Jump to content

Recommended Posts

Posted

ok for example

 

<skill id="312" levels="20" name="Vicious Stance" enchantLevels1="30" enchantLevels2="30" >

  <table name="#enchantMagicLvl"> 76 76 76 77 77 77 78 78 78 79 79 79 80 80 80 81 81 81 82 82 82 82 83 83 83 84 84 85 85 85 </table>

  <enchant1 name="magicLvl" val="#enchantMagicLvl"/>

  <enchant2 name="magicLvl" val="#enchantMagicLvl"/>

  <table name="#mpConsume_Init"> 4 5 5 6 7 7 8 9 9 10 10 11 11 12 12 13 13 13 14 14 </table>

  <table name="#crit"> 35 48 64 84 109 139 166 196 229 266 306 349 379 410 443 475 509 542 576 609 </table>

  <!-- #val is calculated as 0.4 x magic level -->

  <table name="#val"> 8 9.6 11.2 12.8 14.4 16 17.2 18.4 19.6 20.8 22 23.2 24 24.8 25.6 26.4 27.2 28 28.8 29.6 </table>

  <table name="#ench1MpConsume_Init"> 13 13 13 14 14 14 14 14 14 14 14 14 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0 0 0 0 </table>

  <table name="#ench1crit">

  615 620 626 631 637 642 648 653 659 664

  670 675 681 686 692 697 702 708 713 719

  724 730 735 741 746 752 757 763 768 774

  </table>

  <!-- #ench1val is calculated as 0.4 x magic level -->

  <table name="#ench1val"> 30.4 30.4 30.4 30.8 30.8 30.8 31.2 31.2 31.2 31.6 31.6 31.6 32 32 32 32.4 32.4 32.4 32.8 32.8 32.8 33.2 33.2 33.2 33.6 33.6 33.6 34 34 34 </table>

  <table name="#ench2MpConsume_Init"> 13 13 13 12 12 12 11 11 11 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 4 4 </table>

  <!-- #ench2val is calculated as 0.39 -> 0.31 x magic level -->

  <table name="#ench2val"> 29.64 29.64 29.64 29.26 29.26 29.26 29.64 28.86 28.86 29.23 28.44 28.44 28.8 28.8 28 28.35 28.35 27.54 27.88 27.88 27.88 27.39 27.39 27.39 26.88 26.88 26.88 27.2 26.35 26.35 </table>

  <set name="power" val="0.0"/>

  <set name="mpInitialConsume" val="#mpConsume_Init"/>

  <set name="target" val="TARGET_SELF"/>

  <set name="skillType" val="CONT"/>

  <set name="operateType" val="OP_TOGGLE"/>

  <set name="castRange" val="-1"/>

  <set name="effectRange" val="-1"/>

  <enchant1 name="mpInitialConsume" val="#ench1MpConsume_Init"/>

  <enchant2 name="mpInitialConsume" val="#ench2MpConsume_Init"/>

  <for>

    <effect count="0x7fffffff" name="ManaDamOverTime" time="5" val="#val">

      <add order="0x40" stat="cAtk" val="#crit"/>

    </effect>

  </for>

  <enchant1for>

    <effect count="0x7fffffff" name="ManaDamOverTime" time="5" val="#ench1val">

      <add order="0x40" stat="cAtk" val="#ench1crit"/>

    </effect>

  </enchant1for>

  <enchant2for>

    <effect count="0x7fffffff" name="ManaDamOverTime" time="5" val="#ench2val">

      <add order="0x40" stat="cAtk" val="609"/>

    </effect>

  </enchant2for>

</skill>

 

<table name="#crit"> 35 48 64 84 109 139 166 196 229 266 306 349 379 410 443 475 509 542 576 609 </table> <==== make them lower or higher and its done deal :P

Posted

but that would edit the critical rate (i think) i just want to lower the critical power

 

Vicious Stance does not add crit rate it adds critical power.

Posted

Vicious Stance does not add crit rate it adds critical power.

rofl i know but i dont to edit vicious stance i want to edit for example sonic buster critical power
Posted

rofl i know but i dont to edit vicious stance i want to edit for example sonic buster critical power

 

thats not a critical power thats skill power lol and its same as critical power

 

Posted

thats not a critical power thats skill power lol and its same as critical power

 

...

 

dude...

 

the critical power affects the damage that u make ONLY in a CRITICAL ATTACK, also dont confuse this with the POWER of the skill that affects the critical power but ALSO affects the normal damage thats why i dont want to lower the power of the skill

Posted

OMG dude its the same but the table is not called #crit its called #power or something like that u edit the values adn u have higher skill power the same!!! ok like this

 

<skill id="6" levels="37" name="Sonic Blaster" e1Type="Power" e2Type="Cost">

<table name="#power"> 369 392 417 442 469 496 525 555 586 618 651 686 722 758 796 835 875 916 959 1002 1046 1091 1136 1183 1230 1278 1327 1376 1425 1475 1525 1576 1626 1677 1727 1777 1827 </table>

  <table name="#mpConsume"> 28 29 30 30 31 32 33 34 35 36 37 38 39 39 40 41 42 43 44 45 46 47 47 48 49 49 50 51 52 53 54 55 55 56 57 58 58 </table>

  <table name="#e1power"> 1843 1860 1876 1893 1909 1925 1942 1958 1975 1991 2008 2024 2041 2057 2074 2090 2107 2123 2139 2156 2172 2189 2205 2222 2238 2255 2271 2288 2304 2321 </table>

  <table name="#e2cost"> 58 57 56 55 54 53 52 52 51 50 49 48 47 46 46 45 44 43 42 41 41 40 39 38 37 36 35 35 34 33 </table>

  <enchant2 name="mpConsume" val="#e2cost"/>

  <enchant1 name="power" val="#e1power"/>

  <set name="weaponsAllowed" val="sword,sword_dual,blunt"/>

  <set name="mpConsume" val="#mpConsume"/>

  <set name="power" val="#power"/>

  <set name="target" val="TARGET_ONE"/>

  <set name="hitTime" val="1900"/>

  <set name="SSBoost" val="2.0"/>

  <set name="reuseDelay" val="10000"/>

  <set name="skillTime" val="1900"/>

  <set name="skillType" val="CHARGEDAM"/>

  <set name="operateType" val="OP_ACTIVE"/>

  <set name="castRange" val="600"/>

  <set name="effectRange" val="1100"/>

  <set name="baseCritRate" val="15"/>

  <set name="num_charges" val="2"/>

  <set name="charge_skill_id" val="8"/> <!-- Focus Sonic is the charger -->

</skill>

 

<table name="#power"> 369 392 417 442 469 496 525 555 586 618 651 686 722 758 796 835 875 916 959 1002 1046 1091 1136 1183 1230 1278 1327 1376 1425 1475 1525 1576 1626 1677 1727 1777 1827 </table> change this or only change the last lvl 1827 make it 18000 only the 37 lvl of this skill will be 10 times stronger.

 

GL and tell if this is what your problem is

 

...

 

dude...

 

the critical power affects the damage that u make ONLY in a CRITICAL ATTACK, also dont confuse this with the POWER of the skill that affects the critical power but ALSO affects the normal damage thats why i dont want to lower the power of the skill

 

and OMG im not a noob i was trying to give u some hints but i must explain u the whole procedure.

 

thats not a critical power thats skill power lol and its same as critical power

with this i mean procedure is the same as changin critical power "CHANGE THE TABLES!!!"

  • 2 weeks later...
  • 1 year later...
Guest
This topic is now closed to further replies.


  • Posts

    • Конвертация формы пакета Старый ⇄ Новый в один клик Создание новых пакетов любой формы Шифрование Lineage2Ver121 (включается в пакет пакета) Безопасное редактирование: работа в копии, полная история отмен (Ctrl+Z / Ctrl+Shift+Z), одна кнопка «Сохранить» Интеграция с системой Открытие .utx / .ugx наклона клика по проводнику (ассоциации регистрируются при установке) один пример: открытие файла добавить его вкладку в уже запущенное окно Мультиязычный интерфейс (EN, RU, UK, ES, PT, EL, KO, VI, ZH) — язык подхватывается из системы   Поддерживаемые форматы Пакеты:  UTX, UGX Текстуры:  RGBA8, DXT1, DXT3, DXT5, G16, P8 Ресурсы:  GFX (Scaleform) Требования Windows. Java не требуется — включена в сборку. Установка Запустите  La2Tools-3.0.2.exe  — инсталлятор создаст ярлыки и зарегистрирует связанные файлы. Либо воспользуйтесь портативной версией. https://la2.tools/files/La2Tools_3.0.3_setup.exe   https://la2.tools/files/La2Tools_3.0.3_portable.zip  - Портативная версия  
    • WHEN SAYING “YES” IS A MISTAKE Not every project is worth taking on, even if the client is ready to pay. Sometimes refusing isn’t about losing money — it’s about protecting your reputation and time. Over the years, we’ve learned to quickly spot the cases that are almost guaranteed to turn into problems. Here are the most common situations where we turn down work: ▪ The client wants it “like everyone else’s,” but with lots of custom changes and on a minimal budget ▪ There are no proper source materials, yet the deadlines are already burning and everything is needed “yesterday” ▪ Constant changes to requirements after the work has already started ▪ A task with a very low chance of success, but very high expectations ▪ The client isn’t willing to discuss the process and sees us as just an executor - A good result almost always starts when both sides have an honest understanding of the risks and real possibilities of the project. If you’re currently discussing a project and unsure whether to move forward — write to us. We’ll honestly and directly tell you whether it’s worth taking on or if it’s better to look for another solution. › TG: @mustang_service_ms ( https:// t.me/ mustang_service_ms ) › Channel: Mustang Service ( https:// t.me/ +JPpJCETg-xM1NjNl ) #documents #drawing #photoshop #refuse #cases
    • The price reflects the value of the project, not just the source files. This is a complete, production-ready server that has already proven itself over the course of a full year, with a loyal player base and no major issues requiring ongoing development. To put it into perspective, the asking price is approximately what the server generated in one year. You're not buying an unfinished pack that still needs months of work, you're buying a polished, fully tested, revenue-proven project that's ready to go online. Considering that, I believe €35000 is a fair price.
    • How we can explain the amount? Is something special there in?
    • You can actually use both, walker is more realable and easy to use! Search on forum you can find some posts. 👽
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..