Jump to content
MaxCheaters Official Group on Discord
Top.MaxCheaters.com is now OPEN – Lineage 2 Top Listing
L2JForge.live Interlude Premium Emulator
  • 0

[Help]Reg Server Error

GrothMoth

Asked by GrothMoth,

 Share

Question

14 answers to this question

Recommended Posts

  • 0
GrothMoth Newbie

GrothMoth

Posted
  • Author
Posted 

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname
# Common settings...
# 127.0.0.1 - If you are playing alone on a test server
# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect
# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
ExternalHostname = 188.121.194.220

# ---------------------------------------------------------------------------
# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.
# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.
# ---------------------------------------------------------------------------
# Default: 127.0.0.1
InternalHostname = 188.121.194.220

# ---------------------------------------------------------------------------
# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers
# local IP if you want people outside your internal network to be able to connect to your server.
# ---------------------------------------------------------------------------
# RouterHostname = 

# Bind ip of the LoginServer, use * to bind on all available IPs
# Default: *
LoginserverHostname = *

# Default: 2106
LoginserverPort = 2106

# The address on which login will listen for GameServers, use * to bind on all available IPs
# Default: *
LoginHostname = *

# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)
# Default: 15
IpUpdateTime = 15


# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True

# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600

# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False

# Enforce GameGuard authorization from client?
# If True, login server will kick client if the client bypassed GameGuard authentication.
# Default: False
ForceGGAuth = False

# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True

# Default: 15
FastConnectionLimit = 15

# Default: 700
NormalConnectionTime = 700

# Default: 350
FastConnectionTime = 350

# Default: 50
MaxConnectionPerIP = 50


# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jdb (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jdb
# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password = 
URL = jdbc:mysql://localhost/l2jdb
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 

# Default: 10
MaximumDbConnections = 10

# Default: 0
MaximumDbIdleTime = 0


# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: False
ShowLicence = False

# Default: True
AutoCreateAccounts = True


# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False

# Default: False
Assert = False

# Default: False
Developer = False

 

Dude my ip Is : 188.121.194.220 Can u edit and write here again ?

  • 0
CarmineAngelo Newbie

CarmineAngelo

Posted
Posted

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 188.121.194.220

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 188.121.194.220

 

# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname =

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

 

 

# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = True

 

# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10

 

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600

 

# If set to True any GameServer can register on your login's free slots

# Default: False

AcceptNewGameServer = True

 

# Enforce GameGuard authorization from client?

# If True, login server will kick client if the client bypassed GameGuard authentication.

# Default: False

ForceGGAuth = False

 

# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = True

 

# Default: 15

FastConnectionLimit = 15

 

# Default: 700

NormalConnectionTime = 700

 

# Default: 350

FastConnectionTime = 350

 

# Default: 50

MaxConnectionPerIP = 50

 

 

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password =

 

# Default: 10

MaximumDbConnections = 10

 

# Default: 0

MaximumDbIdleTime = 0

 

 

# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: False

ShowLicence = False

 

# Default: True

AutoCreateAccounts = True

 

 

# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = False

 

# Default: False

Assert = False

 

# Default: False

Developer = False

 

Dude my ip Is : 188.121.194.220 Can u edit and write here again ?

 

 

Fix that i marked

  • 0
CarmineAngelo Newbie

CarmineAngelo

Posted
Posted

Password =  ? i know but i have deleted ^^

the problem is there

 

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =

URL = jdbc:mysql://localhost/l2jdb

# Database user info (default is "root" but it's not recommended)

Login = root

# Database connection password

Password =

Guest
This topic is now closed to further replies.
 Share
Go to question listing


  • Posts

    • l2naylondev
      Sell daily reward 28 days sell

      By l2naylondev · Posted

      <dailyReward days="28" autoOpen="true" minimumOnlineTimeSeconds="30" oneRewardPerIP="true" resetIfMissDay="true">   For now, I have these settings in the XML—this is the V1 version I created, though I plan to make further improvements over time. Of course, I’ll also add more protections—MAC, HWID, and perhaps others like account-based restrictions—to make it more secure. We can also implement non-tradable items to further enhance the system's security. I’ll keep posting updates and refining both the system and the interface. I might make a video tomorrow; if you look at the top, you'll see the "auto-open" feature can be toggled on or off, allowing users to rely solely on the `.daily` command. Cheers! Note: If I sell it in this state, I’ll provide support and roll out updates to users. I’m not forcing anyone to buy anything; I’d even provide the patch files so that anyone with the necessary skills can add features, modify it, or improve it further.
    • ZhangX
      WTB no collision characters

      By ZhangX · Posted

      If the problem is that the target is lost, the action of aiming at another character, upon losing collision, does not allow aiming.   This one works as it should, allowing you to target characters
    • NeoPacket0041
      HQ Photoshop | Verify Accs KYC, AML | Antiban 100% | PSD Tem

      By NeoPacket0041 · Posted

      MICROTEXT AND WATERMARKS BREAK MOST RENDERINGS Microtext and watermarks aren’t just small decorative details. They are one of the most common reasons a document fails verification, even when it looks decent at first glance. The issue is that these elements are almost impossible to reproduce “by eye.” Microtext requires precise geometry and legibility at a very small size, while a watermark needs the correct density, transparency, and accurate placement relative to other security features. Any deviation becomes obvious during detailed inspection. ▪ What’s most often done wrong: - microtext is drawn too thick or blurry - the watermark is made either too visible or almost invisible - the positioning between microtext and watermark is ignored - the original printing technology isn’t taken into account when choosing density and shape - The stronger the document’s security features, the less room there is for approximation. What matters here isn’t visual similarity, but accurate reproduction of the original technical characteristics. If your document contains microtext and watermarks, this is always an area that requires extra attention. Write to us in DMs. We’ll review your case and point out exactly which details need the highest precision during rendering. › TG: @mustang_service_ms ( https:// t.me/ mustang_service_ms ) › Channel: Mustang Service ( https:// t.me/ +JPpJCETg-xM1NjNl ) #drawing #microtext #photoshop #editing #watermarks
    • VPSLab
      — VPSLAB — Fast & Private RDP/VPS | 100% Instant Setup

      By VPSLab · Posted

      Active & Taking orders!
    • Daupz
      [L2J] GoldRush Mid-Rate

      By Daupz · Posted

      GoldRush launches tomorrow! July 18 16:00 GMT+3 Europe / International Register your account in the website, connect wallet and be ready to dominate!

  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..