Jump to content
  • 0

(Help) Server IP Config


Question

Posted

The server dont run when i confing him with no-ip.

This is wath i config:

 

server.properties

 

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

#

# Note: External/Internal address definitions was moved to the ipconfig.xml

#

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = my no-ip

 

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

 

# Bind address for gameserver. You should not need to change it in most cases.

# Default: * (0.0.0.0)

GameserverHostname = my no-ip

 

# Default: 7777

GameserverPort = 7777

 

login.properties

 

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = my no-ip

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = my no-ip

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

 

ipconfig.xml

 

<?xml version="1.0" encoding="UTF-8"?>

<!-- Put old contents of ExternalHostname here, used by default -->

<gameserver address="my no-ip">

<!-- Localhost access -->

<define subnet="127.0.0.0/8" address="my no-ip" />

<!-- LAN's, put old contents of InternalHostname here -->

<define subnet="10.0.0.0/8" address="my no-ip" />

<define subnet="172.16.0.0/19" address="my no-ip" />

<define subnet="192.168.0.0/16" address="my no-ip" />

</gameserver>

 

93487270.jpg

 

 

any1 know wath i have to do?

plz help :(

8 answers to this question

Recommended Posts

  • 0
Posted

What you've made is absolutely wrong.

 

Leave your .properties as default (*) and edit only ipconfig.xml

<?xml version="1.0" encoding="UTF-8"?>
<!-- Put old contents of ExternalHostname here, used by default -->
<gameserver address="YOUR NO-IP">
   <!-- Localhost access -->
   <define subnet="127.0.0.0/8" address="my 127.0.0.1" />
   <!-- LAN's, put old contents of InternalHostname here -->
   <define subnet="10.0.0.0/8" address="LEAVE AS DEFAULT" />
   <define subnet="172.16.0.0/19" address="LEAVE AS DEFAULT" />
   <define subnet="192.168.0.0/16" address="YOUR LOCAL IP (EX. 192.168.1.101) (type ipconfig in cmd)" />
</gameserver>

  • 0
Posted

Problem solved...i think :)

 

i change just this:

 

in ipconfig.xml i change just this gameserver address="my no-ip"

and i didnt change l2.ini with my no-ip , i let 127.0.0.1

and i add in host file "my no-ip     l2testauthd.lineage2.com"

and now i can login without problems..

thx guis :)

  • 0
Posted

l2testauthd.lineage2.com is using when your client is a test one.

Its just because your hosts file depends on your l2.ini.

IF you change l2.ini with an IP, not l2authd.lineage2.com, hosts file is useless.

  • 0
Posted

Problem solved...i think :)

 

i change just this:

 

in ipconfig.xml i change just this gameserver address="my no-ip"

and i didnt change l2.ini with my no-ip , i let 127.0.0.1

and i add in host file "my no-ip    l2testauthd.lineage2.com"

and now i can login without problems..

thx guis :)

locked.
Guest
This topic is now closed to further replies.


×
×
  • Create New...

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock