Jump to content

Ultimate Counter Strike AWP Guide..By `ReVenGeR^ (BaCk To SharesS^)


Recommended Posts

Hello there,in this guide i will teach you the basik about beign good with sniper weapons..This guide is totally mine so credits go to `ReVenGeR^

 

 

Follow the next steps and you will be unkillable

 

 

1)Find a server,login and now watch carefully the map..If there is a small map with weird roads,etc don't play with sniper..You'll need to find a big server with some hiding spots..Some examples from good servers about sniper

is..

 

1)Cs_Italy

2)De_Dust2

3)De_Aztec

4)De_train

5)De_Dust

 

AND..For better "sniper work" we will need many players on the server...

 

Okay lets start!

 

 

2)When you login and become terro or ct..you have to buy your sniper..I Do suggest you to take AWP..

 

(Artic Warfare Magnum)

awp.jpg

 

Manufacturer: Accuracy International

Cost: $4750

Ammo Per Clip/Ammo Held in Weapon: 10 rounds

Max Reserved Ammo: 30 Rounds

Special Weapon Function: 2.25x zoom/9x zoom

Power: Very High

Range: Very Large

Accuracy: Very high

Ammo: .338 Lapua (10-round mags)

Reload speed: Medium

Cyclic rate: Low

 

Overview: This brings the term one-shot-one-kill to life in Counter-Strike, this weapons weak points are it's zoom out period to bolt the weapon, and it's horrible performance in CQB, or Close Quarter Battle. Duck and zoom for full accuracy, but a strafe and stop should get you enough accuracy to get most players. It should be noted that, due to an oversight, this weapon is usually called the AWP, Arctic Warfare Police, but it is actually an AWM, or Arctic Warfare Magnum.

 

=================================================================ReVenGeR==========================================

 

 

3)When you buy it you'll need to "find your place" The place where you will have the oportunity to find enemies

without they will be able to find you,watch the next video,it will help you!

 

http://www.youtube.com/watch?v=0ECwGr3Z52g

 

 

 

4)The Aim-The Shot!

In order to do a kill..you have to be FAST..and when i am saying fast i mean..when you see ur enemy..Fvck him out.

Don't w8 to target him,just move your mousepad the way he is and shot..Look the video bellow to understand what i

mean

 

 

http://www.youtube.com/watch?v=fyUCCfOEPtA

 

 

5)The "Evasion" As you saw on the first video..i always going..

In and out..That's the seret..you have to do it..so you have to go out for 2 sec..Shoot when u automatically target and then go ASAP back.. (its good to hide behind boxes,cars)

 

 

6)UpdateQuick scope..

 

Bind your muse..the press attack2 + attack so,you are scoping with ur mouse..When you scop just Shot Str8 forward to your target,next time you have to w8 until the scope appear cause then is auto..You gotta practice it..

 

 

 

The last video is not mine

 

Link to comment
Share on other sites

WoW awesome guide Tony...You helped me a lot as i am noob on CS and i want to go PRO :D...thx a lot...the description about the sniper is too helpfull :D!Keep sharing :D

Link to comment
Share on other sites

Indeed is a good guide, but you forgot the most popular step to go pro!

What is this? Is Quick scope!!! I think you know what is it... Edit your guide and add the quick scope step... And i will reward you! ^^

Link to comment
Share on other sites

Indeed is a good guide, but you forgot the most popular step to go pro!

What is this? Is Quick scope!!! I think you know what is it... Edit your guide and add the quick scope step... And i will reward you! ^^

-Added both guide + vid with credits
Link to comment
Share on other sites

-Added both guide + vid with credits

 

Thanks for edit that i told you! Good Job!

What i forgert? hmm nothing....

 

 

 

:P +1 karma as i promised you ;)

Link to comment
Share on other sites

Well, nice guide but I have to mention something here..

DO NOT USE AWP IN 1.6...

It's zoom is TOO much slow, it need 2 secs to zoom..This ain't good..

I wouldn't use AWP if I was you, only in CSS!

Link to comment
Share on other sites

InfecteD[™" post=509654" timestamp="1247496320]

Well, nice guide but I have to mention something here..

DO NOT USE AWP IN 1.6...

It's zoom is TOO much slow, it need 2 secs to zoom..This ain't good..

I wouldn't use AWP if I was you, only in CSS!

there are some maps that AWP pwn :D
Link to comment
Share on other sites

I doubt this guide is your because the English language level the guide is written with is just not yours. You're not that good in English.

 

Anyways, good job.

Link to comment
Share on other sites

Finally something looking like a guide ! But for an good or pro AWP guide it has to be much more detailed when it comes to evasion and accuracy ...

Finally u became reasonable xD

This guide is really good and i think it's 100% ReVenGeR's....

I really like ur guides Rev...

Keep sharing mate...

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Posts

    • Thank you 😊👍 working great! 
    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...