi and sh1ts so other players can connect to your server..

  • 0
Posted

nothing worked  :'(

am i able to set it up using lan settings then use hamachi to send it out to external players?

 

i attemped to run it through hammachi and it failed  -just cant get it to work :(((((

 

i mean ports un blocked >works on lan fine but cant seem to work with hamaich

my ip on hamachi -=5.162.108.25  since ei had to make a network ip =5.162.108.26

in config login server

 

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = 5.162.108.25    or do i make it  5.162.108.26?                    =5.162.108.25 works but cant connect from external ip and =5.162.108.26 fail to lunch login server :(

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

 

  • 0
Posted

Try reading my post one more time.

 

okk so your saying make it like this?

-------

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

-------------------------------------------------

---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

#

# Note: External/Internal address definitions was moved to the ipconfig.xml

#

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = *

 

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

 

# Bind address for gameserver. You should not need to change it in most cases.

# Default: * (0.0.0.0)

GameserverHostname = *

# Default: 7777

GameserverPort = 7777

---------------------------------------------?

  • 0
Posted

127.0.0.1 is like localhost.

 

You said "my question is if i wanted to take it online how would i do it?".

 

If u want to do this, put "123.2.43.167".

 

 

  • 0
Posted

127.0.0.1 is like localhost.

 

You said "my question is if i wanted to take it online how would i do it?".

 

If u want to do this, put "123.2.43.167".

 

 

and as you can see when i did that all i get is error's

  • 0
Posted

Why would you even setup server on your own PC?

I think you are waisting your time and time of those you will play on it!

Sorry for offtopic!

 

Have you cheked ipconfig.xml file?

 

  • 0
Posted

If you're using a router it will be harder to put the server on internet.

U need to connect to router and add 3 new ports ............

but if u have a direct connection (pppoe connection) u need only to know ure ip and to put it on server.proprieties config

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Posts

    • Recommended seller, I'm using his services. Good luck @Ave
    • https://l2.gamedream.pl/ Update #2 — GameDream Interlude (C6)     This update focuses on Epic bosses, quest chains and overall QoL :cool Highlights: Frintezza access follows a full retail-like chain: Four Goblets → Last Imperial Prince → Journey to a Settlement Retail-like entry requirements restored (scroll + Command Channel) Four Goblets quest is now available in-game Shot visuals synced with attack/skill usage Community Board Premium Shop refreshed with classic Interlude buttons and cleaner tables Epic Raidboss access: Frintezza — 4–5 party Command Channel + scroll + Antique Brooch Antharas — Portal Stone Baium — Bloody Fabric Valakas — Floating Stone Queen Ant / Core / Orfen / Zaken — no quest gates Bug Fixes & QoL: Frintezza quest chain fully fixed TvT rewards — single reward + anti-abuse protection Shots — no double triggering Premium Shop — no blank tabs Mammon NPCs in Giran working correctly Cancel works retail-like (up to 5 buffs removed) Summon Friend fixed with anti-exploit guards YetiBuffer — Saved Buff Profiles (Save / Clear / Restore) PvE — increased aggro range + balance tweaks EXP toggle commands: expoff / expon / expblock Thanks for testing and feedback — more updates coming soon ❤️
    • Hello I would like to offer You my NEW 2026 Updater / Launcher with custom skins.   - UPDATER FEATURES -   1. Performance and Intelligent Resource Management: Smart Disk Detection (SSD/HDD): The updater automatically detects the user's drive type. For SSD/NVMe drives: Launches up to 8-12 concurrent threads, utilizing the full yet optimized connection speed. For HDD drives: Limits the thread count (to 2-3) to prevent computer slowdowns and avoid overloading the drive head. Multi-threaded Downloading: Instead of downloading file by file, the updater downloads multiple files simultaneously, drastically reducing update time. ZSTD Compression: Support for the modern Zstandard compression algorithm (.zst). Files are downloaded in compressed form and decompressed on the fly, saving bandwidth and accelerating downloads. HTTP/2 and Keep-Alive Support: Utilizing the HTTP/2 protocol and persistent connections allows for the instant download of thousands of small files without establishing a new connection for each one.   2. Modern User Interface (UI/UX): Transparency and PNG Graphics: Support for irregular window shapes, allowing for the creation of a unique, modern launcher look. Taskbar Integration: The progress bar is displayed not only in the window but also on the Windows taskbar icon. Built-in News Browser (Optional): The updater features a built-in browser module that displays news/changelogs directly within the launcher (without opening an external browser). Multi-language Support (Optional): Built-in language switching system (e.g., EN/PL/RU, etc.) with dynamic loading of button graphics and text. Animated Buttons (Optional): Dedicated, animated buttons redirecting to Discord, Facebook, YouTube, Instagram, and the website.   3. Technical Features and Application Security: Anti-Dual Run (Optional): The updater checks if the game is already running to prevent file conflicts during updates. Error Diagnostics: Built-in logging system (debug_log.txt) and hardware exception handling (SEH), facilitating the diagnosis of problems for players who cannot run the game. Internal Configuration: Updater settings are stored inside the .exe file, eliminating publicly accessible configuration files.   4. File Categorization (Normal vs. Critical vs. Once): Critical Files: Critical files are verified more thoroughly (via MD5 Hash) even in quick check mode to guarantee stability. Normal Files: Standard game files (textures, models, sounds) are checked depending on the selected mode (Quick vs. Full). Once Files (Overwrite Exclusions): Applies to user configuration files (e.g., Option.ini, User.ini).   5. Check Modes (Verification Algorithms): Self-Update: The updater can update itself before checking game files, allowing for easy deployment of launcher fixes. The updater supports two main operating modes that switch intelligently based on user action: Smart Check (Startup Quick Check): Runs automatically upon updater startup or pressing the START button (unless a full check is forced). Full Check (Full MD5 Verification): Manually triggered by the player via the "Full Check" button. Automatic Update Detection: If a newer version of a file appears on the server, it is automatically detected and downloaded without player interaction. Atomic Updates: Files are downloaded and verified first, and only then saved to the disk. This prevents game client corruption in case of internet connection loss. The entire process takes seconds, even with clients weighing 30GB+. - PATCH BUILDER FEATURES -   1. Professional File Structure Management (Tree-List Hybrid): Directory Tree Visualization: Instead of a flat file list, the Builder displays a clear structure of folders and subfolders. You can collapse and expand entire tree branches, facilitating work with thousands of files. Normal and Critical Division: A clear window division into two main zones: Normal Files and Critical Files. Ghost and Excluded Files Division: The interface visually informs about the status of unchanged files (existing in the previous patch version) and files excluded from the update. Show/Hide Ghosts: With one click, you can hide unchanged files to focus solely on what you are actually sending to players in this update.   2. Intuitive Interaction: Drag & Drop: Full Drag & Drop support. You can grab files or entire folders and drag them between the "Normal" and "Critical" lists. Transfer is intelligent – it moves the entire content of selected folders. Keyboard Shortcuts: Fast workflow thanks to keyboard support: Delete, Enter, Ctrl+A / Ctrl+C (select and copy paths).   3. Advanced Filtering and Searching: Context Search: The search bar works in real-time, filtering the file tree. Type /folder: Searches only within folder names. Type *ex: Shows only excluded files. Standard Typing: Searches files by name.   4. Automation and Security: Auto Self-Update: The Builder automatically detects the updater executable file. Real-Time Statistics: The status bar continuously shows the file count (Normal/Critical), total patch weight (in Bytes/MB/GB), and the last update date. System File Protection: Files marked as "Critical" cannot be accidentally added to the exclusion list – the program blocks such actions.   5. Performance (Backend): ZSTD Compression: The Builder uses the latest Zstandard algorithm to compress files before sending, ensuring a significantly smaller patch size than standard ZIP, saving server bandwidth and player time. Multi-threading: The packing and MD5 checksum generation process utilizes multiple CPU threads, drastically reducing patch building time.   - PRICING - NEW Updater standard price: 79 euro (if You ask for mods, price will change).   - CONTACT - Discord: ave7309   CLICK HERE TO CHECK LATEST TEMPLATES!                         * I have right to REFUSE to take an order. * Supported games: Lineage 2 / Black Desert / MU Online / Tantra / Rohan / Aion / Cabal / Fiesta any more...  
    • 🔥 Upgrade Your Server's Visual Identity 🔥 Hello Community! We are proud to present the Shadowbane Collection – a premium, oriental-style visual suite designed specifically for Metin2 and Silkroad private servers. Forget about static, boring pages. Give your players a true "AAA" experience with a fully animated video header and a professional brand identity. 🎥 VIDEO PREVIEW   🐉 1. Shadowbane – Animated HTML Website Template A fully coded, responsive website template with a stunning video background. No coding skills required – just upload and configure! 🚀 Technology: HTML5 / CSS3 / JS (No PSD, ready code) 🎥 Animated Header: Loopable video background included (.mp4) 📱 Responsive: Works perfectly on Mobile & Desktop 📂 Pages Included: Home, Rankings, Register, Download, News 👉 DOWNLOAD WEBSITE TEMPLATE HERE       ⚔️ 2. Shadowbane – Game Logo & Text Effect Complete your branding with this matching Logo Template. It works as a Photoshop Text Effect – just type your server name! 🎨 Style: Oriental Gold & Brush Ink ⚡ Easy Edit: Smart Objects (One-click change) 🎁 Bonus: Social Media Kit included (Banner + Avatar) 👉 DOWNLOAD LOGO TEMPLATE HERE 🎁 SPECIAL LAUNCH DISCOUNT 🎁 For forum members, we have prepared a special code. Get 20% OFF on your entire order! CODE: LOVEM2 Elevate your server today with Pixarts.store  
    • Contact me on discord have an offer for you. l2avalon.net  
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..