Jump to content
  • 0

8elw help ...!!!


Question

Posted

paides exw ena problem...!!!

Prospa8w edw kai kairo na sikoso enan l2j server kai kolousa se mlkies oloi tin wra...!!!dld se leptomeries...!!!pano kato ta ebriska meta alla twra den kserw gt m to kanei afto to prama kai 8elw ligo help ama kserei kaneis gt to kanei afto kai mporei na m help...!!!

 

me leei otan fortoni to me bgazei ena problem kai m leei oti      Connecting to login on 127.0.0.1:2106

                                                                                                Incorrect packet checksum, ignoring packet (LS)

 

 

kai den mporw na brw pou einai to problem...!! :/

 

kserei kaneis??

 

plzzzz.........!!!!!!!

 

Recommended Posts

  • 0
Posted

Exeis lathos ta configs. Kane paste edw ta configs sou na sta ftiaxw . [ gameserver/config/server.properties , loginserver/config/loginserver.properties ]

  • 0
Posted

gameserver/config/server.properties

 

 

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

ExternalHostname = 79.103.76.143

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# If this IP is resolvable by the Login Server, just leave *.

# ---------------------------------------------------------------------------

# Default: *

InternalHostname = 127.0.0.1

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1

 

# TCP port the login server listen to for gameserver connection requests

# Default: 2106

LoginPort = 2106

 

# Default: *

GameserverHostname = *

 

# Default: 7777

GameserverPort = 7777

 

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

 

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =

URL = jdbc:mysql://localhost/l2jdb

 

# Database user info (default is "root" but it's not recommended)

Login = root

 

# Database connection password

Password = s0k1n

 

# Default: 100

MaximumDbConnections = 10

 

# Default: 0

MaximumDbIdleTime = 0

 

# ---------------------------------------------------------------------------

# Misc Server Settings

# ---------------------------------------------------------------------------

# This is the server ID that the Game Server will request.

# Example: 1 = Bartz

# Default: 1

RequestServerID = 1

 

# True = The Login Server will give an other ID to the server if the requested ID is already reserved.

# Default: True

AcceptAlternateID = true

 

# Datapack root directory.

# Defaults to current directory from which the server is started unless the below line is uncommented.

#DatapackRoot = C:/Work/tmp/DataPack

 

# Define how many players are allowed to play simultaneously on your server.

# Default: 100

MaximumOnlineUsers = 100

 

# Minimum and maximum protocol revision that server allow to connect.

# Warning: You must make sure that the minimum revision is always less than or equal to the maximum revision.

# Default: 83

MinProtocolRevision = 1

 

# Default: 87

MaxProtocolRevision = 999

 

# ---------------------------------------------------------------------------

# Misc Player Settings

# ---------------------------------------------------------------------------

 

# Character name template.

# Examples:

# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*

# The above setting will allow names with first capital letter, next three small letters,

# and any letter (case insensitive) or number, like OmfgWTF1

# CnameTemplate = [A-Z][a-z]*

# The above setting will allow names only of letters with first one capital, like Omfgwtf

# Default .* (allows any symbol)

CnameTemplate = .*

 

# This setting restricts names players can give to their pets.

# See CnameTemplate for details

PetNameTemplate = .*

 

# Maximum number of characters per account.

# Default: 7 (client limit)

CharMaxNumber = 7

 

 

 

 

 

 

 

 

loginserver/config/loginserver.properties

 

 

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

# This is transmitted to the clients connecting from an external network, so it has to be a public IP or resolvable hostname

# Common settings...

# 127.0.0.1 - If you are playing alone on a test server

# 192.168.x.x - This is if you are on a 192.168.x.x type network (behind a standard consumer router) and want other computers from JUST the internal network to be able to connect

# x.x.x.x - WAN IP obtained from http://www.whatismyip.com/. This is if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

ExternalHostname = 79.103.76.143

 

# ---------------------------------------------------------------------------

# This is transmitted to the client from the same network, so it has to be a local IP or resolvable hostname.

# This can be the internal IP such as 127.0.0.1 or the computer's IP such as 192.168.x.x.

# ---------------------------------------------------------------------------

# Default: 127.0.0.1

InternalHostname = 127.0.0.1

 

# ---------------------------------------------------------------------------

# If you are behind a router which using its own local IP for Port Forwarding then set this to the routers

# local IP if you want people outside your internal network to be able to connect to your server.

# ---------------------------------------------------------------------------

# RouterHostname =

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

 

# ---------------------------------------------------------------------------

# Security

# ---------------------------------------------------------------------------

# Default: True

LogLoginController = true

 

# How many times you can provide an invalid account/pass before the IP gets banned.

# Default: 10

LoginTryBeforeBan = 10

 

# Time you won't be able to login back again after LoginTryBeforeBan tries to login.

# Default: 600 (10 minutes)

LoginBlockAfterBan = 600

 

# If set to True any GameServer can register on your login's free slots

# Default: False

AcceptNewGameServer = false

 

# Enforce GameGuard authorization from client?

# If True, login server will kick client if the client bypassed GameGuard authentication.

# Default: False

ForceGGAuth = false

 

# Flood Protection. All values are in MILISECONDS.

# Default: True

EnableFloodProtection = true

 

# Default: 15

FastConnectionLimit = 15

 

# Default: 700

NormalConnectionTime = 700

 

# Default: 350

FastConnectionTime = 350

 

# Default: 50

MaxConnectionPerIP = 50

 

# ---------------------------------------------------------------------------

# Database

# ---------------------------------------------------------------------------

# Specify the appropriate driver and url for the database you're using.

# Examples:

# Driver = com.mysql.jdbc.Driver (default)

# Driver = org.hsqldb.jdbcDriver

# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver

Driver = com.mysql.jdbc.Driver

 

# Database URL

# URL = jdbc:mysql://localhost/l2jdb (default)

# URL = jdbc:hsqldb:hsql://localhost/l2jdb

# URL = jdbc:sqlserver://localhost/database = l2jdb/user = sa/password =

URL = jdbc:mysql://localhost/l2jdb

 

# Database user info (default is "root" but it's not recommended)

Login = root

 

# Database connection password

Password = s0k1n

 

# Default: 10

MaximumDbConnections = 10

 

# Default: 0

MaximumDbIdleTime = 0

 

# ---------------------------------------------------------------------------

# Misc.

# ---------------------------------------------------------------------------

# If False, the license (after the login) will not be shown.

# Default: True

ShowLicence = true

 

# Default: True

AutoCreateAccounts = true

 

# ---------------------------------------------------------------------------

# Developer Settings

# ---------------------------------------------------------------------------

# Default: False

Debug = false

 

# Default: False

Assert = false

 

# Default: False

Developer = false

  • 0
Posted

den kserw ti allo na kanw...!!!

efxomai na breis to problem gt den kserw ti allo na kanw...!!!  :'(

aganakrisa...!!! :-[

kai thx pou asxolise...!!!  :-\

  • 0
Posted

Ta configs sou gia tis ip's einai mia xara.

 

Ta configs gia tin database sou einai sigoura etsi ? Exeis balei password ? To username einai root ? kai to name tis database einai l2jdb?

  • 0
Posted

ela nai ola htan swsta...!!

ta esbisa ola...

kai to ekana twra opws to ekane enas apo to forum...!!

xwrio pass kai ta lipa ola ta ekana telia kai eginan ola apla sto telos otan mpenw sto para8iro l2.exe me leei twra eror=100 the gameguard is allready running. please try running  it again after rebooting...!!! o gameguard exei problem...!! nomizw to game to interlude m exei problem...!!! nomizw esy pws o blepeis?

  • 0
Posted

Katebase ena gameguard killer , an exeis problima sto gameguard.

 

An kai nomizw pos fteei to client sou . Kalo tha einai na to kaneis re-install.

  • 0
Posted

ok thx file pou asxoli8ikes mazi m... 8a sou pw ama ta kataferw h' oxi ok? thx kai pali...!!

 

Ok . Perimenw gia otidipote problimata/erotiseis exeis. Eksalou gia auto eimaste edw ^^

  • 0
Posted

ela file ta katafera ola...!!!

alla otan paw na mpw sto game kolaei sto log in...!!!

gt...!!??

 

Alakse to min kai to max protocol revision se auta :

 

min = 1

 

max = 999

 

Kai des an exeis sto l2.ini sou tin ip 127.0.0.1

  • 0
Posted

afto to min kai max pou les pou einai aribos to l2.ini to exw swsto den me bgazei error to gameguard...!!!

apla den m bazei sto log in....!!!

  • 0
Posted

afto to min kai max pou les pou einai aribos to l2.ini to exw swsto den me bgazei error to gameguard...!!!

apla den m bazei sto log in....!!!

 

To minprotocolrevision kai to maxprotocolrevision tha ta breis sta configs sou.

 

Gameserver/config/server.properties

 

Alakse ta se 1 kai 999 kai eisai ok.

  • 0
Posted

ta allaksa alla tpt...!!!

pali den mpenei ...!!!

eleos pia...!!

mia leptomeria 8a einai kai den mporw na tin brw...!!

ola kai toso...!!!

eleos pia...!!!!

  • 0
Posted

ta allaksa alla tpt...!!!

pali den mpenei ...!!!

eleos pia...!!

mia leptomeria 8a einai kai den mporw na tin brw...!!

ola kai toso...!!!

eleos pia...!!!!

 

Den sou benei katholou otan bazeis username kai pass h sou benei mexri ekeino to simeio pou dialegeis server?

  • 0
Posted

sto log in menei oute leei oti einai la8os to username h' to pass...!!!

ama eftana ekei pou dialegeis ton server 8a aniga mpokali twra...!!!

stin arxi kolaei...!!!

Guest
This topic is now closed to further replies.

×
×
  • Create New...