Discussion How Can I Boost My Sql Database ?

[mfg_1984]

# Other default tuning values
# MySQL Server Instance Configuration File
# ----------------------------------------------------------------------
# Generated by the MySQL Server Instance Configuration Wizard
#
#
# Installation Instructions
# ----------------------------------------------------------------------
#
# On Linux you can copy this file to /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options
# (@localstatedir@ for this installation) or to
# ~/.my.cnf to set user-specific options.
#
# On Windows you should keep this file in the installation directory 
# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To
# make sure the server reads the config file use the startup option 
# "--defaults-file". 
#
# To run run the server from the command line, execute this in a 
# command line shell, e.g.
# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# To install the server as a Windows service manually, execute this in a 
# command line shell, e.g.
# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"
#
# And then execute this in a command line shell to start the server, e.g.
# net start MySQLXY
#
#
# Guildlines for editing this file
# ----------------------------------------------------------------------
#
# In this file, you can use all long options that the program supports.
# If you want to know the options a program supports, start the program
# with the "--help" option.
#
# More detailed information about the individual options can also be
# found in the manual.
#
# For advice on how to change settings please see
# http://dev.mysql.com/doc/refman/5.7/en/server-configuration-defaults.html
#
#
# CLIENT SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by MySQL client applications.
# Note that only client applications shipped by MySQL are guaranteed
# to read this section. If you want your own MySQL client program to
# honor these values, you need to specify it as an option during the
# MySQL client library initialization.
#
[client]

# pipe
# socket=0.0
port=3306

[mysql]
no-beep

default-character-set=utf8


# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this 
# file.
#
# server_type=2
[mysqld]

# The next three options are mutually exclusive to SERVER_PORT below.
# skip-networking

# enable-named-pipe

# shared-memory

# shared-memory-base-name=MYSQL

# The Pipe the MySQL Server will use
# socket=MYSQL

# The TCP/IP Port the MySQL Server will listen on
port=3306

# Path to installation directory. All paths are usually resolved relative to this.
# basedir="C:/Program Files/MySQL/MySQL Server 5.7/"

# Path to the database root
datadir=C:/ProgramData/MySQL/MySQL Server 5.7\Data

# The default character set that will be used when a new schema or table is
# created and no character set is defined
character-set-server=utf8

# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB

# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# Enable Windows Authentication
# plugin-load=authentication_windows.dll

# General and Slow logging.
log-output=FILE
general-log=0
general_log_file="NS3054556.log"
slow-query-log=1
slow_query_log_file="NS3054556-slow.log"
long_query_time=10

# Binary Logging.
# log-bin

# Error Logging.
log-error="NS3054556.err"

# Server Id.
server-id=1

# Secure File Priv.
secure-file-priv="C:/ProgramData/MySQL/MySQL Server 5.7/Uploads"

# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=2000

# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0

# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_open_cache=8000

# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=6G

# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before.  This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=10

#*** MyISAM Specific options
# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method.  This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=8G

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=8M

# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=10M
read_rnd_buffer_size=1G

#*** INNODB Specific options ***
# innodb_data_home_dir=0.0

# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
# skip-innodb

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=64M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system.  Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=10G

# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=2G

# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=17

# The increment size (in MB) for extending the size of an auto-extend InnoDB system tablespace file when it becomes full.
innodb_autoextend_increment=64

# The number of regions that the InnoDB buffer pool is divided into.
# For systems with buffer pools in the multi-gigabyte range, dividing the buffer pool into separate instances can improve concurrency,
# by reducing contention as different threads read and write to cached pages.
innodb_buffer_pool_instances=8

# Determines the number of threads that can enter InnoDB concurrently.
innodb_concurrency_tickets=5000

# Specifies how long in milliseconds (ms) a block inserted into the old sublist must stay there after its first access before
# it can be moved to the new sublist.
innodb_old_blocks_time=1000

# It specifies the maximum number of .ibd files that MySQL can keep open at one time. The minimum value is 10.
innodb_open_files=1000

# When this variable is enabled, InnoDB updates statistics during metadata statements.
innodb_stats_on_metadata=0

# When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB stores the data and indexes for each newly created table
# in a separate .ibd file, rather than in the system tablespace.
innodb_file_per_table=1

# Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb, 3 for strict_innodb, 4 for none, 5 for strict_none.
innodb_checksum_algorithm=0

# The number of outstanding connection requests MySQL can have.
# This option is useful when the main MySQL thread gets many connection requests in a very short time.
# It then takes some time (although very little) for the main thread to check the connection and start a new thread.
# The back_log value indicates how many requests can be stacked during this short time before MySQL momentarily
# stops answering new requests.
# You need to increase this only if you expect a large number of connections in a short period of time.
back_log=80

# If this is set to a nonzero value, all tables are closed every flush_time seconds to free up resources and
# synchronize unflushed data to disk.
# This option is best used only on systems with minimal resources.
flush_time=0

# The minimum size of the buffer that is used for plain index scans, range index scans, and joins that do not use
# indexes and thus perform full table scans.
join_buffer_size=10M

# The maximum size of one packet or any generated or intermediate string, or any parameter sent by the
# mysql_stmt_send_long_data() C API function.
max_allowed_packet=4M

# If more than this many successive connection requests from a host are interrupted without a successful connection,
# the server blocks that host from performing further connections.
max_connect_errors=100

# Changes the number of file descriptors available to mysqld.
# You should try increasing the value of this option if mysqld gives you the error "Too many open files".
open_files_limit=4161

# Set the query cache type. 0 for OFF, 1 for ON and 2 for DEMAND.
query_cache_type=0

# If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you can consider increasing the
# sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be improved with query optimization
# or improved indexing.
sort_buffer_size=30M

# The number of table definitions (from .frm files) that can be stored in the definition cache.
# If you use a large number of tables, you can create a large table definition cache to speed up opening of tables.
# The table definition cache takes less space and does not use file descriptors, unlike the normal table cache.
# The minimum and default values are both 400.
table_definition_cache=3500

# Specify the maximum size of a row-based binary log event, in bytes.
# Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256.
binlog_row_event_max_size=8K

# If the value of this variable is greater than 0, a replication slave synchronizes its master.info file to disk.
# (using fdatasync()) after every sync_master_info events.
sync_master_info=10000

# If the value of this variable is greater than 0, the MySQL server synchronizes its relay log to disk.
# (using fdatasync()) after every sync_relay_log writes to the relay log.
sync_relay_log=10000

# If the value of this variable is greater than 0, a replication slave synchronizes its relay-log.info file to disk.
# (using fdatasync()) after every sync_relay_log_info transactions.
sync_relay_log_info=10000

# Load mysql plugins at start."plugin_x ; plugin_y".
# plugin_load

# MySQL server's plugin configuration.
# loose_mysqlx_port=33060
 

I make a changes to boost the database  but i think i can boost it more, anyone know something about that ? Thank you

Also i have this dedicated server 

Intel i7-6700K OC

4 Cores / 8 Threads

4.4 GHz / 4.7 GHz

64 GB DDR4 2400 MHz

2 x 480 GB SSD 

Edited January 30, 2017 by mfg_1984

[Tryskell]

MySqlTuner and "mysql tuning" on google.

 

Edit : max_connections=2000, really ?

Edited January 30, 2017 by Tryskell

[mfg_1984]

How much i must put on  max_connections=          dude ? 

[mfg_1984]

No one ?

[Flash™]

Configuring MySQL on Linux

 

test 

[client]
port            = 3306
socket          = /var/run/mysqld/mysqld.sock
default-character-set   = utf8
[mysqld_safe]
socket          = /var/run/mysqld/mysqld.sock
nice            = -5
[mysqld]
user            = mysql
pid-file        = /var/run/mysqld/mysqld.pid
socket          = /var/run/mysqld/mysqld.sock
port            = 3306
basedir         = /usr
datadir         = /var/lib/mysql
tmpdir          = /tmp
lc-messages-dir = /usr/share/mysql
innodb_flush_log_at_trx_commit = 2
#default-character-set  = utf8
character-set-server    = utf8
skip-external-locking
bind-address = 0.0.0.0
 
 
#
 
# * Fine Tuning
 
#
 
key_buffer              = 512M
 
max_allowed_packet      = 16M
 
thread_stack            = 24M
 
thread_cache_size       = 8
myisam-recover         = BACKUP
# max_connections        = 4096
#table_cache            = 4096
thread_concurrency     = 6
#
# * Query Cache Configuration
#
query_cache_limit       = 256M
query_cache_size        = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
 
# Be aware that this log type is a performance killer.
 
# As of 5.1 you can enable the log at runtime!
#general_log_file        = /var/log/mysql/mysql.log
#general_log             = 1
#
# Error log - should be very few entries.
#
log_error = /var/log/mysql/error.log
#
# Here you can see queries with especially long duration
#log_slow_queries       = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
 
#
 
# The following can be used as easy to replay backup logs or for replication.
 
# note: if you are setting up a replication slave, see README.Debian about
 
#       other settings you may need to change.
 
#server-id              = 1
 
#log_bin                        = /var/log/mysql/mysql-bin.log
 
expire_logs_days        = 10
 
max_binlog_size         = 100M
 
#binlog_do_db           = include_database_name
 
#binlog_ignore_db       = include_database_name
 
#
 
# * InnoDB
 
#
innodb_file_per_table
innodb_additional_mem_pool_size = 256M
innodb_buffer_pool_size = 1024M
innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_buffer_size = 8M
#innodb_log_file_size = 25M
#innodb_log_files_in_group = 3
innodb_thread_concurrency = 12
innodb_flush_method = O_DSYNC
innodb_table_locks = 0
innodb_flush_log_at_trx_commit = 0
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
#big-tables
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
 
# Read the manual for more InnoDB related options. There are many!
 
#
 
# * Security Features
 
#
 
# Read the manual, too, if you want chroot!
 
# chroot = /var/lib/mysql/
 
#
 
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
 
#
 
# ssl-ca=/etc/mysql/cacert.pem
 
# ssl-cert=/etc/mysql/server-cert.pem
 
# ssl-key=/etc/mysql/server-key.pem
 
 
 
 
[mysqldump]
 
quick
 
quote-names
 
max_allowed_packet      = 128M
 
 
 
[mysql]
 
#no-auto-rehash # faster start of mysql but no tab completition
 
 
 
[isamchk]
 
key_buffer             = 64M
 
 
#
 
# * IMPORTANT: Additional settings that can override those from this file!
 
#   The files must end with '.cnf', otherwise they'll be ignored.
 
#
!includedir /etc/mysql/conf.d/
 
 

Edited February 2, 2017 by Flash™

[mfg_1984]

 

Configuring MySQL on Linux

 

test 

[client]
port            = 3306
socket          = /var/run/mysqld/mysqld.sock
default-character-set   = utf8
[mysqld_safe]
socket          = /var/run/mysqld/mysqld.sock
nice            = -5
[mysqld]
user            = mysql
pid-file        = /var/run/mysqld/mysqld.pid
socket          = /var/run/mysqld/mysqld.sock
port            = 3306
basedir         = /usr
datadir         = /var/lib/mysql
tmpdir          = /tmp
lc-messages-dir = /usr/share/mysql
innodb_flush_log_at_trx_commit = 2
#default-character-set  = utf8
character-set-server    = utf8
skip-external-locking
bind-address = 0.0.0.0
 
 
#
 
# * Fine Tuning
 
#
 
key_buffer              = 512M
 
max_allowed_packet      = 16M
 
thread_stack            = 24M
 
thread_cache_size       = 8
myisam-recover         = BACKUP
# max_connections        = 4096
#table_cache            = 4096
thread_concurrency     = 6
#
# * Query Cache Configuration
#
query_cache_limit       = 256M
query_cache_size        = 16M
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
 
# Be aware that this log type is a performance killer.
 
# As of 5.1 you can enable the log at runtime!
#general_log_file        = /var/log/mysql/mysql.log
#general_log             = 1
#
# Error log - should be very few entries.
#
log_error = /var/log/mysql/error.log
#
# Here you can see queries with especially long duration
#log_slow_queries       = /var/log/mysql/mysql-slow.log
#long_query_time = 2
#log-queries-not-using-indexes
 
#
 
# The following can be used as easy to replay backup logs or for replication.
 
# note: if you are setting up a replication slave, see README.Debian about
 
#       other settings you may need to change.
 
#server-id              = 1
 
#log_bin                        = /var/log/mysql/mysql-bin.log
 
expire_logs_days        = 10
 
max_binlog_size         = 100M
 
#binlog_do_db           = include_database_name
 
#binlog_ignore_db       = include_database_name
 
#
 
# * InnoDB
 
#
innodb_file_per_table
innodb_additional_mem_pool_size = 256M
innodb_buffer_pool_size = 1024M
innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_buffer_size = 8M
#innodb_log_file_size = 25M
#innodb_log_files_in_group = 3
innodb_thread_concurrency = 12
innodb_flush_method = O_DSYNC
innodb_table_locks = 0
innodb_flush_log_at_trx_commit = 0
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
#big-tables
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
 
# Read the manual for more InnoDB related options. There are many!
 
#
 
# * Security Features
 
#
 
# Read the manual, too, if you want chroot!
 
# chroot = /var/lib/mysql/
 
#
 
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
 
#
 
# ssl-ca=/etc/mysql/cacert.pem
 
# ssl-cert=/etc/mysql/server-cert.pem
 
# ssl-key=/etc/mysql/server-key.pem
 
 
 
 
[mysqldump]
 
quick
 
quote-names
 
max_allowed_packet      = 128M
 
 
 
[mysql]
 
#no-auto-rehash # faster start of mysql but no tab completition
 
 
 
[isamchk]
 
key_buffer             = 64M
 
 
#
 
# * IMPORTANT: Additional settings that can override those from this file!
 
#   The files must end with '.cnf', otherwise they'll be ignored.
 
#
!includedir /etc/mysql/conf.d/
 
 

Thank you for your interest bro ! :)