Jump to content
  • 0

[HELP]Navicat problem


Question

Posted

Katarxas kalhspera.Exw 2 meros opou eftia enan server interlude kai uparxei ena problima den borw na kanw install ta npc giath to navicat m vgazei error otan prospathw na to kanw.Mporei kaneis na me voithisei?

Recommended Posts

  • 0
Posted

[Err] 1136 - Column count doesn't match value count at row 1

[Err] INSERT INTO `custom_npc` VALUES (67223,30080,'= Global Gatekeeper =',1,'StinkyMadness',1,'NPC.a_teleporter_FHuman',8.00,25.00,70,'female','L2Teleporter',40,3862,1493,11.85,2.78,40,43,30,21,20,10,0,0,1314,470,780,382,278,0,333,0,0,0,55,132,NULL,0,1,0,'LAST_HIT');

[Msg] Finished - Unsuccessfully

--------------------------------------------------

 

  • 0
Posted

[Err] 1136 - Column count doesn't match value count at row 1

[Err] INSERT INTO `custom_npc` VALUES (67223,30080,'= Global Gatekeeper =',1,'StinkyMadness',1,'NPC.a_teleporter_FHuman',8.00,25.00,70,'female','L2Teleporter',40,3862,1493,11.85,2.78,40,43,30,21,20,10,0,0,1314,470,780,382,278,0,333,0,0,0,55,132,NULL,0,1,0,'LAST_HIT');

[Msg] Finished - Unsuccessfully

--------------------------------------------------

 

peraseto xeirokinita...profanos to npc pou vazeis to eixan ftia3ei panw se alo pack
  • 0
Posted

Oxi to npc einai gia interlude kai epidi eimai new ti enweis xeironaktika?

άνοιξε το sql του Npc(gk),και άνοιξε και το npc.sql(στην db σου).

 

όταν ανοίξεις το npc.sql κάτω κάτω έχει ένα συν(+) το πατάς και σου δημιουργεί ένα καινούργιο κουτάκι.

το συμπληρώνεις σιγά-σιγά σύμφωνα με τα στοιχεία του npc(της gk απο ότι βλέπω)

 

αν δεν καταλάβες,υπάρχει ένας οδηγος εάν θυμάμαι καλά στο φόρουμ,ψάξε τον.

  • 0
Posted

nai alla pos ginetai na anoiksw to sql ths gk ?

αυτό που κατέβασες ρε(το .txt αρχείο) της gatekeeper..

που είναι μέσα στον φάκελο data/sql(επαναλαμβάνω είναι αυτά που κατέβασες,τα αρχείο της gk)

  • 0
Posted

Lathos section eisai. Read before posting. ELEOS pia!

Kai esi me afto to Comment ton help na ta diavasei?

min skotoneste gia ta Post... pos kanete etc oloi na mazepsete post..? ilikrina..

t3r0 kaneme add skype... Name: StinkyMadness

Guest
This topic is now closed to further replies.


  • Posts

    • <dailyReward days="28" autoOpen="true" minimumOnlineTimeSeconds="30" oneRewardPerIP="true" resetIfMissDay="true">   For now, I have these settings in the XML—this is the V1 version I created, though I plan to make further improvements over time. Of course, I’ll also add more protections—MAC, HWID, and perhaps others like account-based restrictions—to make it more secure. We can also implement non-tradable items to further enhance the system's security. I’ll keep posting updates and refining both the system and the interface. I might make a video tomorrow; if you look at the top, you'll see the "auto-open" feature can be toggled on or off, allowing users to rely solely on the `.daily` command. Cheers! Note: If I sell it in this state, I’ll provide support and roll out updates to users. I’m not forcing anyone to buy anything; I’d even provide the patch files so that anyone with the necessary skills can add features, modify it, or improve it further.
    • If the problem is that the target is lost, the action of aiming at another character, upon losing collision, does not allow aiming.   This one works as it should, allowing you to target characters
    • MICROTEXT AND WATERMARKS BREAK MOST RENDERINGS Microtext and watermarks aren’t just small decorative details. They are one of the most common reasons a document fails verification, even when it looks decent at first glance. The issue is that these elements are almost impossible to reproduce “by eye.” Microtext requires precise geometry and legibility at a very small size, while a watermark needs the correct density, transparency, and accurate placement relative to other security features. Any deviation becomes obvious during detailed inspection. ▪ What’s most often done wrong: - microtext is drawn too thick or blurry - the watermark is made either too visible or almost invisible - the positioning between microtext and watermark is ignored - the original printing technology isn’t taken into account when choosing density and shape - The stronger the document’s security features, the less room there is for approximation. What matters here isn’t visual similarity, but accurate reproduction of the original technical characteristics. If your document contains microtext and watermarks, this is always an area that requires extra attention. Write to us in DMs. We’ll review your case and point out exactly which details need the highest precision during rendering. › TG: @mustang_service_ms ( https:// t.me/ mustang_service_ms ) › Channel: Mustang Service ( https:// t.me/ +JPpJCETg-xM1NjNl ) #drawing #microtext #photoshop #editing #watermarks
    • GoldRush launches tomorrow! July 18 16:00 GMT+3 Europe / International Register your account in the website, connect wallet and be ready to dominate!
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..