Jump to content

[Guide]Complete guide for NO-IP.Server/Web!


Recommended Posts

Hello People! In this guide i will show you how to use No-IP Service - Tested and 100% works

 

------------------------------------------------------------------

 

First of all, we must understand what No-IP Service does! No-IP is a service which gives us the opportunity to create a "link" which actually is our real IP! Using No-IP we can replace our real IP with the "link" we created! This is great cause after a reconnection of our internet connection, we don't have to change our IP in the MU Server Files or in the Webserver Files! We just need to update the No-IP and after that our Servers are ready to start!

 

If you didn't understand a lot now, after the use of No-IP Guide you will see what is going on!

 

OK let's move to the No-IP Website :

 

http://www.no-ip.com/

 

Once you are in the website, you have to register! Create an account and log-in! [The registration is too simple]

 

Now, once you are in your account, on the left side the first category says "Hosts / Redirects"! We are going to create 2 No-IPS! The one will replace our real IP which we are going to use in our Server Files and the other No-IP will replace our IP link for our Server Website! [The Website No-IP will also mask (hide) the real IP]

 

Press Add!

 

Write a Hostname! The Hostname must be short in order to be accepted by the L2 Server Files! A No-IP like myserver1111.servehttp.com is too long and it is not going to work!

 

So you can write something like that : deputa.no-ip.biz [ This is going to work]!

 

As for the host type let it as it is to DNS Host (A)! Now press Create Host and our Server Files No-IP is ready!

 

Now let's create a masked No-IP for our website! Again press Add! Give a hostname! The hostname here can be as long as you want, like : myserverwebsite.servehttp.com

 

As for the Host Type choose "Port 80 Redirect"! Wait 1 second in order the site to be refreshed, and after that you will see a new field called Port! There you have to add the port which from which people will get access to your website! to visit your website! The most common port is 8080!

 

Once you added the port, check the "Mask URL" and Create Host!

 

Now your 2 No-IPS are ready! How to use them?

 

Download the file below : [it is the No-IP Duc 2.2.1 Application which we can use to update the No-IPS when the internet connection reconnects and we can a new IP - When the real IP Changes]

 

DOWNLOAD : Download the application from the official website!

 

Install No-IP Duc [The Installation is too Simple]! After the installation, start the program and write your username and your password [The ones you used in the Website] and log-in! Then you will see the 2 IPS you created earlier!

 

 

 

Now copy the first No-IP we created and paste it everywhere in the MU Server Files! Once you did that, your Server is ready!

 

Copy the second No-IP we create and paste it everywhere in the Website Files!

 

If you did everything i mentioned above, your L2 Server and your Website Server are ready!

 

Credits:systemous,other forum.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...

AdBlock Extension Detected!

Our website is made possible by displaying online advertisements to our members.

Please disable AdBlock browser extension first, to be able to use our community.

I've Disabled AdBlock