[Tutorial]Tracing A Hacker

[ExTrEmEDwarf]

Sometimes, it's just not enough to simply know that there's a Trojan or Virus onboard. Sometimes you need to know exactly why that file is onboard, how it got there - but most importantly, who put it there.

 

By enumerating the attacker in the same way that they have enumerated the victim, you will be able to see the bigger picture and establish what you're up against. But how can you do this? Read on...

 

## Connections make the world go round ##

 

The computer world, at any rate. Every single time you open up a website, send an email or upload your webpages into cyberspace, you are connecting to another machine in order to get the job done. This, of course, presents a major problem, because this simple act is what allows malicious users to target a machine in the first place.

 

# How do these people find their victim?

 

Well, first of all, they need to get hold of the victim's IP Address. Your IP (Internet Protocol) address reveals your point of entry to the Internet and can be used in many ways to cause your online activities many, many problems. It may not reveal you by name, but it may be uniquely identifiable and it represents your digital ID while you are online (especially so if you're on a fixed IP / DSL etc).

 

With an IP address, a Hacker can find out all sorts of weird and wonderful things about their victim (as well as causing all kinds of other trouble, the biggest two being Portnukes/Trojans and the dreaded DoS ((Denial of Service)) attack). Some Hackers like to collect IP Addresses like badges, and like to go back to old targets, messing them around every so often. An IP address is incredibly easy to obtain - until recently, many realtime chat applications (such as MSN) were goldmines of information. Your IP Address is contained as part of the Header Code on all emails that you send and webpages that you visit can store all kinds of information about you. A common trick is for the Hacker to go into a Chatroom, paste his supposed website address all over the place, and when the unsuspecting victim visits, everything about your computer from the operating system to the screen resolution can be logged...and, of course, the all important IP address. In addition, a simple network-wide port scan will reveal vulnerable target machines, and a war-dialler will scan thousands of lines for exposed modems that the hacker can exploit.

 

So now that you know some of the basic dangers, you're probably wondering how these people connect to a victim's machine?

 

## Virtual and Physical Ports ##

 

Everything that you recieve over the Internet comes as a result of other machines connecting to your computer's ports. You have two types; Physical are the holes in the back of your machine, but the important ones are Virtual. These allow transfer of data between your computer and the outside world, some with allocated functions, some without, but knowing how these work is the first step to discovering who is attacking you; you simply MUST have a basic knowledge of this, or you won't get much further.

 

# What the phrases TCP/UDP actually mean

 

TCP/IP stands for Transmission Control Protocol and Internet Protocol, a TCP/IP packet is a block of data which is compressed, then a header is put on it and it is sent to another computer (UDP stands for User Datagram Protocol). This is how ALL internet transfers occur, by sending packets. The header in a packet contains the IP address of the one who originally sent you it. Now, your computer comes with an excellent (and free) tool that allows you to see anything that is connected (or is attempting to connect) to you, although bear in mind that it offers no blocking protection; it simply tells you what is going on, and that tool is NETSTAT.

 

## Netstat: Your first line of defence ##

 

Netstat is a very fast and reliable method of seeing exactly who or what is connected (or connecting) to your computer. Open up DOS (Start/Programs/MS-DOS Prompt on most systems), and in the MSDOS Prompt, type:

 

netstat -a

 

(make sure you include the space inbetween the "t" and the "a").

 

If you're connected to the Internet when you do this, you should see something like:

 

 

Active Connections

 

Proto Local Address Foreign Address State

TCP macintosh: 20034 modem-123.tun.dialup.co.uk: 50505 ESTABLISHED

TCP macintosh: 80 proxy.webcache.eng.sq: 30101 TIME_WAIT

TCP macintosh MACINTOSH: 0 LISTENING

TCP macintosh MACINTOSH: 0 LISTENING

TCP macintosh MACINTOSH: 0 LISTENING

 

 

Now, "Proto(col)" simply means what kind of data transmission is taking place (TCP or UDP), "Local address" is your computer (and the number next to it tells you what port you're connected on), "Foreign Address" is the machine that is connected to you (and what port they're using), and finally "State" is simply whether or not a connection is actually established, or whether the machine in question is waiting for a transmission, or timing out etc.

 

Now, you need to know all of Netstat's various commands, so type:

 

netstat ?

 

You will get something like this:

 

 

Displays protocol statistics and current TCP/IP network connections.

 

NETSTAT [-a] [-e] [-n] [-s] [-p proto] [-r] [interval]

 

-a Displays all connections and listening ports.

-e Displays Ethernet statistics. This may be combined with the -s option.

-n Displays addresses and port numbers in numerical form.

-p proto Shows connections for the protocol specified by proto; proto may be TCP or UDP. If used with the -s option to display per-protocol statistics, proto may be TCP, UDP, or IP.

-r Displays the routing table.

-s Displays per-protocol statistics. By default, statistics are shown for TCP, UDP and IP; the -p option may be used to specify a subset of the default.

 

 

Have a play around with the various options, but the most important use of these methods is when you combine them. The best command to use is

 

netstat -an

 

because this will list all connections in Numerical Form, which makes it a lot easier to trace malicious users....Hostnames can be a little confusing if you don't know what you're doing (although they're easily understandable, as we shall see later). Also, by doing this, you can also find out what your own IP address is, which is always useful.

 

Also,

 

netstat -b

 

will tell you what ports are open and what programs are connecting to the internet.

 

## Types of Port ##

 

It would be impossible to find out who was attacking you if computers could just access any old port to perform an important function; how could you tell a mail transfer from a Trojan Attack? Well, good news, because your regular, normal connections are assigned to low, commonly used ports, and in general, the higher the number used, the more you should be suspicious. Here are the three main types of port:

 

# Well Known Ports These run from 0 to 1023, and are bound to the common services that run on them (for example, mail runs on channel 25 tcp/udp, which is smtp (Simple Mail Transfer Protocol) so if you find one of these ports open (and you usually will), it's usually because of an essential function.

 

# Registered Ports These run on 1024 to 49151. Although not bound to a particular service, these are normally used by networking utilities like FTP software, Email client and so on, and they do this by opening on a random port within this range before communicating with the remote server, so don't panic (just be wary, perhaps) if you see any of these open, because they usually close automatically when the system that's running on them terminates (for example, type in a common website name in your browser with netstat open, and watch as it opens up a port at random to act as a buffer for the remote servers). Services like MSN Messenger and ICQ usually run on these Ports.

[ExTrEmEDwarf]

# Dynamic/Private Ports Ranging from 49152 to 65535, these things are rarely used except with certain programs, and even then not very often. This is indeed the usual range of the Trojan, so if you find any of these open, be very suspicious. So, just to recap:

 

 

Well Known Ports 0 to 1023 Commonly used, little danger.

Registered Ports 1024 to 49151 Not as common, just be careful.

Dynamic/Private Ports 49152 to 65535 Be extremely suspicious.

 

 

## The hunt is on ##

 

Now, it is essential that you know what you're looking for, and the most common way someone will attack your machine is with a Trojan. This is a program that is sent to you in an email, or attempts to bind itself to one of your ports, and when activated, it can give the user your passwords, access to your hard drive...they can even make your CD Tray pop open and shut. At the end of this Document, you will find a list of the most commonly used Trojans and the ports they operate on. For now, let's take another look at that first example of Netstat....

 

 

 

Active Connections

 

Proto Local Address Foreign Address State

TCP macintosh: 27374 modem-123.tun.dialup.co.uk: 50505 ESTABLISHED

TCP macintosh: 80 proxy.webcache.eng.sq: 30101 TIME_WAIT

TCP macintosh MACINTOSH: 0 LISTENING

TCP macintosh MACINTOSH: 0 LISTENING

TCP macintosh MACINTOSH: 0 LISTENING

 

 

Now, straight away, this should make more sense to you. Your computer is connected on two ports, 80 and 27374. Port 80 is used for http/www transmissions (ie for all intents and purposes, its how you connect to the net, although of course it's a lot more complicated than that). Port 27374, however, is distinctly suspicious; first of all, it is in the registered port range, and although other services (like MSN) use these, let's assume that you have nothing at all running like instant messengers, webpages etc....you're simply connected to the net through proxy. So, now this connection is looking even more troublesome, and when you realise that 27374 is a common port for Netbus (a potentially destructive Trojan), you can see that something is untoward here. So, what you would do is:

 

 

1) run Netstat , and use:

 

Netstat -a

 

then

 

Netstat -an

 

So you have both Hostnames AND IP addresses.

 

 

## Tracerouting ##

 

Having the attacker's IP is all well and good, but what can you do with it? The answer is, a lot more! It's not enough to have the address, you also need to know where the attacker's connections are coming from. You may have used automated tracerouting tools before, but do you jknow how they work?

 

Go back to MSDOS and type

 

 

tracert *type IP address/Hostname here*

 

 

Now, what happens is, the Traceroute will show you all the computers inbetween you and the target machine, including blockages, firewalls etc. More often than not, the hostname address listed before the final one will belong to the Hacker's ISP Company. It'll either say who the ISP is somewhere in there, or else you run a second trace on the new IP/hostname address to see who the ISP Company in question is. If the Hostname that you get back doesn't actually seem to mention an actual geographical location within its text, you may think all is lost. But fear not! Suppose you get a hostname such as

 

http://www.haha.com

 

Well, that tells us nothing, right? Wrong....simply enter the hostname in your browser, and though many times you will get nothing back, sometimes it will resolve to an ISP, and from there you can easily find out its location and in what areas they operate. This at least gives you a firm geographical location to carry out your investigations in.

 

If you STILL have nothing, as a last resort you COULD try connecting to your target's ISP's port 13 by Telnet, which will tell you how many hours ahead or behind this ISP is of GMT, thus giving you a geographical trace based on the time mentioned (although bear in mind, the ISP may be doing something stupid like not having their clocks set correctly, giving you a misleading trace. Similarly, a common tactic of Hackers is to deliberately have their computer's clock set to a totally wrong time, so as to throw you off the scent). Also, unless you know what you're doing, I wouldn't advise using Telnet (which is outside the parameters of this tutorial).

 

## Reverse DNS Query ##

 

This is probably the most effective way of running a trace on somebody. If ever you're in a chatroom and you see someone saying that they've "hacked into a satellite orbiting the Earth, and are taking pictures of your house right now", ignore them because that's just bad movie nonsense. THIS method is the way to go, with regard to finding out what country (even maybe what State/City etc) someone resides, although it's actually almost impossible to find an EXACT geographical location without actually breaking into your ISP's Head Office and running off with the safe.

 

To run an rDNS query, simply go back to MS-DOS and type

 

netstat

 

and hit return. Any active connections will resolve to hostnames rather than a numerical format.

 

# DNS

 

DNS stands for Domain Name Server. These are machines connected to the Internet whose job it is to keep track of the IP Addresses and Domain Names of other machines. When called upon, they take the ASCII Domain Name and convert it to the relevant numeric IP Address. A DNS search translates a hostname into an IP address....which is why we can enter "www.Hotmail.com" and get the website to come up, instead of having to actually remember Hotmail's IP address and enter that instead. Well, Reverse DNS, of course, translates the IP Address into a Hostname (ie - in letters and words instead of numbers, because sometimes the Hacker will employ various methods to stop Netstat from picking up a correct Hostname).

 

So, for example,

 

298.12.87.32 is NOT a Hostname.

mail6.bol.net.au IS a Hostname.

 

Anyway, see the section at the end? (au) means the target lives in Australia. Most (if not all) hostnames end in a specific Country Code, thus narrowing down your search even further. If you know your target's Email Address (ie they foolishly sent you a hate mail, but were silly enough to use a valid email address) but nothing else, then you can use the Country codes to deduce where they're from as well. You can also deduce the IP address of the sender by looking at the emails header (a "hidden" line of code which contains information on the sender)...on Hotmail for example, go to Preferences, and select the "Full Header's Visible" option. Alternatively, you can run a "Finger" Trace on the email address, at:

 

www.samspade.org

 

Plus, some ISP's include their name in your Email Address with them too (ie Wanadoo, Supanet etc), and your Hacker may be using an email account that's been provided by a Website hosting company, meaning this would probably have the website host's name in the email address (ie Webspawners). So, you could use the information gleaned to maybe even hunt down their website (then you could run a website check as mentioned previously) or report abuse of that Website Provider's Email account (and thus, the Website that it goes with) to

 

abuse@companynamegoeshere.com

 

If your Hacker happens to reside in the USA, go to:

 

www.usps.gov/ncsc/lookups/abbr_state.txt

 

for a complete list of US State abbreviatons.

 

## List of Ports commonly used by Trojans ##

 

Please note that this isn't a complete list by any means, but it will give you an idea of what to look out for in Netstat. Be aware that some of the lower Ports may well be running valid services.

 

UDP: 1349 Back Ofrice DLL

31337 BackOfrice 1.20

31338 DeepBO

54321 BackOfrice 2000

 

 

TCP: 21 Blade Runner, Doly Trojan, Fore, Invisible FTP, WebEx, WinCrash

23 Tiny Telnet Server

25 Antigen, Email Password Sender, Haebu Coceda, Shtrilitz Stealth, Terminator, WinPC, WinSpy, Kuang2 0.17A-0.30

31 Hackers Paradise

80 Executor

456 Hackers Paradise

555 Ini-Killer, Phase Zero, Stealth Spy

666 Satanz Backdoor

1001 Silencer, WebEx

1011 Doly Trojan

1170 Psyber Stream Server, Voice

1234 Ultors Trojan

1243 SubSeven 1.0 - 1.8

1245 VooDoo Doll

1492 FTP99CMP

1600 Shivka-Burka

1807 SpySender

1981 Shockrave

1999 BackDoor 1.00-1.03

2001 Trojan Cow

2023 Ripper

2115 Bugs

2140 Deep Throat, The Invasor

2801 Phineas Phucker

3024 WinCrash

3129 Masters Paradise

3150 Deep Throat, The Invasor

3700 Portal of Doom

4092 WinCrash

4567 File Nail 1

4590 ICQTrojan

5000 Bubbel

5000 Sockets de Troie

5001 Sockets de Troie

5321 Firehotcker

5400 Blade Runner 0.80 Alpha

5401 Blade Runner 0.80 Alpha

5402 Blade Runner 0.80 Alpha

5400 Blade Runner

5401 Blade Runner

5402 Blade Runner

5569 Robo-Hack

5742 WinCrash

6670 DeepThroat

6771 DeepThroat

6969 GateCrasher, Priority

7000 Remote Grab

7300 NetMonitor

7301 NetMonitor

7306 NetMonitor

7307 NetMonitor

7308 NetMonitor

7789 ICKiller

8787 BackOfrice 2000

9872 Portal of Doom

9873 Portal of Doom

9874 Portal of Doom

9875 Portal of Doom

9989 iNi-Killer

10067 Portal of Doom

10167 Portal of Doom

10607 Coma 1.0.9

11000 Senna Spy

11223 Progenic trojan

12223 Hack?99 KeyLogger

12345 GabanBus, NetBus

12346 GabanBus, NetBus

12361 Whack-a-mole

12362 Whack-a-mole

16969 Priority

20001 Millennium

20034 NetBus 2.0, Beta-NetBus 2.01

21544 GirlFriend 1.0, Beta-1.35

22222 Prosiak

23456 Evil FTP, Ugly FTP

26274 Delta

30100 NetSphere 1.27a

30101 NetSphere 1.27a

30102 NetSphere 1.27a

31337 Back Orifice

31338 Back Orifice, DeepBO

31339 NetSpy DK

31666 BOWhack

33333 Prosiak

34324 BigGluck, TN

40412 The Spy

40421 Masters Paradise

40422 Masters Paradise

40423 Masters Paradise

40426 Masters Paradise

47262 Delta

50505 Sockets de Troie

50766 Fore

53001 Remote Windows Shutdown

54321 SchoolBus .69-1.11

61466 Telecommando

65000 Devil

 

 

## Summary ##

 

I hope this tutorial is useful in showing you both how to secure yourself against unwanted connections, and also how to determine an attacker's identity. The Internet is by no means as anonymous as some people think it is, and although this is to the detriment of people's security online, this also works both ways....it IS possible to find and stop even the most determined of attackers, you just have to be patient and keep hunting for clues which will help you put an end to their exploits.

 

 

Added on 2 posts, cuz there are more than 20000 characters

 

credits to crazycoder.

[Raigon]

I never had problems with hackers but that`s really usefull and maybe i will use it someday...anyway i copied into .txt file XD

 

Good job ! =P

[jungl3]

I never had problems with hackers but that`s really usefull and maybe i will use it someday...anyway i copied into .txt file XD

 

Good job ! =P [2]

[Jigsaw*]

really really good job ExTrEmEDwarf..

 

I think that there is also some programs for tracing hackers but your manual is awesome!

[victorbruno]

Useful! Make us a litle safer.

[laverna]

is so.......!

[Lucky Dice]

is so.......!

So..?

Dont Spam >.<

[Rasbus2]

I hope I wont have to use it - but if I have to this will surely help me! :D

[˚°▫•Eмiизм●▫°˚™]

really good job ExTrEmEDwarf..

Keep sharing

[invgmr]

Good job, nice post!