Kararxas gia sas!Exw ena kanh ena freya server kai shmera ton anevase se eteria alla den thhmame pou preph valo thn ip kai pou an valw sths sta8erh ip tou pc gia na anh3oune ta port apoth 8hmame sto palio mou server pou ixa palh se eteria 8hmae oti evala sto alla den 8hmame pia evala kai pou thn evalse se auta ta 3
Server.properties
ipconfig.xml
loginserver.properties
Opios borh as pou ph pou an valo thn IP kai sthn sta8erh IP tou hpologisth!
loginserver.properties
# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# Bind ip of the LoginServer, use * to bind on all available IPs
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: * (0.0.0.0)
LoginserverHostname = *
# Default: 2106
LoginserverPort = 2106
# The address on which login will listen for GameServers, use * to bind on all available IPs
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: * (0.0.0.0)
LoginHostname = *
# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014
# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Default: True
LogLoginController = True
# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 10
LoginTryBeforeBan = 10
# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 600 (10 minutes)
LoginBlockAfterBan = 600
# If set to True any GameServer can register on your login's free slots
# Default: False
AcceptNewGameServer = False
# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True
# Default: 15
FastConnectionLimit = 15
# Default: 700
NormalConnectionTime = 700
# Default: 350
FastConnectionTime = 350
# Default: 50
MaxConnectionPerIP = 50
# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jls (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jls
# URL = jdbc:sqlserver://localhost/database = l2jls/user = sa/password =
URL = jdbc:mysql://localhost/l2jls
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password =
# Default: 10
MaximumDbConnections = 10
# Default: 0
MaximumDbIdleTime = 0
# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True
# Default: True
AutoCreateAccounts = True
# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False
ipconfig.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- Externalhost here (Internet IP) or Localhost IP for local test -->
<gameserver address="127.0.0.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ipconfig.xsd">
<!-- Localhost here -->
<define subnet="127.0.0.0/8" address="127.0.0.1" />
<!-- Internalhosts here (LANs IPs) -->
<define subnet="10.0.0.0/8" address="10.0.0.0" />
<define subnet="172.16.0.0/19" address="172.16.0.0" />
<define subnet="192.168.0.0/16" address="192.168.0.0" />
</gameserver>
Server.properties
# ---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# Where's the Login server this gameserver should connect to
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: 127.0.0.1
LoginHost = 127.0.0.1
# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014
# Bind address for gameserver. You should not need to change it in most cases.
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: * (0.0.0.0)
GameserverHostname = *
# Default: 7777
GameserverPort = 7777
# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2jgs (default)
# URL = jdbc:hsqldb:hsql://localhost/l2jgs
# URL = jdbc:sqlserver://localhost/database = l2jgs/user = sa/password =
URL = jdbc:mysql://localhost/l2jgs
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password =
# Default: 100
MaximumDbConnections = 100
# Default: 0
MaximumDbIdleTime = 0
# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1
# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True
# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
#DatapackRoot = C:/Work/tmp/DataPack
# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100
# Numbers of protocol revisions that server allows to connect.
# Delimiter is ;
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 216
AllowedProtocolRevisions = 216
# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------
# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*
# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*
# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7
The server is running in l2house.com.ar with C4 mode and in L2Tekila within the same login you can also test it in C5, if you want me to raise another chronicle to test, just let me know.
I have a system where Accounts are saved on login screen for fast login. I am playing a server where this feature is not on the logic screen. How I can try to add this feature to the system?
I don't know what files I would have to touch.
Thanks!!
Question
MixHarder
Kararxas gia sas!Exw ena kanh ena freya server kai shmera ton anevase se eteria alla den thhmame pou preph valo thn ip kai pou an valw sths sta8erh ip tou pc gia na anh3oune ta port apoth 8hmame sto palio mou server pou ixa palh se eteria 8hmae oti evala sto alla den 8hmame pia evala kai pou thn evalse se auta ta 3
Server.properties
ipconfig.xml
loginserver.properties
Opios borh as pou ph pou an valo thn IP kai sthn sta8erh IP tou hpologisth!
loginserver.properties
ipconfig.xml
Server.properties
6 answers to this question
Recommended Posts