Jump to content

How To Stream


Dask

Recommended Posts

Well some guys ask me how I can stream, what options I need etc

 

So I decide to make a guide

 

1)Go to http://www.own3d.tv/ and make an Account.

 

2)Then go to https://www.xsplit.com/own3d/SignUp/ download Xsplit and Register too.

 

3)Open Xsplit and log in with your Xsplit account.

 

4)Go to

 

File>Add Screen Region. Click on top left of the screen it will automatically select your whole screen.

 

5)Go to

 

View>Resolution>1280 x 720 (16:9) - HDTV (video)

 

View>Frame Rate>30.00 FPS

 

View>Transition>Fade

 

View>Transition Speed> 300 ms

 

6)Broadcasting with XSplit Broadcaster.

 

1. Adding own3D Channel

 

    Go to Broadcast -> Edit Channels

    On the right side click "Add" -> "own3D"

    Username – your own3D username

    Password – your own3D password

    Quality – set quality to 6. Do not set quality 9-10 at high resolutions.

    Max Bitrate – select the maximum video bitrate you want to stream with, we do not recommend the maximum bitrate to be higher than 1500kbps.

    Buffer size – do not change this.

    Resolution – set it to "Default Mixer Resolution"

    Audio Encoding – we recommend 44.100 KHz Stereo with MP3 codec.

 

 

My settings are like this

 

sABNN.jpg

 

 

Changing the VBV Max Bitrate (kbps) and VBV Buffer (kbit) is for the Quality of your Stream and it depends from your Upload Speed.

 

I Use 600 with 300 with 0.80/0.90 Mbps Upload. Sometimes I use 650/300 but it lags a lot so the 600/300 has a nice result.

 

The own3d TV Guide suggest you these options

 

Settings Examples:

 

The high-end PC – Warp 3 in HD

 

  CPU: fast Quad Core like 4×3,2gHz or even better

    RAM: 4+ Gig RAM

    Bandwidth: Upload 2000+ Kbit/sec

    In “tools -> settings -> channels -> edit” you want to have this:

 

image0.png

 

 

In the “View->Resolution” tab you want to have resolution: 1280×720 (16:9) – HDTV (video)

 

image1.png

frame rate: 25fps

 

The mid range PC – the standard gamer

  CPU: fast Duo core like Intel i5 2×3.2gHz or even a cheaper quad core like 4×2.2gHz

    RAM: 4+ Gig RAM

    Bandwidth: Upload 1200+ Kbit/sec

    In “tools -> settings -> channels -> edit” you want to have this:

image2.png

 

In the “View” tab you want to have

Resolution: 900×600 (16:10) or 1088x612 (16:9)

Frame rate: 20fps or 25fps

 

 

The slow-mo PC

 

    CPU: standard Duo Core like Athlon X2 2×2.7gHz

    RAM: 2+ Gig RAM

    Bandwith: around 500 kbit/sec

   

Owned Tv Notice:You see, if you are no hardware junkie, you will almost always be rated to have a slow-mo PC. If you just have a slow internet connection and a mid range PC, we won’t have any problems to find a good setup for you, but it is possible to be unable to stream with a slow-mo PC at all. Note that laptop PCs have different CPU. They are almost always way slower than desktop CPUs to have a better power efficiency.

 

  In “Tools -> Settings -> Channels -> Edit” you want to have this:

image3.png

 

In the “View” tab you want to have

resolution: 640×360 (16:9)

frame rate: 20fps or 15fps

 

 

 

When you finish with your options, go to Broadcast>Select your Channel, for example OWN3D - DASK1, open your browser, go to search and CTRL+V or right click>Paste to take your Stream Link.

 

 

Hope it helped you.

 

 

 

 

 

Link to comment
Share on other sites

You don't see the difference between 60 and 30 fps ? LOL :D

I just can't play with below 40fps... i get headace ][_{[]}][_

That means I'll never stream unless i get new pc 8)

Link to comment
Share on other sites

You don't see the difference between 60 and 30 fps ? LOL :D

I just can't play with below 40fps... i get headace ][_{[]}][_

That means I'll never stream unless i get new pc 8)

how I can explain you

 

[GR] "Εικονικά" έχεις 30 fps αν πχ παίζεις με 60, η διαφορά είναι ελάχιστη. Και έπειτα δεν παίζεις με 30. Παίζεις με 30-45 και πιάνεις και 60. Στην ουσία τρώει 5 με 10 fps.

 

Sorry for greek, who stickied that? :D

Link to comment
Share on other sites

Btw do you know how to record with fraps and not getting 1gb per 1min or recording ? ;//

 

After you finished the record you can compress the file .

Link to comment
Share on other sites

Btw do you know how to record with fraps and not getting 1gb per 1min or recording ? ;//

You can't, but you can use for example LoL Replay then capture it with Fraps and you can make it in normal size with a program. Easy x264 or smth like that I think.
Link to comment
Share on other sites

After you finished the record you can compress the file .

Well, you don't need a "rocket" pc for a HD Stream, you need big upload. My PC costs about 450-500 euros, but I don't have big upload speed, so my Stream Quality is about 360 or 480p I think.
Link to comment
Share on other sites

Well, you don't need a "rocket" pc for a HD Stream, you need big upload. My PC costs about 450-500 euros, but I don't have big upload speed, so my Stream Quality is about 360 or 480p I think.

 

Prolly 360 :) well when i bought my pc it costed around 750E and my dl/up speed are just great.

 

 

Link to comment
Share on other sites

Prolly 360 :) well when i bought my pc it costed around 750E and my dl/up speed are just great.

 

 

Well I have 0.70-0.90 mbps upload. I guess with your PC and your upload speed you can easy stream in HD. Test it, nothing to lose :D
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Posts

    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
    • or at least to tell you an update that sorry but still not at home.. 10 days is suspisious.. but he is long time offline from discord indeed... maybe something happened?
    • I never had problems with him. Again, Im not sure if he scammed or not. But 10+ days without answering after we already paid, its a bit sus. If you know you wouldnt be able to answer for a few days, after receiving and confirming the amount, why dont keep in touch? or just say "hey, dont send now because I will only be available after day x.".  
    • i used to ask him for stuff etc, i dont think he scammed ... if he does i will be suprised...
  • Topics

×
×
  • Create New...