Help Προβλημα Με Ta Port Σε Router Zte H108Ns

[morpheus32]

paidia kalhspera xreiazome bohtheia epigontos alaksa royter kai etairia internet prosorina moy dwsan ena router ZTE H108NS enw anoigw ta port den trexei o server online mhpws mpwrei kapoios na vohthisei? toys phra thl kai moy eipan gia mia selida alla den vgazw akri opoidipote help euprosdekto  eyxaristw    etairia ote

[Dante44®]

http://portforward.com/english/routers/port_forwarding/ZTE/ZXHN_H208N/Lineage_II.htm

 

 

The Default ZTE ZXHN_H208N Router Username is: admin The Default ZTE ZXHN_H208N Router Password is: admin

 

 

Click the Application link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

 

.

Forward Ports 80 on the ZTE ZXHN_H208N

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lineage II requires you to forward the TCP(80,2106,2009,7777) and UDP(53) ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port
 

 

 

Forward Ports 2106 on the ZTE ZXHN_H208N

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add

 

 

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port

 

 

 

 

 

 

Forward Ports 7777 on the ZTE ZXHN_H208N

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

 

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port

 

 

 

[morpheus32]

 

http://portforward.com/english/routers/port_forwarding/ZTE/ZXHN_H208N/Lineage_II.htm

 

 

The Default ZTE ZXHN_H208N Router Username is: admin The Default ZTE ZXHN_H208N Router Password is: admin

 

 

Click the Application link near the left of the page.

You should now see a new menu. In this new menu, click Port Forwarding.

 

.

Forward Ports 80 on the ZTE ZXHN_H208N

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Lineage II requires you to forward the TCP(80,2106,2009,7777) and UDP(53) ports. Go ahead and enter the settings shown above into the Port Forwarding menu and then click Add.

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port

 

 

 

Forward Ports 2106 on the ZTE ZXHN_H208N

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add

 

 

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port

 

 

 

 

 

 

Forward Ports 7777 on the ZTE ZXHN_H208N

You should see another page of settings that need to be entered into one of the blank lines on your routers Port Forwarding page. Go ahead and enter those settings and then click Add.

 

Enable   Name Protocol TCPUDP WAN Host Start IP Address WAN Host End IP Address WAN Connection WAN Start Port WAN End Port Enable MAC Mapping LAN Host IP Address LAN Host Start Port LAN Host End Port

 

 

 

Thanks so much for your time but I have router ZTE H108NS  echs build their port but nothing....:(