Jump to content

Recommended Posts

Posted

Hello everyone!

 

I am posting the tutorial I created for my Forum here in Brazil!

 

From the tutorial L2Walker OGG for servers with Launcher Bake Ice, made some changes to make in connection Profixier on servers Interlude L2OFF not having Launcher Bake Ice!

 

I is not making a mistake in posting this tutorial, I leave the Administrator and Moderators to my post!

 

The Tutorial is in Portuguese, however below is a link already translated it in Google Translate:

 

Tutorial in English

 

DEIXO BEM CLARO QUE FAÇA ISSO POR SUA CONTA E RISCO!!!

 

Este Tutorial foi testado no L2Extreme e no L2Eternal Sin, funcionou 100%!!!

 

Para que possamos iniciar o Tutorial, é necessário baixar alguns programas:

 

OBSERVAÇÃO: Mais abaixo tem o Link de Download do Pacote com: Profixier, l2asrv, L2Fork e o L2Walker OGG 10.7.4!!!

 

Proxifier 2.7 Craked

 

l2asrv051

 

L2Fork

 

Net Framework 3.5: Este você pode fazer o Download clicando AQUI .

 

L2Walker OGG 10.7.4

 

Hosts Editado

 

C5 Toil

 

Compactei todos esse programas, menos o Net Framework 3.5, e upei no MediaFire, abaixo está o LINK para download do arquivo.

 

Download Pacote OGG Interlude

 

Assim que baixar o arquivo, descompacte-o em uma pasta até que apareça todos os programas listados acima.

 

Execute tudo de acordo com o Tutorial, não tente fazer nada a mais do que o descrito aqui.

 

Instale o Microsoft Net Framework 3.5.

 

Instale o Proxyfier 2.7.

 

Agora vamos configurar o Proxifier 2.7, siga a imagem abaixo para efetuar a configuração.

 

zygkdk.jpg

 

1º. Clique na opção Proxy Settings.

 

2º. Em seguida clique em Add.

 

3º. No campo Adress digite o IP 127.0.0.1.

 

4º. No campo Port digite 1999.

 

5º. Em Protocol, marque a opção SOCKS Version 5.

 

6º. Para finalizar esta parte clique em OK.

 

7º. Confira as configurações de acordo com a imagem.

 

8º. Clique em OK para salvar.

 

Agora iremos configurar as regras para funcionamento do Proxy. Siga a imagem abaixo para fazer as próximas configurações.

 

6cff2fs.jpg

 

9º. Agora Clique em Proxification Rules. Na próxima janlea marque a opção Process Only the following + manually proxified.

 

10º. Marque o quadradinho.

 

11º. Agora Clique em remove para excluir a regra já pré configurada pelo aplicativo.

 

12º. Clique em add para adicionar uma nova informação, e logo abrir uma janela igual a imagem abaixo. Em Rule Name coloque o nome que quiser.

 

2sd1s2df1f.jpg

 

13º. Clique em add para adicionar uma aplicação a regra criada. Aparecerá uma tela igual a imagem abaixo.

 

kljjbh1h2.jpg

 

14º. Procure pelo l2.exe dentro da system do l2extreme.us ou l2eternal Sin e selecione ele para ser adicionado a regra.

 

15º. Agora clique em abrir para adicionar à aplicação ao programa.

Logo que executar o passo número 15, aparecerá uma tela igual à imagem abaixo.

 

3211v1.jpg

 

16º. Confira se o nome da tarefa adicionada é l2.exe .

 

Confira se suas configurações ficaram igual da imagem abaixo.

 

yjy21hhjh.jpg

 

23º. No campo Application deverá conter a aplicação pertencente a regra l2.exe .

 

24º. Agora clique em OK para concluir a configuração do Proxifier.

 

Para inciar o profixier vá em: INICIAR> PROGRAMAS>PROFIXIER>Profixier.exe .

 

Se gerar algum erro, vá em INICIAR>PROGRAMAS>PROFIXIER> Network Configurator E CLIQUE EM NEXT->NEXT , DEPOIS FINISH.

 

Ele aparecerá na barra perto do relógio igual mostra a imagem abaixo.

 

52kwsm.jpg

 

ATENÇÃO: LOGO QUE ABRIR O PROFIXIER, PODE SER QUE SUA INTERNET FIQUE LERDA, ISSO OCORRE DEVIDO AO USO DE PROXYS, CASO QUEIRA DESLIGAR O PROFIXIER BASTA IR EM: INICIAR>PROGRAMAS>PROFIXIER> Network Configurator E CLICAR EM REMOVE SETTINGS E DEPOIS CLICAR EM NEXT, DEPOIS FINISH.

 

Com o Profixier rodando vamos continuar o Tutorial. Executado todos os passos até agora, iremos configurar os outros programas.

 

Vá até a pasta system do seu Lineage II, e abra o l2.exe , digite seu login e senha em seguida minimize-o.

 

Vá até a pasta que está os programa do L2Walker, e entre na pasta Verify Server, copie o arquivo hosts, e cole-o no seguinte caminho do seu PC: C:WINDOWS\system32\drivers\etc .

 

Agora inicie o l2asrv, L2Fork e o C5 Toil e deixe-os minimizados.

 

imagem3cf4.jpg

 

Inicie o arquivo token.exe que está na pasta do L2Walker OGG 10.7.4 Interlude.

 

imagem1eh2.jpg

 

Em seguida com o L2Walker aberto, clique na aba Setup e depois em Opitions.

 

Deixe seu L2Walker configurado igual mostra a figura abaixo.

 

imagem2xf3.jpg

 

Em seguida retorne para a tela de Login do L2Walker digite seu login e senha.

 

Maximize a tela do l2.exe e deixe a tela do L2Walker, sobreposta a do l2.exe .

 

Agora você tem que ser rápido: No L2Walker, clique em Login, aguarde até que trave na parte que está mostrada na imagem abaixo.

 

imagemak0.jpg

 

Volte para a tela do L2.exe e clique em Log In aceite os termos, selecione o servidor que você irá LOGAR e clique em OK, nesta parte irá travar a tela do l2.exe , volte para a tela do L2Walker e aguarde seu char fazer LOGIN no servidor!!!

 

ads5a7a78.jpg

Posted

well, what did I do wrong, it sems to me I did everything right but when I try to open the token.exe it said it cannot find walker :S

 

Good morning!

 

I think it may be that your antivirus is blocking token.exe.

 

Disable your antivirus, then unzip the file L2Walker again, and try to run the token.exe.

 

Even so let's try another approach: take a picture of all your Windows Task Manager and put here so I can see if there is some active process that is blocking token.exe.

Posted

Ok this worked for me.. thanks verymuch... But what is the proxifier for?  and the other prog that run? Do they need to be running everytime u want to use the bot?

 

Good Afternoon!

 

Soon after their accounts to connect to the server L2Walker, you can disable the profixier:

 

To disable, just go to Start> Programs> PROFIXIER> Network Configurator> Remove Settings> Next> Finish.

 

If you want to quit can also l2asrv.exe, however leave the L2Fork and C5Toil open.

Posted

Why do you have to do all that junk to close the proxifier? Cant you just right click on it in the bottom right hand corner of your screen by the clock and just hit exit?

Posted

Why do you have to do all that junk to close the proxifier? Cant you just right click on it in the bottom right hand corner of your screen by the clock and just hit exit?

 

Well .. Do as you feel better. Just showing you the correct way to close the program. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Posts

    • 🏆 UPDATE: CLAN RACE — R$ 300 (PIX in Brazil, or the equivalent in USDT/PayPal) for the first clan ready for World B PvP Worlds opens on Friday, September 25, 19:00 BRT (GMT-3). Everyone starts together, from scratch. The challenge: the first clan with 9 members ready to enter World B wins. Ready = level 51, World C registered and the full C set equipped (weapon, armor and jewelry) with at least 3 attributes on each piece. Only Queen Ant stands between you and World B. Rules: main character only; 9 different people, each on their own PC; the server records the exact time each member became ready. Deadline: October 14. Sign up your clan on our Discord (link on the site): l2mog.com/pvp
    • 🚀 L2-Gold Custom PvP – Beta Test is LIVE! 🚀 Hey guys! We are opening a brand new Custom PvP server and looking for passionate players to help us test it out before the official grand opening! 💥 What we offer: High Rates & Custom PvP Gameplay Custom NPC Buffer, GM Shop & Global GK Balanced classes and epic custom items Interlude with c4 skills 🎁 Beta Rewards: Every active tester who reports bugs or gives feedback will receive Exclusive Custom Rewards on the official launch day! 🛑 No website needed yet! All files, patch, and support are inside our Discord. 🔗 Join Beta Test Here: [https://discord.gg/9qkSxQtTq]
    • "CAN YOU DO A BULGARIAN REVOLUT?" – WE DID. FIRST DRAFT, NO EDITS The request came in short: a photo of a bank card, Bulgaria, Revolut. We said yes and asked the only question that matters – what data. The client was on the road, asked for a couple of hours, then sent the lot: number, expiry, CVV, payment system, bank, cardholder name. Then came the part the client never sees: - ran the number through Luhn – the check digit has to add up, otherwise the card is dead the second anything automated looks at it - matched the BIN to the issuer: Revolut in Bulgaria isn't a "local bank", the cards run through Revolut Bank UAB. The number range has to actually belong there, not just start with the right digit - built the current design, not a five-year-old picture: vertical layout, flat laser print instead of embossing, correct chip module, contactless mark where it belongs - the payment system logo – with the right gradient where the circles overlap and the wordmark sitting exactly where it should. A small thing that kills half the fakes out there - and finally, physics. Plastic has to catch light: a highlight along the edge, a micro-shadow under the chip, a faint fingerprint. A phone shot, not a render Sent the draft for approval. The client looked it over, signed off with zero corrections – final files went out. One pass, no rework. A card is a deceptively simple document. Looks like a rectangle and sixteen digits. In reality it's maths in the number, a tie to the issuer, a current design and light on plastic. Miss any one of the four and the file gets exactly two seconds of attention. Need a card for a specific bank and country? Message us. We'll tell you straight what's realistic for your case – then build it. { all data published with the client's consent} › TG: @mustang_service_ms ( https:// t.me/ mustang_service_ms ) › Channel: Mustang Service ( https:// t.me/ +JPpJCETg-xM1NjNl ) #drawing #card #photoshop #revolut #case
    • ============================================================               CLExt Classic Interlude: v7.80 ============================================================   01. Fixed ValidateLocation handling and player/client position synchronization. 02. Added protection against invalid coordinates and characters falling under the map. 03. Improved XY/Z position and heading validation. 04. Fixed MoveToLocation and MoveToPawn packet conversion and target validation. 05. Fixed TargetSelected, TargetUnselected and MyTargetSelected packet handling. 06. Improved GeoData Z-location handling and disabled unsafe PathNode modifications. 07. Added ExUserInfoInventoryWeight support. 08. Fixed inventory weight and maximum load synchronization. 09. Fixed incorrect 0% inventory weight after character login. 10. Added automatic inventory weight updates after EnterWorld and inventory changes. 11. Added inventory weight packet spam protection and safe weight caching. 12. Fixed BuyList and SellList inventory, slot and weight synchronization. 13. Improved NPC target and Buy/Sell packet validation. 14. Reworked mail attachment inventory and weight validation. 15. Added all-or-nothing mail attachment receiving and safe retry handling. 16. Fixed stackable mail attachment validation and INT_MAX overflow protection. 17. Improved COD Adena validation and post-mail inventory weight refresh. 18. Improved Warehouse Deposit and Withdraw validation. 19. Added protection against malformed warehouse item counts, DBIDs and amounts. 20. Added warehouse INT_MAX, CItem and pSID validation. 21. Improved warehouse anti-dupe protection. 22. Reworked the HTML Cache system for improved stability and memory usage. 23. Added lazy HTML loading instead of loading ~20,000 files during startup. 24. Fixed HTML Cache startup crashes with large HTML collections. 25. Added thread-safe HTML Cache access and Clear/Reload support. 26. Added bad allocation, invalid HTML and oversized HTML protection. 27. Reduced HTML Cache RAM usage, startup allocations and disk I/O. 28. Added HTML Caching ON/OFF with live HTM loading support. 29. Fixed ToggleCachingHook and added VS2005-compatible live HTML handling. 30. Fixed ShortcutInit processing and skill synchronization order. 31. Improved shortcut item validation, augmentation handling and va_list safety. 32. Added LiveMode Ability Point system. 33. Added inventory-item-based Ability Points with configurable pointItemId. 34. Preserved the original level-based Ability Point system as fallback. 35. Fixed incorrect Ability Point display and inventory synchronization. 36. Improved Ability skill learning and point validation. 37. Improved OfflineShopRestore loading and FakePC/DBID handling. 38. Added safer OfflineShopRestore socket limits and batch processing. 39. Prevented thousands of restore sockets from loading simultaneously. 40. Added delayed, non-blocking OfflineShopRestore after server startup. 41. Improved OnEnterWorld initialization order and stability. 42. Improved inventory weight, SkillList and acquired-skill initialization after login. 43. Added VIP integration to the EnterWorld process. 44. Added safe UserExtData initialization without modifying the native User structure. 45. Improved duplicate Bronch Jewel and equipped-slot protection. 46. Improved Bracelet, Belt, Bronch and general UseItem validation. 47. Improved general packet, UserSocket, User, pSD and Creature validation. 48. Added safer INT32/INT64 packet handling and malformed-packet protection. 49. Improved L2Server startup memory usage and lazy resource loading. 50. Reduced unnecessary startup allocations. 51. Improved account-only KeyEngine authentication and remote account validation. 52. Removed account expiration-time requirements. 53. Added updater/restart design without requiring CLExtUpdate.exe. 54. Improved CLIEXT HWID, shared-memory and client/server version validation. 55. Improved ReadFile/WriteFile hooks and MemoryProtector handling. 56. Added UoPilot and Extreme Injector detection handling. 57. Reworked VIP point loading, saving and database synchronization. 58. Fixed VIP Level 0 initialization and first VIP activation. 59. Fixed vip.htm activation after login and from party-shared points. 60. Fixed VIP points being incorrectly reset before successful activation. 61. Improved VIP progression from Level 1 through Level 7. 62. Added proper VIP Level 7 MAX/DONE behavior with no Level 8 requirement. 63. Disabled further VIP point collection after reaching maximum level. 64. Reworked VIP BonusInfo/ReceiveVipInfo packet synchronization. 65. Fixed VIP tier, points, duration and level requirement packet fields. 66. Added VIP duration, tier, point and User validation protections. 67. Added safer 64-bit VIP EXP and party EXP calculations. 68. Preserved subclass maximum EXP protection. 69. Improved ItemDataEx validation during character loading. 70. Fixed augmentation loss during login, relog and server restart. 71. Added safe restoration of augmentation IDs directly from the database. 72. Added CItem, pSID, pExItem and User validation during ItemDataEx loading. 73. Improved Shadow Item mana and item lifetime loading. 74. Preserved item protection timeout data during character loading. 75. Added augmentation loading diagnostics and protected valid augmentation data. 76. Preserved database value 0 for genuinely non-augmented items. 77. Added RaidBoss Status synchronization with the World Map. 78. Fixed alive/dead RaidBoss status updates after spawn and death. 79. Added RaidBossStatus as the source of truth for RaidBoss map packets. 80. Fixed RaidBoss map status synchronization after server/database loading.
    • 🚀 L2AQUILA — GRAND OPENING TOMORROW! Lineage 2 Gracia Final — Like L2 Pride, but fresh. The server you've been waiting for opens tomorrow, Saturday 19/09, 16:00 (Greek time) — No Wipe · 24/7 · Anti-DDoS. ⚔️ What's inside: • EXP 9300x · SP 3000x · Adena 5500x · High drop • Max enchant +20 · Safe +3 · 24 buffs / 3 debuffs • 20 free Custom Coins for every new player on day one! • Custom farming zones (Cave of Trials, Cemetery, Ruins of Despair + more) • PvP Events · Olympiads · Offline Trading · Weddings · Balanced classes • Starter + Dynasty shops in every town — playable from minute one 📥 Download: Client + Patch at https://l2aquila.com/index.html 💬 Discord: discord.gg/5ZyBRvG4k · Facebook: facebook.com/l2aquila Be there at opening hour — bring your squad. See you at the Grand Opening! 🔥
  • Topics

×
×
  • Create New...

Important Information

This community uses essential cookies to function properly. Non-essential cookies and third-party services are used only with your consent. Read our Privacy Policy and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..