[Help] How to set up ipconfig.xml

[pelopidas]

Server.properties

 

 

# ---------------------------------------------------------------------------

# Game Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

#

# Note: External/Internal address definitions was moved to the ipconfig.xml

#

 

# Where's the Login server this gameserver should connect to

# Default: 127.0.0.1

LoginHost = 127.0.0.1

 

# TCP port the login server listen to for gameserver connection requests

# Default: 9014

LoginPort = 9014

 

# Bind address for gameserver. You should not need to change it in most cases.

# Default: * (0.0.0.0)

GameserverHostname = *

 

# Default: 7777

GameserverPort = 7777

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

loginserver.properties

 

 

 

# ---------------------------------------------------------------------------

# Login Server Settings

# ---------------------------------------------------------------------------

# This is the server configuration file. Here you can set up the connection information for your server.

# This was written with the assumption that you are behind a router.

# Dumbed Down Definitions...

# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.

# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).

# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.

# ---------------------------------------------------------------------------

# Networking

# ---------------------------------------------------------------------------

 

# Bind ip of the LoginServer, use * to bind on all available IPs

# Default: *

LoginserverHostname = *

 

# Default: 2106

LoginserverPort = 2106

 

# The address on which login will listen for GameServers, use * to bind on all available IPs

# Default: *

LoginHostname = *

 

# The port on which login will listen for GameServers

# Default: 9014

LoginPort = 9014

 

# The delay in minutes after which the login updates the gameservers IP's (usefull when their ip is dynamic)

# Default: 15

IpUpdateTime = 15

 

 

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

ipconfig.xml

 

 

 

<?xml version="1.0" encoding="UTF-8"?>

<!-- Externalhost here (Internet IP) or Localhost IP for local test -->

<gameserver address="l2-brutals.no-ip.org">

<!-- Localhost here -->

<define subnet="127.0.0.0/8" address="127.0.0.1" />

<!-- Internalhosts here (LANs IPs) -->

<define subnet="10.0.0.0/8" address="10.0.0.0" />

<define subnet="172.16.0.0/19" address="172.16.0.0" />

<define subnet="192.168.0.0/16" address="192.168.0.0" />

</gameserver>

 

 

 

 

 

Help me, what changes must i do! i have open ports but none can connect to my server :/

[FighterBoss]

first run cmd.exe and write there ipconfig..there you will get your LAN IP; next steps are at images ;)

 

1. Change this lines in ipconfig.xml file

 

 

2. This is server.properties file (just put there your LAN ip)

 

 

3. And this one is login.properties file (the same here like in 2nd step)

 

 

also put your WAN IP adress into your host file and if you got router you have to open ports(2106,9014,7777) as well....

 

hope it`ll helps you

 

Regards

[pelopidas]

how i put wan ip in host file?

 

 

like xx.xx.xx.x l2auth.lineage2.com  ?