Jump to content

[Guide]Τι είναι το Pawnviewer; Πώς θα το χρησιμοποιήσω;


Recommended Posts

Γειά σας MaxCheaters! Αποφάσισα να κάνω τον πρώτο μου οδηγό! Και γραμμένο στα ελληνικά για το περίφημο "Pawnviewer". Δεν μπόρεσα να βρω κάτι αντίστοιχο γιαυτό και κάνω αυτόν τον οδηγό.

Λοιπόν επειδή όπως λέμε και εμείς οι Έλληνες τα πολλά λόγια είναι φτώχεια ας αρχίσουμε!

 

Ερ.: Τι είναι το "Pawnviewer";

Απ.: Το Pawnviewer είναι μια εφαρμογή που σας επιτρέπει να δείτε ότι υπάρχει μέσα στον φάκελο του Linegae II σας χωρίς να κάνετε Log In σε κάποιον Server.

Ερ.: Για να δω ότι υπάρχει μέσα στον φάκελο πρέπει να περάσω όλα τα αρχεία για να δω κάτι μέσο Pawnviewer;

Απ.: Αρκεί μόνο να περάσουμε τα textures/systextures και τα itemname-e/weapongrp/armorgrp/skillname-e κ.λ.π.

 

Πρώτα απ' όλα πρέπει να κατεβάσουμε αυτό εδώ το αρχείο από τα παρακάτω links που σας δίνω.

 

1ο. Download with --> Mediafire

 

2o. Download with  --> 4Shared

 

3ο. Download with --> Rapidshare

 

Τώρα ας δούμε τι θα κάνουμε το αρχείο που μόλις κατεβάσαμε.

 

Βήμα 1: Κάνουμε αποσυμπίεση το αρχείο

aposimpiesh.jpg

 

Βήμα 2: Κάνουμε αντιγραφή το αρχείο με όνομα System και επικόλληση στον φάκελο του Lineage II που έχουμε π.χ. (C:\Program Files\Lineage II)

antigrafh.jpgepikolish.jpg

 

Βήμα 3: Αφού τελειώσει η αντιγραφή του φακέλου τότε πηγαίνουμε κai ανοίγουμε τον φάκελο system και βρίσκουμε το αρχείο-συντόμευση με όνομα "Taster!" και κάνουμε δεξί κλικ και ιδιότητες εκεί που λέει "Προορισμός" γράφουμε αυτό "C:\Program Files\Lineage II\system\L2.exe" -INI=testl2.ini (ανάλογα με το όνομα που έχετε δώσει στον φάκελο με το client σας το δίνετε και εδώ.) και εκεί που λέει "Εκκίνηση από:" βάζουμε αυτό "C:\Program Files\Lineage II\system" (επίσης και εδώ βάζουμε το όνομα που έχουμε δώσει στον φάκελο του client μας εάν το έχουμε αλλάξει.)

tasteridiotites2.jpg

 

Βήμα 4: Τρέξτε το Taster! και περιμένετε να ανοίξει. Αφού ανοίξει πατήστε το πλήκτρο "Tab" (δεν θα φανεί να ανοίγει τίποτα) και απλά πατήστε μία από τις τρεις επιλογές που έχετε και πατήστε Enter. π.χ. tab μετά πατήστε pv και τέλος enter.

                                  1η επιλογή: PV (με αυτή την εντολή μπορείτε να δείτε όλα τα items που υπάρχουν στον server weapons/armors etc.

                                  2η επιλογή: SV (με αυτή την εντολή μπορείτε να δείτε όλα τα skills που υπάρχουν στον server)

                                  3η επιλογή: NV (με αυτή την εντολή μπορείτε να δείτε όλα τα npc του server παίρνοντας την μορφή του καθενός)

 

[glow=red,2,300]Συμβουλή 1:[/glow] Για καλύτερα μπορείτε να βάλετε ένα client μόνο για να κάνετε ότι θέλετε με το Pawnviewer ώστε να έχετε αυτό το client για το Pawnviewer και να του βάζετε εκεί μέσα ότι θέλετε και απλά να βλέπετε τα weapons/armors και ένα άλλο το οποίο θα είναι το καθαρό σας για να μην έχετε errors και έτσι επειδή το Pawnviewer χρησιμοποιεί το L2.exe οπότε δεν μπορείτε να παίξετε σε κάποιον server με αυτό το client.

[glow=red,2,300]Συμβουλή 2:[/glow] Για να βλέπετε 100% ότι περνάτε μέσα στο client θα πρέπει τα αρχεία που κατεβάζετε και έχουν μέσα ένα .txt αρχείο να περνάτε ότι σας λέει μέσο FileEdit.

Download FileEdit για ότι client θέλετε υπάρχουν όλα παρακάτω:

Chronicle 4 + 5 Download Here!

Interlude Download Here!

Kamael + Hellbound Download Here!

Gracia Part 1 + 2 Download Here!

Gracia Final Download Here!

Gracia Epilogue Download Here!

 

Ο οδηγός είναι δικός μου και τον έκανα γιατί εγώ μέχρι να βρώ πως μπορώ να χρησιμοποιήσω το "Pawnviewer" περίμενα να κάνει κάποιος post το επόμενο βήμα στο Dev Help Section..

Άρα Credits σε: Όσους έκαναν post κάποιο βήμα, και σε εμένα που έκανα το Guide!

 

Για τυχόν απορίες και λοιπά post εδώ!

Link to comment
Share on other sites

an katalaba kitaei ti items exei mesa sta arxeis tou system an einai na kanoume ollo afto kitame kai me fileedit ektos kai an den katalaba kala ;) pioefkolo na logareis na deis para na kaneis ollo afto :)

Link to comment
Share on other sites

oxi mono afto kai den einai tpt diskolo na to kaneis sas ta dino ola! me afto kapios pou kanei mia armor h ena weapon mporei na dei ti exei dimiourgisei xoris na exei sikosei server oste na kanei log in.. aplos peranei ta files (textures/systextures kai ta itemname-e klp.) tou mesa sto client kai blepei ti exei kanei!

Link to comment
Share on other sites

Nomizw exei 3anaginei share --> PawnViewer (leei gia gracia alla kanei gia ola ta client...) den 3erw an  metraei

(kai me fotos)

 

ps: kai edw eixa apantisei o dios se 1 request gia to Pawnviewr...

 

 

Tespa  kali doulia pou ta mazepses ola oson afora to Pawnviewer se 1 topic..Nice

 

Edit: oriste mia foto gia na katalabete peripou ti einai :

 

shot00005r.png

 

Link to comment
Share on other sites

[NoX*ShiNe" post=1087903" timestamp="1275335265]

Πολυ καλο το guide σου αν εφτιαχνες και λιγο την pic σου θα ηταν τελειο και θα ειχες +1 απο εμενα!

pia pic mou prepei na ftiaxo?

Link to comment
Share on other sites

pia pic mou prepei na ftiaxo?

Εννοω να φτιαξεις λιγο τις εικονες να μην φενεται το pc σου απο πισω γιανα ειναι ποιο ομορφο για δικο σου καλο το λεω!
Link to comment
Share on other sites

[NoX*ShiNe" post=1087903" timestamp="1275335265]

Πολυ καλο το guide σου αν εφτιαχνες και λιγο την pic σου θα ηταν τελειο και θα ειχες +1 απο εμενα!

Αξίζει αυτό το πράγμα +1 karma?


 

Καλο το guide σου αλλα πιστεύω πως είναι ήδη στο Client Modding..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Posts

    • Thank you 😊👍 working great! 
    • MidnightSell team WTB/WTS GOLD TWW EU/US all servers Cataclysm all servers Payment Visa/Master/Btc/Eth/Trc-20/Erc-20 (all payments within 10 min) For all question pls dm Discord https://discord.gg/h8AN57qJjK Or Telegram @MidnightSell
    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
  • Topics

×
×
  • Create New...