Welcome to MaxCheaters.com

Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads

[Guide] L2NET - Starting up + Using it


Recommended Posts

Hello guys,,

 

I know there are already some guides about l2net, but well wrote this for another forum, so always sharring it here :)

 

In this guide ill explain you how to start up your l2net. You may think this is easy, well it is! But still a lot of people have problems with it.

Afther this guide you will be able to connect to your server without problems (unless they got the newest or good selfmade protections ofcourse)

 

I had L2Net on WindowsXP and Windows7 and it runs perfectly, not sure about vista so you will have to figure that out yourself a bit :).

 

Goodluck



 

Downloading

 

To download l2net go to this site > http://l2net.insane-gamers.com/

 

You will get this menu on the site >

 

124y1eh.png

 

We will just need a few tabs, wont take long

So in this guide ill explain l2net for Freya, since its the most recent version.

 

Go in the menu to CT1 - Freya L2NET

 

Download the first 2 files (the other 2 are not needed, those are maps for when you wanna play OOG, but you can also do this without :) )

 

Wait untill the files are downloaded and extract the 2 files in the SAME folder. First extract the Datapack (second download) and afther that the the L2net (v388)

 

169qa8n.png

 

When you are ready with extracting it all your folder will look something like this:

 

33xkohw.png

 

(I might have some more files since i already used l2net, sorry for that)

 

So, now you downloaded l2net but we arnt ready yet. You will still need 2 small programs to be able to run L2NET

You can find these 2 also on the site of L2net > http://l2net.insane-gamers.com/

These programs are from microsoft, but arnt originally installed.

Download NET Framework 4.0 and DirectX. You can find these here >

 

2uft2fc.png

 

Also install these, its really easy :p.

 

Now you are ready! You can launch your L2NET by using L2NET.exe (Picachu)

 

I will explain you how to connect to a server, and how to use L2NET in my second Guide, wich is linked down here.

 



If you dont get any error, then you did everything right :).

If you might get an error it will mostly tell you whats wrong, if not try to google the error code and you will find how to fix it.



 

This was my small guide about how to install/start-up L2NET, i hope it works without many problems.

 

Credits: Michael

 

Share this post


Link to post
Share on other sites
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Hello again guys,,

 

In this guide im going to explain you how to use L2NET as bot.

I will explain IG and OOG botting adn where you can use it for.

 

In a second part of the guide ill explain basics of scripting in L2NET, first i wanted to make a seperate guide for this, but it can be all made in one since its related to eachother anyway.

 



 

I would like to start this guide by explaining IG, wich stands for In-Game,, This means you got L2NET connected to your server, but besides L2NET you also got a normal client open.

We use this basicly to bot if you got Gm`s checking for bots 24/7, then you can react them more easly then using OOG or when you use L2NET to spam mp/cp/hp pots, i will explain this all later this guide.

 

OOG means that you operate your character out of L2NET, this doesnt require an L2Client,, The advantage of this is that it doesnt make your client lag. This side of L2NET is mainly used for servers where botting is allowed (rare) or for buffers.

 



 

How to connect to your server using L2NET In-Game (IG)

 

You already know how to open L2NET now, if not follow the guide above

 

To use L2NET IG first open your L2NET using L2NET.exe (Picachu).

You will get this screen:

 

eu1wdi.png

 

Make sure you got Freya ticked on, or whatever client you will be using.

 

Now we are going to log. click at the button "IG".

He will ask for the IP of the server, loginport, local IP and another port.

 

To get the IP of the server you will need L2FileEdit (You can download it here > http://depositfiles.com/en/files/7k62o84ec  Credits to CriticalError)

 

Open L2FileEdit and you will get this:

 

saxvd5.png

 

Now click open and search for the file "L2.ini" in your System folder from the server.

Open it and you will get this >

 

33mr21v.png

 

You can see now the IP at the server, its written at "ServerAddr=...."

This IP is what we need :)

 

Back to L2NEt now, and fill in the IP, fill in the other fields as you can see on my screen above.

When you filled everything in press "Listen"

 

Now we are going to do it a bit diffrent then normal. Instead of starting our lineage by using L2.exe we are gonna use a little other file

this will help us to get trough easy protections, it wont help against good protections (sorry)

 

You will have to download this file > its just a few mb big > http://www.megaupload.com/?d=CXPHFXW5

 

Extract these files into your System folder (if needed overwrite files)

This file will create another file called "Run.bat". (Run.bat is similar to L2.exe and basicly acts the same)

 

So you still have your L2NET open, including all the info's filled in.

Now double click "Run.bat", this will open a black screen (dont mind that) and then your l2 will start-up.

 

When your L2 started up you can close the black screen and log-in at Lineage2 just as normal.

 

Great job You logged into the server using including a bot program :)

 



 

Why use L2NET In-game?

 

As i told before, its mainly used for spamming items and a bit less for botting.

I will explain you in this part how to use L2NEt to spam items, the botting part is the same as OOG wich i will explain later.

 

Good, you got your account logged with L2NET IG.

Go to your L2NET and click "Bot options".

Go to the tab "Items", here we will do it all.

 

an2adt.png

 

We will be using a few boxes

 

1. Tick on the box under "On"

2. Chose at "Trait" what you want to recover (mp/cp/hp/...)

3. Chose at "Item" what item L2NET has to use to recover it.

4. At "XX<%" you can fill in under what % of mp/cp/hp he has to use the item

5. at "Delay" you can chose how fast he has to use the items (This is in milliseconds, 1 Second = 1000 milliseconds)

 

When you filled everything in press "Add". You will see it will be listed down there.

 

When you filled everything in you need press "Apply" to use all options, Afther "Apply" click "Close" to close the window.

 

L2NET will take care of your pots now, goodluck!

 



 

How to use L2NET OOG

 

OOG is used mainly for 2 things, Buffers and Bots.

 

Lets first login using OOG. Now we wont need a l2-client, this means less lags for your main char in-game :)

 

So Open your L2NET and click the button "OOG"

 

width=1024 height=713http://i51.tinypic.com/eu1wdi.png[/img]

 

You will get this screen:

 

width=1024 height=712http://i56.tinypic.com/2agudrp.png[/img]

 

As you can see you will need the server IP again, you can get it like this:

 

To get the IP of the server you will need L2FileEdit (You can download it here > http://depositfiles.com/en/files/7k62o84ec  Credits to CriticalError)

 

Open L2FileEdit and you will get this:

 

saxvd5.png

 

Now click open and search for the file "L2.ini" in your System folder from the server.

Open it and you will get this >

 

33mr21v.png

 

You can see now the IP at the server, its written at "ServerAddr=...."

This IP is what we need :)

 

Now that we got the server IP you can fill it in.

Fill in your ID and Pass and click "Logon"

 

You will see the server name will appear in the first box, click it and press "Select Server"

Then you will see all characters that you have on this account, select the character you want and click "Select Char"

 

oke,, Well done, you are logged into the server by using only L2NET!

 



 

Botting with L2NET using OOG

 

oke, we are logged in now and our character is ready for use.

Make sure you put your bot in the right area since walking and porting in L2NET isnt really easy...

 

When your bot is on the right spot go to "Bot options"

search the tab "Combat", you will get this:

 

wl3xv4.png

 

Lets explain how to set it up.

 

Dont watch the first few boxes, we wont be using those.

We will use just 4 boxes: Shortcut, Page, Delay and MP

 

In the box under "Shortcut" you must write the number of the skill in what shortcut he is.

This are your shortcuts: (Can be from 1 to 12)

 

2ztdcep.png

 

In the box under "Page" you must write the number of the skill in what page it is.

This are your pages: (Can be from 1 to 10)

 

28hlogo.png

 

In the box delay you can chose every how many seconds he must use the skill, its in milliseconds (1 Second = 1000 Milliseconds)

 

In the box MP you can keep this on "100", this box means that the bot may use the skill only when your mp is higher then the number you filled in.

 

When you filled everything in press "Add"

 

We are not ready yet, Now go to the tab "Autofighter"

 

If you use a fighter class as bot click at "Active Target" and "Active attack"

If you use a mage classs as bot click at "Active target"

 

The rest may remain the same. when you filled everything in you can press "Apply", you will see your bot will start farming already!

 



 

Buffers using L2NET OOG

 

There are several ways to do this, but still i prefer the way of using a Script.

This is easy because the commands are rather easy to write and you can start your buffer with a few clicks :)

 

I will learn you the basics of L2NET scripting using voice-commands, this means that you will have to say something to your bot, then he will buff you.

 

Go to your L2NET folder

and open the folder "IDE"

In this folder you will see a program called "JingJing_IDE", with this program you can make and edit L2NET scripts.

 

Open the program and you will see this >

 

width=1024 height=766http://i53.tinypic.com/fjjl15.png[/img]

 

Your program will automaticly open a clean script. However, ill give you a script from me wich you can edit.

This saves a lot of time for me and for you, and basicly you can keep using the script over and over.

 

This script is to get COV from an OOG-buffer using voice-commands: http://www.megaupload.com/?d=5QA9XM48

 

This is how the script looks like:

 

DEFINE INT SCAN_CHAT 1
DEFINE_GLOBAL INT X 0
DEFINE_GLOBAL INT Y 0
DEFINE_GLOBAL INT Z 0
DEFINE_GLOBAL INT RANGE 0
DEFINE_GLOBAL INT DIST 0

PRINT_TEXT "OOG Buffer COV Started!"
X = CHAR_X
Y = CHAR_Y
Z = CHAR_Z


WHILE SCAN_CHAT == ONE

SET_EVENT "<&SCRIPTEVENT_CHAT&>" "<&SYSTEM_CURRENTFILE&>" parsechat
SLEEP 1500
CALL MOVER VOID 3 X Y Z
WEND
END_SCRIPT



FUNCTION parsechat

DEFINE STRING MSG_BUFF "hello"
DEFINE STRING MSG_BUFF2 "cov"
DEFINE STRING MSG_COMMANDS "commands"
DEFINE STRING MSG_LEAVEPT "Leave"
DEFINE STRING MSG_LOGOFF "logout"
DEFINE STRING MSG_PARTY "Buffs"
DEFINE STRING MSG_NEED "commands"
       
IF MESSAGETYPE == CHANNEL_PARTY

    IF MESSAGE == MSG_BUFF
              SAY_TEXT "<&CHANNEL_PARTY&>" "Hello <&SenderName&> need cov?"
              COMMAND "/target <&SenderName&>"
              SLEEP 500
              USE_SKILL 1442
              SLEEP 2000
              //COMMAND "/leave"
       ENDIF

    IF MESSAGE == MSG_BUFF2
              SAY_TEXT "<&CHANNEL_PARTY&>" "Goodluck with cov!"
              COMMAND "/target <&SenderName&>"
              SLEEP 500
              USE_SKILL 1363
              SLEEP 1000
              COMMAND "/leave"
       ENDIF
       IF MESSAGE == MSG_COMMANDS
              SAY_TEXT "<&CHANNEL_PARTY&>" "Current Commands: dweap, dshield"
              SLEEP 1000
       ENDIF

       IF MESSAGE == MSG_LEAVEPT
              SAY_TEXT "<&CHANNEL_PARTY&>" "leaving party..."
              COMMAND "/leave"
       ENDIF

       IF MESSAGE == MSG_LOGOFF
                SAY_TEXT "<&CHANNEL_PARTY&>" "Logging OUT NOW!!"
                CALLSUB LOGOUT
       ENDIF

ENDIF

IF MESSAGETYPE == CHANNEL_PRIVATE
       IF MESSAGE == MSG_PARTY
              COMMAND "/invite <&SenderName&>"
              SLEEP 500
       ENDIF
       IF MESSAGE == MSG_LEAVEPT
              SAY_TEXT "<&CHANNEL_PARTY&>" "leaving party..."
              COMMAND "/leave"
       ENDIF
ENDIF

IF MESSAGETYPE == CHANNEL_ALLY
         IF MESSAGE == MSG_NEED
         SAY_TEXT "<&CHANNEL_ALLY&>" "PM me and say Buffs, in party say COV."
         ENDIF
ENDIF

RETURN VOID

SUB LOGOUT
 FORCE_LOG
RETURNSUB

//---------------------Mover_walking Function
FUNCTION MOVER 3 X Y Z
DEFINE INT AUX 0
DEFINE INT MAX_TENTA 45
DEFINE INT DIST_VERIFI 0
DEFINE INT DIST_VELHA 0
DEFINE INT OUTRA_DIST 0
DISTANCE OUTRA_DIST X Y Z CHAR_X CHAR_Y CHAR_Z
//PRINT_TEXT "Move Distance of <&OUTRA_DIST&>"
MOVE_TO "<&X&>" "<&Y&>" "<&Z&>"
SLEEP 500
DO
   DISTANCE DIST_VERIFI X Y Z CHAR_X CHAR_Y CHAR_Z
   MOVE_TO "<&X&>" "<&Y&>" "<&Z&>"
   SLEEP 500
   DISTANCE DIST_VELHA X Y Z CHAR_X CHAR_Y CHAR_Z
   IF DIST_VERIFI <= DIST_VELHA
       AUX = AUX + ONE
   ENDIF

   DISTANCE OUTRA_DIST X Y Z CHAR_X CHAR_Y CHAR_Z
LOOP OUTRA_DIST >= "#I35"
RETURN VOID

 

Explination of the diffrent commands:

 

FUNCTION parsechat

DEFINE STRING MSG_BUFF "hello"
DEFINE STRING MSG_BUFF2 "cov"
DEFINE STRING MSG_COMMANDS "commands"
DEFINE STRING MSG_LEAVEPT "Leave"
DEFINE STRING MSG_LOGOFF "logout"
DEFINE STRING MSG_PARTY "Buffs"
DEFINE STRING MSG_NEED "commands"[/Code]

 
This are your commands, MSG_(name) is the name wich refers to the lines in the script itself
the word between " " is the command you use ingame. 
 
[code]IF MESSAGETYPE == CHANNEL_PARTY

 

This line refers to the chat where the commands will be written (In this case in your party chat)

 

 IF MESSAGE == MSG_BUFF
              SAY_TEXT "<&CHANNEL_PARTY&>" "Hello <&SenderName&> need cov?"
              COMMAND "/target <&SenderName&>"
              SLEEP 500
              USE_SKILL 1442
              SLEEP 2000
              //COMMAND "/leave"
       ENDIF

 

This is 1 command, as you can see this is the command wich is liked to MSG_BUFF

Under this you can see a few codes:

- SAY_TEXT > is the command to say something in a chat (you can see how its used above)

- USE_SKILL > is the command to use a skill (You can find skill ID's by opening "Skillname-e.dat" in your system folder; this can be opened by using l2FileEdit)

- SLEEP > this is the most important command, you need to use this afther every other command. This is a break for the bot before he moves to the next command, if you dont use SLEEP commands you got a chance that your bot will get stucked or skips some lines.

I recommend you to use a sleep of 1000-2000, this is 1-2 seconds, so really not a problem.

 

Afther every "IF" command you got "ENDIF" to close the command, dont forget these!


 

When you finished your scripts save it and close the program.

 

To start your buffer log-in OOG, as i explained above.

 

When you are in L2NET chose the tab "Scripting"

chose for "Set Script Main" and search the script you just made.

Now go back to "Scripting" and press "Start Script"

 

And your bot is up and running :)

 

Now log your main char and test it out!

 




 

This was my guide about using L2NET, I hope it was a bit usefull and i hope you understand it :)

Sorry if it contains some spelling mistakes... but even im not perfect.

 

Credits: Michael

Share this post


Link to post
Share on other sites

Awesome guide meng,though there are already many of these

 

also,i suggest using netstat -n to find IP instead of L2.ini

 

(remove this hellcoders link)

 

Share this post


Link to post
Share on other sites

Awesome guide meng,though there are already many of these

 

also,i suggest using netstat -n to find IP instead of L2.ini

 

(remove this hellcoders link)

 

 

Sry,, already deleted to links at the bottom, forgot those xD

 

Thanks both

Share this post


Link to post
Share on other sites
  • 2 weeks later...

yes, ty for all! just me char make target,target and cannot see the target, how i can make setting for change target?

 

sry me bad eng.

 

That`sj a big problem that I had with l2net =/ try to let the option ~auto unstuck~ marked and if you are using a close fighter also marks the option ~walk befora atack~(something like that).

 

good luck!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.